How do I restore my Huawei phone to its original state after flashing?

It is estimated that it is caused by an unexpected failure of your mobile phone system;

Then you might as well fix it according to the prompts of the system and see if you can enter the system normally;

If the phone still can't enter the desktop of the phone normally, then you can only force your phone to restore to factory mode;

The specific method (taking Huawei mobile phones as an example, other brands of mobile phones operate similarly):

3. After entering the factory reset, the system will remind again, we use the volume key again to select the factory reset below, and then press the power button, and the phone will automatically restore the factory settings.

After the phone recovers the data, the phone should be able to enter the mobile phone login interface normally after restarting it again;

Hello, happy to be able to answer this question for you. 1.It is recommended to press and hold the power button of the mobile phone for 8-10 seconds to observe whether the machine can be turned on normally.

2.It is recommended to take out the battery, expansion card, SIM card, clean the battery contacts, then reinsert the battery into the phone, and tap the power button again to power on. 3.

If this is the case if some third-party software is installed, it is recommended to try to uninstall some third-party software by entering safe mode. 1) Turn off the phone first, when the phone is displayed again, when the phone is displayed, quickly press and hold the menu button until the word "safe mode" is displayed at the bottom left of the phone, and then release your hand. 2) After entering the safe mode, go to the Task Manager option and uninstall some third-party software installed.

3) After uninstalling, reboot the device and observe whether it still stays on the boot interface. Hope it helps.

It is possible that the parts are damaged, and it is recommended to go to an official repair service point for inspection and repair.

Don't do it yourself, it's likely to make things worse.

This kind of system recovery will occur on Huawei phones, so you can directly restore the system of Huawei phones to use.

Let's reply again If you don't know it, it's a tragedy if you set the password and don't remember it, and the next time I locked the box and forgot the password I opened all night Shen Lian likes Miaotong I like it too I want to die because she can't give up and is depressed.

1. Pull down the desktop, call up the desktop search, search for the corresponding application to view and locate, if it can be searched, click [Restore], if it cannot be searched, the application is uninstalled, and it needs to be reinstalled in the application market.

2. Check whether a third-party desktop is used, and it is recommended to use the Huawei default desktop to restore it.

At present, Huawei's latest EMUI10 system has banned the use of third-party desktops) 3. If the above two methods are not available, you can try to clear the desktop user data for restoration.

Note: This article uses the Huawei Mate30 Pro as an example, which is applicable to EMUI 10 systems.

For Huawei phones, click the following steps:

Method. Start by clicking on Settings.

Please click Enter a description.

Then tap Advanced settings.

Please click Enter a description.

Then select Backup & Reset.

Please click Enter a description.

Then tap on Factory Reset.

Please click Enter a description.

Then tap Reset Phone.

Please click Enter a description.

Then enter the lock screen password.

Please click Enter a description.

Finally, resetting your phone is done.

Please click Enter a description.

Hello, if you want to restore your Huawei phone to a comfortable state, it is recommended to restore the factory settings, and the operation steps are as follows:

1. Open the settings and enter the following interface:

2. Click Advanced Settings to enter the following interface:

3. Click Backup & Restore to enter the following interface:

4. Click Restore factory settings, the following interface will appear, and continue to complete the factory reset according to the prompts.

First, we open our Huawei mobile and tap on Settings; 02 Once we are in the settings, we click on Apps and Notifications; 03 Then we click on Application Management; 04 After that, we click on Huawei Desktop; 05 After that, we click on Storage; 06 pops up the interface, we click to delete data and empty cache, so that the mobile phone desktop icon can be restored to its original state.

If you want to restore the original state of the Huawei mobile phone and leave the factory, you can double clear or enter the settings to restore the factory, but you must remember the password, otherwise you will not be able to activate it.

It's very easy to restore the original state, just factory reset the phone, and you can find the option in the phone's settings.

Go to your phone's settings, find the factory reset and you're good to go.