Lenovo LJ2200 printer causes computer to freeze

Updated on technology 2024-04-10
9 answers
  1. Anonymous users2024-02-07

    It is recommended to report for repair, it may be that the test is not in place when developing the product, and there has been an HP host that is not compatible with HP's printer, hehe, very interesting.

  2. Anonymous users2024-02-06

    Are you in a room, last time I also had such a thing, in my room the computer keeps restarting, and I am almost annoyed when it crashes frequently. Later, I found out that there was a problem with the air conditioner, and as soon as I turned on the air conditioner, the computer was restarted, and there was no problem when I turned off the air conditioner. Then you try that part next to you, and good luck.

  3. Anonymous users2024-02-05

    Some of the configurations inside are not compatible.

  4. Anonymous users2024-02-04

    Change the printer driver

  5. Anonymous users2024-02-03

    Lenovo printer LJ2200 causes the computer to crash after booting, this must be a software problem, should be viewed as follows:

    Turn off the printer, it is best to unplug the power supply, and turn it on after about 1-2 minutes to test whether it is normal;

    Change the computer to test it, if there is no problem with changing the computer, it is a problem with the computer, and it can only be solved by reinstalling the system;

    The above methods can solve 99% of the problems, if it is still not solved, it is recommended that you go to Lenovo's printer after-sales service store to consult, after all, Lenovo is a big brand, after-sales service, I hope to solve your problem. Lenovo image is now out of the collar series,The printing speed and the appearance of the device are very wow,Consumables are cheap,If you have the ability, it is recommended to replace it,After all, the new electronic products are still easy to use。

  6. Anonymous users2024-02-02

    Hello, Lenovo LJ2200 printer printing status error may be due to the following reasons:1If the printer driver is not installed correctly, or if the wrong driver is installed, you can try reinstalling the correct driver.

    2.The hardware of the printer may be faulty, you can try to check the printer's power cord, interface cable, print head and other parts to see if there is any damage or poor contact. 3.

    The printer's software may be faulty, you can try to check the printer's software settings to see if there are any wrong settings. 4.If there is a problem with the printer's paper touchability, you can try to check if the printer's paper is damaged or if the paper is the correct size.

    If all of the above rules out, you can try reinstalling the printer's driver, or contact Lenovo customer service for technical support.

  7. Anonymous users2024-02-01

    Hello, it is a pleasure to serve you and give you the following answers:1Reason:

    Lenovo LJ2200 printer print status error can be caused by corrupted printer driver, printer hardware failure, improper printer settings, etc. 2.Workaround:

    1) Check if the printer driver is damaged, if it is, reinstall the printer driver. (2) Check whether the hardware of the printing Chunyou machine is faulty, if there is a fault, please replace the printer hardware. (3) Check if the printer settings are correct, if not, please set the printer again.

    3.Step 1: (1) First, check if the printer driver is corrupted and if it is, reinstall the printer driver.

    2) Secondly, check if the printer hardware is faulty, if there is a fault, please replace the Shengqin printer hardware. (3) Finally, check if the printer settings are correct, if not, set the printer again. 4.

    Personal Tips: (1) Check your printer driver regularly to make sure it's working properly. (2) Regularly check the printer hardware to ensure that it is operating properly.

    3) Check the printer settings regularly to make sure it is set up correctly.

  8. Anonymous users2024-01-31

    Hello, it is a pleasure to serve you and give you the following answers:1Reason:

    The Lenovo LJ2200 printer printing status error may be caused by the printer driver damage, printer hardware failure, poor printer line contact, printer paper setting not answering, and the tape is correct. 2.Workaround:

    1) Check if the printer driver is corrupted and if it is, reinstall the driver. (2) Check whether the printer hardware is faulty, if there is a fault, please repair it in time. (3) Check whether the printer line contact is good, if it is bad, please re-wire.

    4) Check whether the printer paper is set correctly, if the clear reed fruit is incorrect, please set it again. 3.Personal Tips:

    1) Check the printer driver regularly to make sure it is working properly. (2) Regularly inspect the printer hardware, find faults in time and repair them in time. (3) Regularly check the printer line contact to ensure that the contact is good.

    4) Check the printer paper settings regularly to make sure the settings are correct.

  9. Anonymous users2024-01-30

    Hello, it is a pleasure to serve you and give you the following answers:1Reason:

    Lenovo LJ2200 printer printing status error may be caused by printer driver damage, printer hardware failure, printer line poor contact, printer paper setting incorrectly, etc. 2.Workaround:

    1) Check if the printer driver is corrupted and if it is, reinstall the driver. (2) Check whether the printer hardware is faulty, if there is a fault, please replace the hardware; (3) Check whether the printer line contact is good, if it is bad, please re-wire; (4) Check whether the printer paper settings are correct, if not, please set it again. 3.Personal Texas Joke Tips:

    1) Regularly check the printer book containing the driver to ensure that it is operating normally; (2) Regularly check the printer hardware to ensure that it is operating properly. (3) Regularly check the printer line contact to ensure that it is in good condition; (4) Regularly check the printer paper settings to make sure they are correct.

Related questions
9 answers2024-04-10

The printer can be inked by following these steps:

1. Put paper towels or other hygroscopic materials on the countertop to absorb the spilled ink. >>>More

11 answers2024-04-10

How to set Lenovo LJ2655DN printer to Chinese? Click "Start" in the lower left corner of the computer, "Printers & Faxes" or "Devices and Printers", right-click on the icon of the printer you are using, select "Printing Preferences" - >Maintenance", click the drop-down menu in the language in the lower left corner of the window, and select "Chinese (Simplified)". >>>More

10 answers2024-04-10

The printer is connected to the computer, it depends on whether you are a network printer or a normal ordinary printer, the network printer must be connected to the LAN, and then the computer is driven by the first driver, and the network printer can be printed. If you want a normal printer, you need to connect the print data cable, and then install the computer printer driver to print.

6 answers2024-04-10

Either you didn't install it well, or you installed it not original, and the system can't recognize it. >>>More

7 answers2024-04-10

This kind of machine generally has three parts of jammed:

1. The place where the carton feeds paper (you can pull out the carton to see if there is paper below) (if you can't pull it out, don't pull it hard, you can do it through the jam paper 2). >>>More