Is the hook mechanical controller the original on the board?

What you said is completely correct, it is indeed his original, and this original must be configured, otherwise there is no way to use it.

Of course, this is the original, and the electronic controller is of course the original of the electric board.

I think you don't need to ask questions online, there are many such stores on the interface, you can directly ask, what is the reason to see if they can help you solve it.

The hook electric controller is generally not a component on the board, this is a circuit element that is removed separately as a separate practical thing.

The hook electric controller is a component on the electric board, and it is very convenient to use, there are very good and practical, it is worth buying, this is a must.

This is the original, and generally the original is coded, so you can check it.

He's the one element on the board, and then it's all in this position normally, and if you don't need it, you can move it somewhere else.

Like that sentence, the electric controller is a piece of software on the board, yes, yes, it's different, can you get it out, can you find it?

The advanced electronic control should be the original price on the board, and in this way, it should be able to better use some effects, so it should be able to better communicate with others, so it should still be needed.

For this kind of electronic control, it is not the original on the motherboard, but a separate controller. This will help him to repair and replace.

Is the Advanced Monitor an original on the keyboard? I don't understand, I don't know.

The hook electric controller is the original on the electric board, there is no doubt about this, because the electronic controller is of good quality, so it is the original on the electric board.

There are many types of circuit boards and electrical components, and any component may fail to rotate. If it is a relay control circuit, first find out the working principle, and then analyze the fault. If it is an electronic control circuit, it is recommended that you replace it with a new circuit board.

I also have a Seagate 500g 12 belt disk here Sometimes it's normal, sometimes I can't find the hard disk, when I can't find the hard disk, the mhdd can't find it, everything is normal when I find it, and the mhdd can also be found! Is this a glitch? It's not a motherboard and cable problem, I've already replaced it!

After removing the plate, it was found that the contacts did not oxidize!!

First, check whether the power output is normal and whether there is too much fluctuation. Then detect the cause of the data cable connection and motherboard parts. The simplest is to replace the hard drive that you think is faulty by replacing it with another computer to detect whether it is a hard drive failure.

Controller + battery + motor equipping relationship.

1: 48V battery + 48V20A controller + 500W motor.

2: 60V battery + 60V22A controller + 800W motor.

3: 72V battery + 72V28A controller + 800W or 1000W motor.

1. The power of the electric vehicle comes from the motor, the greater the power of the motor, the greater its load capacity, and it can be loaded with heavier items.

2. The controller of the electric vehicle controls the speed of the motor (that is, the driving speed of the electric tricycle), and the controller of the electric tricycle needs to be matched with the motor.

3. The battery of the electric tricycle provides energy for the motor of the electric tricycle. The unit of the battery is ampere-hours (AH), and the larger the capacity, the longer the driving time (battery life).

4. When purchasing, we should pay attention to two points: the load capacity of the electric tricycle, that is, the maximum amount of goods that can be loaded; , battery life, is how long the electric tricycle can be operated when fully charged. Based on the "speed" of the manual, you can calculate how far you can travel.

I repaired one of these zipper machines a few years ago, which is neither single-chip control nor PLC control, and the one I repaired is an ordinary logic control, which is controlled by some door circuits composed of digital integrated circuits.

SP GND 5V consists of a three-wire D+D- should be the power line, ABC is the phase wire, UVW GND 5V, should be Hall five wires, I don't know the others.

These numbers, defined by the designer himself, are easy to remember and analyze, and are generally abbreviated for a certain function or role.

D+ and D- may be the two poles of the motor winding, or they may be the positive and negative poles of the external diode.

a、b、c；W, U, and V are usually abbreviations for the sedan voltage or motor terminals, but they are not necessarily, and may be other serial numbers.

In short: it is not possible to generalize, and the real meaning must be combined with the overall system design.

dData

DSP Digital Signal Processing

D+, D- is the input positive and negative voltage, ABC is the input three-phase voltage, and UVW is the output three-phase voltage.

60 volts directly add 72 volts, this voltage is more than the standard. It cannot be used, because there is a high chance that it will cause parts such as motors or controllers to burn out, and there is a high risk.

The electric car turned out to be 60v, and with the addition of a battery, it became 72v, and it can be used without any problem.