Apple 5 failed to recover after flashing the device, and the device could not be found

After flashing the Apple 5, it failed to recover the solution to the device that cannot be found:

1.Run the computer menu, enter "regedit", click to open hkey-current-user,software,apple computer inc (the beginning is apple), open the iTunes folder and quick folder, all that can be deleted and click delete, if there is a prompt error, it means that it cannot be deleted, remember that iTunes and quicktime folders have to be deleted.

2.Log in to Microsoft's official website ** "Windows Installer Clean Up", open it after installation; Remove Apple Mobile Device Support, Apple Software Update, iTunes, iPod

software, select the software, and click "remove" to delete it.

3.Delete iTunes and QuickTime from the computer's control panel.

1. If the user's profile has not been jailbroken from the iPhone

Theoretically, the probability of a white apple on an unjailbroken device is very low, but if a non-jailbroken machine has a white apple, it can basically only be solved by reflashing the firmware.

a, in the state of white apple, plug in the data cable to connect to the computer, (at this time, keep iTunes in the boot state).

b. Press and hold the home button (that is the circle button) + the power button (that is, the power on and off button) at the same time.

c, until the device is blacked out (i.e., when the device is turned off). Release the power button and wait for about 7-10 seconds until the iPhone prompts for recovery.

D, at this time, iTunes on your computer will also have a prompt of "Waiting to restore iPhone".

e, after confirming, click Restore directly. At this time, basically the iPhone will help you restore the system by itself, and there will be prompts such as reboot in the middle, as long as you don't turn on the data cable, it will basically be successful.

Part 2: If the user's iPhone has been jailbroken:

Method 1: Repair the iPhone version of the 91 mobile phone assistant (you can enter the iPhone independent version of the old 91 mobile assistant in the official ** of the 91 mobile phone**). When the user's iPhone is out.

If the iPhone can be connected to the 91 assistant normally, try to click "System Maintenance" - "White Apple Repair Tool" to try to solve the problem.

Ordinary white apples can be repaired, and the repair process is completely automatic.

It is recommended to contact the official after-sales service to help solve the problem, or you should bring your mobile phone to the nearest official after-sales maintenance store for help.

The phone enters DFU mode first, the method is: connect the phone to the computer, press and hold the power button for 3 seconds, do not release, and press and hold the home button for 10 seconds at the same time, release the power button, continue to press the home button for 20 seconds (the screen will flash once), you can release the home button, and the computer will display the new hardware.

Then just restore the firmware with iTunes.

It seems to have been encountered before.,There was a problem with the system after the white apple.,It's difficult to restore the previous backup.,Later, it's an official pure firmware brush.。

Causes of mobile phone operation errors.

Causes and workarounds:

1. Misoperation of the phone, such as pressing and holding the home button of the iPhone and the power off button at the top for 10 seconds at the same time, and after the iPhone screen is darkened, release the top power off button and continue to press and hold the home button, knowing that the iTunes connection screen appears on the iPhone screen, it will enter the recovery mode.

Solution: Turn off the recovery mode or restart the phone.

Second, the Apple iphone6s jailbreak failed, resulting in the mobile phone operating system.

Corrupted, recovery mode appears.

Solution: Reinstall the system on your phone, or restore the system through iTunes.

The steps are as follows: 2. Open the iTunes software, and press the power off button + home button on the phone.

Enter recovery mode.

3. The iTunes software on your computer will prompt you to detect an iPhone device in recovery mode.

4. Click [Restore iPhone]. And in the prompt that pops up, click the [Restore and Update] button.

5. iTunes will detect the latest system firmware for your iPhone.

6. Until the iPhone system is repaired successfully.

3. Caused by damage to the operating system of the mobile phone.

Solution: Flash the phone directly, you can flash the phone yourself, if you can't flash the phone, you can go to the after-sales flash, repair the mobile phone operating system.

Apple 6 flashing appeared unable to restore the device-2 is caused by a flashing error, the solution is:

1. First of all, we connect the mobile phone to the computer with a data cable, and then open the iTunes software installed on the computer.

2. Then we will turn off the phone, and then press and hold the power on and off button and the home button at the same time. When you see the logo of the iTunes software, then the phone enters DUF mode.

3. When our phone enters DUF mode, then we display on the iTunes software page on the computer - iPhone in recovery mode is detected....Then we click --OK--that's it.

4. At this time, we will see that the iTunes software prompts us again - whether the phone needs to be restored or updated - and then we hold down the shift key.

Click the --Recover--button again, as shown in the image below, the prompts on this page may be different, but we just need to follow the steps above.

5. When we clicked the --Recover--button, then we opened the system folder on the computer, and then we found our previous good iOS firmware and opened it.

6. When we select the firmware to be installed, then iTunes prompts us whether we need to restore the phone to a certain system, and then we click --Confirm--.

7. Then the phone starts to flash, and we can wait quietly.

Second, the computer ** Apple's official flashing software: iTunes. Then connect the computer with a data cable, after identifying the phone, click Summary - Restore the phone settings, and the system will automatically help you brush it.

It is recommended to go to a regular store to flash the machine.

The phone enters DFU mode first, the method is: connect the phone to the computer, press and hold the power button for 3 seconds, do not release, and press and hold the home button for 10 seconds at the same time, release the power button, continue to press the home button for 20 seconds (the screen will flash once), you can release the home button, and the computer will display the new hardware.

Then just restore the firmware with iTunes.

It is not the reason for the data cable, it is recommended to use the original data cable.