Whatever liquid can be electrified, what liquid can be electrolyzed

The solution of acid and alkali salts, in fact, you can just take ordinary water, the water in life is not pure water, of course you can add some salt.

And it seems like your liquid unlocking is not a good way to do it.

It's better to consult a professional locksmith.

Aqueous solutions of acids, alkalis, and salts.

Liquid metal (mercury, although the surface tension is too great to be considered).

Ionic liquids (not very easy to do.)

…Are you sure this will work?

Salt water conducts electricity.

Safety first, the landlord is cautious.

There are electrolytes, such as sodium chloride solutions, or metals themselves, such as mercury.

Electrolyte solutions conduct electricity, such as saline.

Aqueous solution of basic copper carbonate.

The electrolyte solution conducts electricity.

Not electrolyzed water, but decomposed water! It is harmful to the human body, and drinking this water often will significantly slow down the cell metabolism and affect the physical development of minors.

Aged water: commonly known as'Backwater', that is, water that has been stored for a long time. Drinking this kind of water often will significantly slow down cell metabolism and affect physical development for minors; Middle-aged and elderly people will accelerate aging; The incidence of esophageal cancer and gastric cancer is increasing in many places, which may be related to long-term drinking of aging water.

The toxic substances in aged water also increase with the storage time of the water.

Thousand boiling water: Thousand boiling water is water that has been boiling on the stove overnight or for a long time, and water that has been boiled repeatedly in an electric water heater. This kind of water is boiled for too long, and the water has a high content of non-volatile substances, such as calcium, magnesium and other heavy metal components and nitrite.

Drinking this water for a long time will interfere with people's gastrointestinal function, causing temporary diarrhea and bloating; Toxic nitrite can also cause hypoxia in the body, and in severe cases, coma, convulsions, and even death.

Steamer water: Steamer water is leftover pot water such as steamed steamed buns, and the nitrite concentration of steamer water used repeatedly is very high. Drinking this water, or boiling porridge with this water, can cause nitrite poisoning; Scale often enters the human body with water, and can also cause diseases of the digestive, nervous, urinary and hematopoietic systems, and even cause premature aging.

Unboiled water: The tap water that people drink is treated by chlorination and sterilization. 13 kinds of harmful substances can be separated from chlorine-treated water, among which halogenated hydrocarbons and chloroform also have carcinogenic and teratogenic effects.

When the water temperature reaches 90, the halogenated hydrocarbon content rises from 53 micrograms per kilogram to 177 micrograms, which is more than twice the national drinking water sanitation standard. Experts point out that drinking unboiled water increases the likelihood of bladder cancer and rectal cancer21 -38 . When the water temperature reaches 100, these two harmful substances will be greatly reduced with the evaporation of the vapor, if you continue to boil for 3 minutes, it is safe to drink.

Re-boiling water: Some people are accustomed to re-boiling the remaining warm boiled water in the thermos before drinking, in order to save water, coal (gas) and time. But this kind'Save'Not enough to take.

Because the water is boiled and burned, the water evaporates again, and the nitrite will rise, and if you drink this water often, nitrite will accumulate in the body.

Definition of electrolysis in the warm state, cooling and pressurization, liquefaction electrolysis, electrolysis, electrolyte, liquid electrolyte, or liquid electrolyte, and molten electrolyte.

For wet liquid charging batteries, the electrolyte should be added between the upper and lower lines.

The electrolyte is a mixture of sulfuric acid + distilled water, with a certain specific gravity ratio according to the temperature level.

The sulfuric acid component in the electrolyte is strong and corrosive. Adding too much liquid will corrode the plates, causing premature aging of the battery.

At the same time, due to the excessive electrolyte, a large amount of gas is generated during the charging and discharging process, and the overflow of the gas carrying electrolyte will corrode the battery binding post and cause poor contact.

When many gases are liquid, the volume changes rapidly after being energized to form gases, which are several.

In fact, as long as it is an oxide, it can generate gas (oxygen) after being electrified.

Water is fine, and when water is electrified, it becomes hydrogen and oxygen.

water, sodium chloride solution, and much more.

Hydrogen peroxide, liquid sulphur trioxide, which can be obtained from 0 to 100 degrees Celsius. At high temperatures, many molten metal oxides will do.

General liquids contain some ionic impurities, and these ions can conduct electricity, which is equivalent to conductors, of course, the conductivity is far inferior to wires, so it can also emit light.

If you want to conduct electricity better, use a liquid with more ions, such as a high-concentration sodium chloride liquid, that is, a table salt solution.

Ordinary bulbs can be added with a protective cover... This kind of protective cover is very easy to buy...

The chemicals in glowsticks are mainly composed of three substances: peroxides, esters, and fluorescent dyes. To put it simply, the principle of glow stick luminescence is that peroxides and esters react, and the energy after the reaction is transferred to the fluorescent dye, which then fluoresces.

A glass tube interlayer is usually placed in the glow stick on the market, and the inside and outside of the interlayer are isolated from peroxides and ester compounds, and after rubbing, the two compounds react to make the fluorescent dye glow.

Since the liquid chemicals in the glow sticks are packaged in polyethylene (plastic), they do not cause much harm to the human body. Because the light emitted by the glow stick is the non-radioactive light emitted by the chemical reaction to excite the dye, not the light emitted by the radiation excitation dye, it will not harm the human body. However, Zhao Fuqun also objected to the current practice of some people to catch up with the fashion, break the light stick, and smear the liquid inside on the body, because the direct contact of the chemicals in the light stick will cause certain damage to the human body.

Special care should be taken not to allow children to accidentally ingest it.

The reason why there is a view that fluorescent substances can harm the human body is because radioactive substances are used in some luminous watches and mine emergency lights, which make the dye glow in the dark, so people mistakenly believe that radioactive substances are also used in glow sticks, forming an error in understanding. The way for consumers to identify whether a luminous product is radioluminous is that the radioluminescence lasts for a longer time and the light intensity is weaker; Non-radiated light lasts for a shorter period of time.

Tin wire, there is a solder batch heating can be ignited!

As long as this metal can be electrolyzed into a molten state.