How to install software on the network set top box

The method of setting up a wireless network in the Dianuite network set-top box is as follows:

1) Press the "Menu" button of the remote control of the set-top box and find the "Settings" option;

2) Find [WLAN] in the settings menu and tap to enter.

3) Click the [Turn off] button in the upper right corner of the [Wi-Fi settings] page, and click to turn on [Wi-Fi].

4) Click to open, a lot of wireless network names will appear on the [WLAN Settings] setting page, find your wireless network and click to enter;

5) Enter the password of the wireless router, the general wireless password is 8 digits, if you don't know, according to the ** provided behind the wireless router, log in to set up, you can open the wireless network, so that the set-top box is connected to the wireless network.

Just enter the wifi password according to the prompts.

Diyuite network set-top box flashing method and steps:

3. Insert the SD card into the card reader.

4. Run the flashing program, select the written USB flash drive as the SD card, and select the flashing package.

5. Click to start writing the card blindly, or write the flashing package.

6. After the flashing is completed, remove the SD card. Turn off the power of the set-top box. Insert the SD card Suizhou interface of the set-top box.

7. Turn on the power of the set-top box and start flashing automatically. The signal indicators will flash together, the signal light will not flash, and the flashing will be completed. The set-top box will automatically restart.

The main reasons and solutions for the set-top box of Diyuite Yang Kun not to connect to the Internet:

1. If the network settings of the set-top box are incorrect, resulting in the network cannot be connected, you can reset the set-top box to connect to a wired or wireless network;

2. If there is a problem with the setting of the router or the set-top box cannot be connected to the network due to router failure, you can restart the router to solve it, if necessary, you can reset the router, and then reset the network parameters to solve it.

3. If the external network is not connected to the set-top box and the network cannot be connected, you can contact the local network service provider to repair the network and solve the problem, and the user can set up the set-top box networking attempt again in a different time period;

4. If the set-top box system problem causes it to be unable to connect to the network, you can restart the set-top box to solve it, and if necessary, you can reset the system or upgrade the system to solve it;

5. The set-top box hardware failure causes it to be unable to connect to the network, such as network module failure, related circuit failure, motherboard chip and other component failure, etc., which need to be repaired by contacting the after-sales service of the set-top box for maintenance.

The main reasons and solutions for the set-top box of Dinuite Yang Dou Shoukun not to connect to the Internet:

1. If the network settings of the set-top box are incorrect, resulting in the network cannot be connected, you can reset the set-top box to connect to a wired or wireless network;

2. If there is a problem with the setting of the router or the set-top box cannot be connected to the network due to the failure of the router, you can restart the router to solve it, reset the router if necessary, and then reset the network parameters to solve it.

3. If the external network is not connected to the set-top box and the network cannot be connected, you can contact the local network service provider to repair the network and solve the problem, and the user can set up the set-top box networking attempt again in a different time period;

4. If the set-top box system problem causes it to be unable to connect to the network, you can restart the set-top box to solve it, and if necessary, you can reset the system or upgrade the system to solve it;

5. The set-top box hardware failure leads to the failure of the sales chain to connect to the network, such as network module failure, related circuit failure, motherboard chip and other component failure, etc., which need to be repaired by contacting the after-sales service of the set-top box for maintenance.