The computer is turned off, and the host computer is still lit up, is the computer broken?

The computer is turned off, but the light on the console is still on, which could be one of several reasons:

1. Whether there is a problem with the power supply cable, please check the power connection;

2. The voltage in the area is unstable, which can be tested with a multimeter, if the mains power is far lower than 220V when the power is off, please try to use UPS;

3. If the power supply of the computer is insufficient, please touch the power supply of the computer case with your hands when the power is off, whether it is very hot, if so, replace the power supply part of the case;

4. CPU overheating protection, whether it is playing games every time the power is off, it can be operated by animation, if so, please replace the CPU fan;

5. Static electricity interference, whether there is a feeling of electric shock when touching the metal part of the chassis shell with your hands, and showing electricity when measuring with a pen, if so, please ground the chassis.

It may be that the power button is not set to sleep mode.

1. First of all, we click the Microsoft button in the lower left corner of the computer desktop;

2. We click Settings;

3. We click on the system;

4. We click on Power and Sleep;

5. Click on other power settings;

6. Click to select the function of the power button;

7. In the pop-up interface, we click to change the settings that are currently unavailable;

8. Then we will enable fast startup to check it, and then we will click Save Modification, so that this problem can be solved.

This article is based on the Dell Inspiron 5000 brand and Windows 10 system.

Summary. Hello, I am helping you to inquire about the relevant case and will reply to you immediately.

Hello, I am helping you to inquire about the relevant case and will reply to you immediately.

Hello, according to investigation, the solution to the host light is still on after the computer is turned off is as follows: 1. Take a look at the BIOS settings for the self-starting option for incoming calls; 2. Make sure that the power start button and reset button of the chassis are in good contact; 3. Replace a plug-in board with a switch, do not pull out the plug, and disconnect the socket switch after the computer is shut down every time.

My host computer took to the computer city to repair it and came back to connect the monitor after the monitor could not be lit up in the computer city can be lit.

The graphics card is a 1070dp interface, the monitor is a Titan Legion 2k144, and it is also a dp interface, and the monitor can't be turned on, do you know how to solve it.

Hello, according to investigation, it may be that you turned off the display. You can open it up and try it. If you can't do it, you have to find a professional to inspect and repair it.

The computer response speed is slow to close some running programs or end some processes, it is strongly recommended not to press and hold the shutdown key, the computer itself has not been processed, it is easy to lose system files, causing the system to collapse, you can go to the toilet, wait a while, let the computer shut down by itself, otherwise the computer will be more and more faulty!

You can change the power mode as a result. I encountered this situation once, the reason is that the CMOS battery is out of power, I also checked and repaired it for a long time, what motherboard jumper, power button, and the entire motherboard have been checked, and then the CMOS battery was actually good, I also fainted for the first time to see the motherboard battery is out of power will be like this.

It should be that the system has a process that is not closed thoroughly, and you see if the graphics card driver is dragging the system. Turn it off, don't turn off the monitor to see how it is displayed.

Hello, this is normal for some motherboards, it is normal for the light to be on inside the shutdown, it is recommended that you buy an outlet with a switch, because even if you turn off the computer, the screen still consumes power.

The light is only on the computer, which can be turned on at any time. Of course, at the moment, the power consumption of the computer host is very low or very low, but the monitor is still a lot better.

I've installed it before, and I've had this situation, but I don't remember what the motherboard is, and the front light is still on when I turn it off.

It may be that there is a problem with the shutdown system and the shutdown is not completed.

You'll also need to press a button on the console.

If the lights on the main unit are going to be repaired.

That's the blue screen. If restarting is useless, you need to reinstall the system, and if it is useless to reinstall the system, you have to replace the memory module or hard disk.

The desktop has a small built-in battery, and that battery provides power to the light after shutting down!

I'm afraid that your power light line is connected to the wrong one, and it will light up when the power is connected.

The green color of the main chassis is the power indicator.

The red one indicates that there is a hard drive.

Win7 presses the shutdown button to standby by default, and win xp presses to shut down. Are you on standby?

The advanced power option just changes the power off when pressed to power off.

Long press to shut down is a forced shutdown, and the hard disk will be detected when it is turned on.