N defects of Siemens front loading washing machines

1.Different washing modes, the weight of the clothes that can be washed is not the same, you can look at the manual;

2.Can't wash two sets of underwear? It is best to ask Siemens maintenance personnel to come to the door to see if there is a machine failure;

3.Not automatically powering off is a design loophole that can't be helped.

4.We have also encountered cases where the washing machine does not work without dehydration, usually because the inlet faucet is turned off. Because the drum washing machine is an upper drain, it needs to be fed water to press the water out through pressure;

5.Washing clothes in a drum washing machine is time-consuming, and this is determined by the washing method of the machine itself, which is not saved. But it seems that the advantage of a drum washing machine is that it does not hurt the clothes, so how can the clothes be washed?

Siemens has a function that automatically monitors the foam to determine whether it is washed and whether it needs to be washed for a long time. It is speculated that the landlord has the habit of putting more laundry detergent (detergent), so that the machine detects that there is foam, and will continue to wash, "washing to death". In fact, as long as the clothes are not particularly dirty, you can add the dosage according to the instructions on the laundry detergent.

If there is a particularly dirty area, just drop some detergent (the kind used to wash dishes) before putting the dry clothes in the washing machine, and dry rub them;

6.Why can't a "single rinse" be washed a third time? This model is different from my family, so I dare not talk nonsense. However, the "single rinse" can change the "spinning speed", the highest is 800, the lowest is 600, and the clothes will not be damaged if you manually set it according to the clothes.

In addition, if you feel that you really can't run in with this washing machine, you can sell it to save you from worry.

I also bought a Siemens roller not long ago, and now it is also very annoying, it takes more than 4 hours to wash clothes once, otherwise: it is neither clean nor clean. Alas, what an annoyance! Think about it, it's still the same washing machine as before!!

Drum washing machines are a bit of a hassle. The features have to be looked at more.

If the merchant or mall can return or exchange, I would recommend buying a washing machine. Simple. Convenient.

My family is also with the landlord to buy a model, but it is 4599 to buy (bought on New Year's Day), because I just bought and have not found anything else bad, the only thing is that the sound is very loud when dehydration, and the sound is made until the dehydration stops, I don't know if the landlord's washing machine has this noise.

It's too extravagant, I'm going to buy one for a few hundred dollars. And I don't know much about washing machines, can the landlord give me some pointers?

Siemens front-loading washing machine failures** common are:1. F1: Siemens washing machine water level sensor is in poor contact.

2. E1: Check whether the drain pipe is blocked when the drainage of the Siemens washing machine is overtimed.

3. E2: The upper cover of the Siemens washing machine is not properly covered.

4. E3: The dehydration of the Siemens washing machine is unbalanced, and the clothes are shaken apart again and then dehydrated.

5. E4: Siemens washing machine water inlet timeout, check the water pressure, whether the water inlet valve is dirty and blocked.

6. E5: The water temperature of Siemens washing machine exceeds 50 degrees.

7. E6: Whether the Siemens washing machine uses high-foam laundry detergent.

Maintain common sense1. The washing machine should be read carefully before use. When in use, the washing machine should be placed on a flat and solid ground, and the distance from the wall and other items must be kept at least 5 cm.

2. The washing should be classified and washed in batches according to the material, color and degree of dirt.

3. Before laundry, remove the debris in the pocket to prevent hard objects such as nails, coins, and cards from entering the laundry bucket; Clothes with sediment should be removed from the sediment before putting them in the laundry bucket; Wool should be washed in a yarn bag.

You should ask the seller.

Ask: Will the seller know if this is not a repair?

It's been almost 10 years, who I asked, I must have to find a maintenance to answer the analysis of the reasons why the Siemens drum washing machine will stop working for a while, it suddenly stops working during the working process, and the failure is usually caused by the fuse blowing, which can be divided into two situations:

The first circuit is normal, and the possible reasons for the failure are: 1. The power supply voltage is too low. When the supply voltage falls below the minimum limit value, the current of the motor and solenoid will increase if the load remains constant, thus blowing the fuse.

2. The power supply voltage is too high. If the supply voltage is too high, the air-gap magnetic flux of the motor will increase and the current will increase rapidly, which will burn out the windings or fuses of the motor. 3. The load parts are overloaded.

In the abnormal use of the washing machine, if the wave wheel or spin bucket is stuck, the transmission mechanism will have shaft lock failure, bearing damage, etc. The motor will be overloaded or locked for a long time, and the solenoid cannot be fully attracted due to a fault, which will rapidly increase the current, which will burn out the motor windings or fuses. The specific cause of the overload of the load component should be found out in order to eliminate the overload.

Second, the circuit has a short-circuit fault. 1. During the water ingress process, the fuse is blown out. Unplug the lead of the intake valve and measure the resistance of the intake valve with a multimeter.

If the resistance is close to zero, the coil of the inlet valve will be short-circuited. If the resistance is normal, the water inlet circuit may be short-circuited. 2. The fuse is blown during cleaning or flushing.

Use the resistance position of the multimeter to measure the resistance between the pins and the neutral of the two windings of the motor. If the resistance tends to zero, the motor has a short-circuit fault. Measure the resistance between the two ends of a capacitor.

If the resistance is very small, the capacitor may have been damaged and short-circuited. If the motor or capacitor is normal, there may be a short-circuit fault in the cleaning or flushing circuit.

If it has been used for ten years, the parts are basically aging, and it is recommended to replace it with a new one, which will be more convenient to use. If you want to repair it, it will be very troublesome, after all, the parts of the old model are difficult to find and very expensive, and the money for repair can almost buy a good new washing machine. The current washing machine is generally not high, and you can basically buy a very good washing machine for 800 yuan.

The normal operation of the washing machine is that when it is drying, it stops when it is drying.

E17 fault**: No water enters when the start button is pressed when the machine is turned on. Cause of failure: the inlet valve is burned, the inlet power supply is not energized, and the inlet valve coil is short-circuited.

F01 display**: Analysis for the door is not closed. Cause of failure: repeatedly open and close the door, the fault is still the same, open the washing machine shell, unplug the upper and lower wires of the washing machine door switch, short connect together, start the washing machine, the fault ** disappears, indicating that the door switch is faulty.

A01 Fault**: When the door is not closed, the water level in the drum is higher than the water level of the safe door opening (water may overflow from the door) or the temperature in the flow drum is too high, if in the suspended state, the A01 fault** will be displayed alternately with Open: Please close the door.

A02 fault** The door is locked due to the water level and temperature in the drum and cannot be opened; If in a suspended state; A02 Fault** will be displayed alternately with PAUS. If you need to open the door and wait for the temperature to drop or drain water, e.g. select the "Single Dewatering" program.

A:03**Due to the overheating of the door lock, it cannot be unlocked by self-locking, please wait for a while and try again; Or turn off the power of the machine, wait 5 seconds and then turn it back on. Flashing: The faucet is not turned on or the water is stopped.

E18 fault**: The washing machine does not work when it is turned on Fault cause: The internal drain pump is faulty, a small amount of foreign matter blocks the drain pump, replace or clean the drain pump.

F34 Fault**: Washing all the time, not draining, not going down. Cause of failure: damage to the drain pump, blockage of the drain pipe, and lack of power to drain the power supply.

E16 Fault**:: No response after booting, display after 2 minutes. Cause of failure: The heating resistor in the door lock is burned, the power supply of the door lock is not energized, and it is not turned off.

E63 fault**: There is no response when the device is turned on, and a certain logo on the display screen is jumping. Cause of failure: The program is locked, and the CPU of the computer board is burned.

E67 fault**: The door cannot be opened, and there is no response when the washing machine door is closed. Cause of failure: Chaotic program, burned door lock. Full display symbol Fault phenomenon: display when there is no time display when the power is turned on. Cause of failure: The computer board is burned.

E04 Fault**: After washing, there is water in the bucket and does not dry out. Cause of failure: the drain pump is not faulty, the drain pump power supply is not energized, and the drain coil is burned.

Siemens front-loading washing machine failure**: L1 Siemens front-loading washing machine manually selects the amount of laundry**. la Siemens front-loading washing machine manual quantity selection**.

asafe on Siemens front-loading washing machines activate the keypad lock function. SFE OFF cancels the keypad lock function for Siemens front-loading washing machines. end indicates the end of the Siemens front-loading washing machine program.

E1 Siemens front-loading washing machine door lock is abnormal, re-close the door and check the door. e2 Siemens front-loading washing machine drain failure, clean the filter and check the drain pump. The water inlet of the E2 Siemens front-loading washing machine is overtimed, the water valve is not open or the water pressure is too low.

E3 Siemens front-loading washing machine temperature sensor is faulty. E3 Siemens drum washing machine drain timeout alarm, poor drainageCheck the drain pump or drain pipe. E4 Siemens drum washing machine heating fault, **check whether the heating pipe line is in poor contact or contact for maintenance.

E4 Siemens front-loading washing machine 8 minutes to reach the water level, the faucet is not opened, the water pressure is too low, siphoning. Press the start button to continue running. E5 Siemens front-loading washing machine has abnormal water supply (inlet), water pressure is too low, or water is stopped.

The e6 Siemens front-loading washing machine has an abnormal drying heating pipe. The e7 Siemens front-loading washing machine temperature sensor is exceptionally protected. E8 Siemens front-loading washing machine over-water level protection (inlet and drainage failure).

E9 Siemens front-loading washing machine drying temperature sensor malfunctioning. E10 Siemens front-loading washing machine water level sensor malfunction. The load cell of the E11 Siemens front-loading washing machine is faulty.

The drying water level of the E12 Siemens front-loading washing machine is abnormal. The door of the E13 Siemens front-loading washing machine is abnormal after starting, and the door is not closed properly after the washing machine is started. The e14 Siemens front-loading washing machine is unbalanced, so shake off the inner clothes.

NAL-E Siemens front-loading washing machine selects the drying program, after the drying program is too much in the drum, please take out the part of the inner clothes properly. The memory chip of the E2EE Siemens front-loading washing machine is faulty, contact for maintenance.

Question: Does the Siemens front-loading washing machine have an E35 fault?

The answer of E35 from Siemens is: the door lock cannot be lifted. It may be that the door lock is broken, or the computer board is broken, it is recommended to call after-sales **.

The question is now that after washing a few pieces of clothes, I can't turn on the machine after washing it again, and I changed the display board, and the motherboard didn't solve the problem.

After-sales **.

Didn't deal with it for you, asked them to deal with it for you for free.

Okay to ask! Thank you!

Hello, I am happy to serve you and give you the following answer: the failure rate of Siemens drum washing machines is not high, stupid but still possible to break down. The steps to resolve the fault are as follows:

1.Check whether the power supply of the washing machine is normal, if not, please check whether the electric combustion light source cable is damaged, or replace the power plug. 2.

Check whether the control panel of the washing machine is with a section bridge, if not, check whether the circuit of the control panel is damaged, or replace the control panel. 3.Check whether the drum of the washing machine is normal, if not, check whether the motor of the drum is damaged, or replace the drum.

4.Check that the water pipe of the washing machine is normal, if not, check that the water pipe is not damaged, or replace the water pipe. 5.

Check that the drain of the washing machine is normal, if not, check that the drain is damaged, or replace the drain. Personal tip: When using a washing machine, you should regularly check the power supply, control panel, drum, water pipes and drain of the washing machine to ensure that the washing machine is functioning properly.

Summary. Common faults of Siemens drum washing machines 1. The washing machine does not drain water. (1) There may be debris in the drain valve that is blocked and causes non-drainage, at this time, unscrew the valve cover of the drain valve first and take out the debris; (2) Check whether the adjusting rod nut on the drain valve is loose, resulting in the retractor being unable to pull the drain valve core apart and causing non-drainage, fix the nut at this time so that it can open the drain valve core; (3) It may also be that the computer board has been damaged and the computer board should be replaced; (4) If the nut is not loose or the cable is not loosened, the retractor may be damaged and the drain valve core cannot be opened, and the retractor should be replaced at this time;

2. In the state of no water, the wave wheel runs normally in the forward and reverse directions. The contact of the water level switch is always on, such as the contact is rusty, the elastic pressure of the contact fails, so that the contact can not be disconnected, resulting in the normal operation of the wave wheel in the state of no water.

3. The washing machine does not stop flooding. (1) The problem may lie in the water level switch, after a long period of use, the water level switch can stop the water ingress, causing the water ingress, at this time the water level switch should be replaced; (2) If everything is invalid, try to replace the computer board, because all actions are controlled by the computer board;

Siemens front-loading washing machine malfunction.

Common faults of Siemens drum washing machines 1. The washing machine does not drain water. (1) There may be debris blocked in the drain shed, causing non-drainage, at this time, unscrew the valve cover of the drain valve and take out the debris; (2) Check whether the adjusting rod nut on the drain valve is loose, resulting in the retractor being unable to pull the drain valve core apart and causing non-drainage, fix the nut at this time so that it can open the drain valve core; (3) It may also be that the computer board has been damaged and the computer board should be replaced; (4) If the nut is not loose or the cable is not loose, the retractor may be damaged and the drain valve core cannot be opened, and the retractor should be replaced at this time; 2. In the state of no water, the wave wheel runs normally in the forward and reverse directions. The contact of the water level switch is always on, such as the contact is rusty, the elastic pressure of the contact fails, so that the contact can not be disconnected, resulting in the normal operation of the wave wheel in the state of no water.

3. The washing machine does not stop flooding. (1) The problem may be auspicious in the water level switch, after a long period of use, the water level switch can stop the water ingress, causing the water ingress, at this time the water level switch should be replaced; (2) If everything is invalid, try to replace the computer board, because all actions are controlled by the computer board;

3) It may also be that the computer board rented by the bureau has been damaged and the computer board should be replaced; (4) If the nut is not loose or the cable is not loosened, the retractor may be damaged and the drain valve core cannot be opened, and the retractor should be replaced at this time; 2. In the state of no water, the wave wheel runs normally in the forward and reverse directions. The contact of the water level switch is always on, such as the contact is rusty, the elastic pressure of the contact fails, so that the contact can not be disconnected, resulting in the normal operation of the wave wheel in the state of no water. 3. The washing machine does not stop flooding.

1) The problem of Tongxiao may be in the water level switch, after a long period of use, the water type alarm switch can stop the water ingress, causing the water inlet not only, at this time the water level switch should be replaced;