How do you make your own facial soap? How to make homemade soap?

Honey soap. Prepare the materials.

100 grams of soap, 1 cc of rose essential oil and 1 carbon of tarpa, 1 stainless steel container, 1 wooden spoon, 1 mold, 1 water thermometer.

How to make it: 1. Cut the soap base into pieces and put it in a stainless steel container, and heat it over a low heat with a temperature of no more than 70 °C.

2. After the soap base is completely melted, add honey and pay attention to the temperature to be controlled at 60.

3. Pour into the mold, and exit the mold after it is completely solidified.

Efficacy. It has an exfoliating effect.

Eligibility. It is more suitable for people with medium to oily skin.

Precautions. 1. Don't add too much honey, otherwise the handmade soap will be softer after completion.

2. It is not easy for people who are prone to eczema to use it.

3. The finished honey soap must be used up within 1 year.

Calendula facial soap.

Prepare the materials. 100 grams of soap, calendula according to personal preference, lemon essential oil 1cc, stainless steel container, 1 wooden spoon

1 mold, 1 water thermometer.

How to make it: 1. Cut the soap base into pieces and put it in a stainless steel container, and heat it over a low heat with a temperature of no more than 70 °C.

2. After washing your hair, soak your hair in water for about 5 minutes.

3. Pour into the mold, and exit the mold after it is completely solidified.

Efficacy. It has an exfoliating effect.

Eligibility. People with normal skin.

Precautions. 1. The floral fragrance added to the soap base has the effect of exfoliating, but only calendula and helichrysum can not change color at the soap base and high temperature.

2. The finished calendula facial soap must be used up within 1 year.

3. Because the concentration of each essential oil is different. When you can buy enough, be sure to ask about the amount of essential oil added.

But it's better to buy, it's convenient and trouble-free! May you shine beautifully every day! Have fun!

According to the individual's skin type, choose certain skin care products, such as Chinese herbal medicine, as well as animal fibers

A pinch of aloe vera, a pinch of mineral salt, and mix well with mashed potatoes.

Methods of making homemade soap with lard and caustic soda:

Put 20 grams of lard, 7 grams of sodium hydroxide and 50 ml of water in a beaker and heat with an alcohol lamp. While heating, stir constantly to allow the lard and sodium hydroxide to fully react. Because the reaction is relatively slow, this period of reaction time is relatively long.

During the reaction, water should be added several times to make up for the water lost due to evaporation.

When you see that the surface of the reaction mixture is no longer floating with a layer of molten ** fat (i.e., lard that has no effect), it means that the lard and sodium hydroxide have basically reacted completely, and the heating can be stopped. Then add 50 ml of hot saturated table salt solution to the beaker while it is hot, stir it thoroughly, and then let it cool to precipitate the sodium stearate from the mixture.

Finally, the sodium stearate solid floating on the top layer of the solution is removed, and the solution adsorbed on the surface of the solid (which dissolves glycerin, table salt, and unfinished sodium hydroxide) is rinsed with water, and after drying and molding, it is made into a piece of soap.

There are three keys to doing this experiment well:

1.The reaction time between lard and sodium hydroxide must be sufficient, and the heating must not be stopped until the surface of the mixture is not visible to the floating oil. If the reaction is incomplete, the soap will contain excess oil wax and sodium hydroxide, so that the decontamination ability of the soap will be reduced, and it will be more alkaline.

2.During the reaction, don't forget to replenish water. The mixture should always be kept with about 50 ml of water.

3.After the reaction, the volume of the mixture should remain close to that before the reaction. After sodium stearate is precipitated, there is still a certain amount of water in the mixture, so that glycerin, sodium chloride and unfinished sodium hydroxide are left in the water, if there is too little water, these three substances will mix into the soap, affecting its quality.

Ingredients: 500 g of glycerosaponin, a handful of walnuts, 50 ml of argan oil, soap molds, a tablespoon of essential oils.

1. The first step is to crush the walnuts with a spoon, as shown in the figure below.

2. In the second step, the glycerol saponine is melted in water, as shown in the figure below.

3. Add argan oil to the melted glycerol saponine, as shown in the figure below.

4. Add the chopped walnuts to the pot, as shown in the picture below.

5. Add the essential oil to the soap and stir well, as shown in the figure below.

6. Pour the prepared soap into the mold, as shown in the figure below.

7. As shown in the figure below, the soap is ready.

There are 2 types, one without a blistering tool. Wet the soap, then lather back and forth with your hands to cleanse your face. Generally, unless the soap is particularly moist, it is not easy to foam.

It is recommended to use the second, second, with a blistering tool. Rub a wet sponge ball or foaming net (the bath ball is reduced by a section, fold it in half and tie it to use), rub it on the surface of the soap a few times, and then rub the sponge ball or foaming net with both hands, and it will have a rich lather. With this method, basically all soap and soap can foam richly, and the soap consumes slowly.

Cleanse your face with a lather, just remember to avoid the eye area.

Wet the facial soap, then make bubbles on your hands, and then rub the bubbles on your face as you usually use a facial cleanser.

Here's how to make the camellia oil herbal shampoo soap.

Formula: Oil: Camellia Oil 150g, Olive Oil 150g, Castor Oil 50g, Coconut Oil 150g;

Sodium hydroxide lye: 76g of sodium hydroxide, 190ml of purified water;

Additives: Litsea pepper essential oil 15ml, cinnamon essential oil 5ml, pine essential oil 5ml

Steps:1To make lye: In an open and ventilated place, mix sodium hydroxide with purified water, stir well and let it stand to reduce the temperature of the lye to 50.

2.Heat the oil: Camellia oil, olive oil, castor oil, coconut oil in a pan and heat to 50.

3.Stir for 10 minutes, when the temperature of the lye and the grease are 50, slowly pour the lye into the grease, stir continuously for about 10 minutes, and let stand for 5 minutes to observe whether the oil-water separation phenomenon occurs.

4.Beat for another 10 minutes, if there is oil-water separation, add soap for another 10 minutes, and stop stirring when the soap is thick and completely mixed.

5.If the temperature of the soap is lower than 40, you can heat it slightly over the water to warm up to 40 45, so that it can maintain enough temperature to continue saponification.

6.Add the additives, drop in the essential oil of litsea pepper, cinnamon and pine, stir evenly for about 3 minutes to enter the mold.

7.Heat preservation in the mold, stir the soap evenly and pour it into the mold, and then put it into the foam incubator to keep it warm for 24 hours, so that the soap can be continuously saponified, and it can also be wrapped in a blanket, which has the same effect.

8.Demoulding, heat preservation for 24 hours can be demolded, if the manual soap is wet and sticky is not good to demold, you can put it for 2 3 days and then demould.

9.Cut soap cold soap, air dry for 2 3 days after demolding, you can cut soap. Place the cut handmade soap in a cool and ventilated place for 30 to 45 days, and use it after the handmade soap is completely heated.

Bubble Blowing Solution Recipe Large Collection Optimal Formula for Blowing Bubble Solution: 2 parts detergent, 6 parts water and 1 part glycerol 4 parts glycerin.

The reason why the bubbles are colorful: When light passes through the film of the soap bubble, the top and bottom of the film are refracted, and the soap film can contain up to about 150 different layers. The messy color combinations we see are caused by unbalanced layers of film.

The last film layer reflects red light, the thinnest reflects violet light, and the center reflects colorful light.

Causes of bubble formation: Bubbles are formed due to the surface tension of water. This tension is the mutual traction force that exists inside the object and is perpendicular to the contact surface of two adjacent parts when it is subjected to a tensile force.

The mutual attraction between water molecules on the surface of the water is stronger than the attraction between water molecules and air. These water molecules are like being glued to a beggar. However, if the water molecules are overly bonded to each other, bubbles will not be easy to form.

The soap "breaks" the surface tension of the water, reducing it to only 1 3 under normal conditions, which is the optimal tension required to blow bubbles.

The method of slowing down the disappearance of bubbles: the evaporation of water is very fast, when the water evaporates, the surface of the bubbles is broken, and the bubbles disappear, therefore, some substances must be added to the bubble solution to prevent the evaporation of water, and this kind of substance with water-collecting properties is called hygroscopic. Glycerin is a hygroscopic liquid that forms a weak chemical bond with water, which slows down the evaporation of water.

The use of soapy water will affect the effect of blowing bubbles. Generally, soapy water made with 2 parts of dishwashing concentrate and 6 parts of water can be used. To make the bubbles last, change the recipe to 2 parts dishwashing detergent plus 6 parts water and 1 to 4 parts glycerin.

I poured a little glycerin into the water, then poured some laundry detergent, and stirred quickly... Add a little salt or glycerin to the dish soap (washing powder) and add a little salt or glycerin to make bubble water.

Foam bath dew + water + honey.

You can give it a try.

Method 1: glue + washing + water, the ratio is 1:2:3

Method 2: Soap, hot water, colored ink (to increase color).

Mix together one part liquid soap, 1 part glycerin, and 6 parts water to make your own bubble water.

In daily life, there are many materials that can be used to make water for blowing bubbles, such as chopping soap and dissolving it in water, or adding water with dishwashing detergent or shampoo. Experiments have proved that adding three solutions of soapy water, dishwashing detergent and shampoo with a relatively high concentration can make the bubbles blown out more durable and not easy to break.

Another way is to add a small spoon of granulated sugar or a little tea leaves to the soapy water, and leave it in a dark place overnight, and you will find that the bubbles blown by this soapy water are not only bright in color, but also less likely to burst.

What is it used for?

Bubbles of soapy water: 2 parts detergent, 6 parts water and 1 part glycerin 4 parts.