-
That is definitely 50 watts more power-intensive, and you also need a transformer.
-
When both lights are working properly, the 220v7-bit bulb is more power-efficient.
When they are all working normally, the power consumption of the small power in the same time is less, and it is more power-saving.
-
The power of 12V is slightly larger, because the power coefficient of the left and right is added to the 12V transformer. More electricity-intensive.
-
The power determines that 7 watts of power is small and saves power.
-
Theoretically, 12 volt watt lamps are more energy-efficient because 12 volts and five watts of power are small, but if 12 volts need to be transformed, transformers are not small, and they are not small, and there are also two and seven watt lamps, which are about the same.
-
12v50 watt lamp and 2020 watt seven-watt lamp, if you save electricity, it must be the former, but although the former is more power-saving, it may not have such a good display effect.
-
It must be 500,000 more power-saving, because the power is low, and the low power is more saving.
-
In general, the lamp with less power is more energy-efficient. Therefore, it is theoretically a 220V seven-watt lamp, which is more power-efficient.
-
If you compare the two, it must be that the former is more energy-efficient, because the former consumes less energy in this regard, so it is okay in this regard.
-
There is no doubt about this, of course, a 220-volt seven-watt lamp is more power-efficient. The power we calculate is based on its wattage, and has nothing to do with its voltage.
-
In fact, if the 12-volt 50-watt lamp, the seven-watt one with the 220-volt one must be the same seven-watt one, and it is necessary to save electricity.
-
12v50 watt lamp and 220v7 watt lamp, that is naturally 7 watt lamp is more energy-efficient, lower power, and household electricity is easy to use.
-
These two lights are more power-efficient than the former, because the power consumed by the latter is relatively large, so it consumes electricity.
-
In terms of power, of course, the 7W lamp is more power-efficient, and the power reflects the energy consumption.
-
Of course, the 12-volt 50-watt lamp is more energy-efficient, and the multiplication of the two numbers is the power, and the latter is much larger than the former, of course, it is power-intensive.
-
12 micro 50 watts equal to 220v7 watts of lights I feel that 12v50 watts of lights are more energy-efficient.
-
If the materials are all the same, who has the lower power? Who is more power-efficient?
-
Which is more power-efficient, a 12-volt 50-watt lamp or a 220-volt seven-watt lamp? It's definitely a seven-watt lamp, which is more power-efficient.
-
The same wattage of 24Volt and 220V LED light which is more power-efficient?
Kiss, I've kept you waiting, I'm glad to answer for you, hello. First of all, we need to calculate the power of the two LED lights. According to this wax power formula p = iv, where p is the slip rate of gongsen, i is the current, and v is the voltage.
Let's say a 24-volt LED light has a current of I1 and a 220-volt LED light has a current of I2. Then the power of the two LED lights is P1 = 24 * I1, P2 = 220 * I2 respectively. By comparing the sizes of P1 and P2, we can come to the conclusion which LED light is more power-efficient.
If P1 is less than P2, then a 24-volt LED light is more power-efficient; If P1 is greater than P2, then the 220-volt LED light is more power-efficient. In addition, the degree of power saving of LED lights is also related to their light efficiency. Luminous efficiency refers to the amount of light output per watt and is usually measured in lumens.
If the light efficiency of the two LED lights is different, then the LED light with higher light efficiency will be more power-efficient even if the power is the same. To sum up, to determine which LED light is more power-efficient, we need to calculate the power of the two LED lights and compare their sizes. In addition, it is also necessary to consider the light efficiency of LED lights, and choosing LED lights with higher light efficiency can also achieve the effect of power saving.
-
The same wattage of 24Volt and 220V LED light which is more power-efficient?
The power of an LED light is measured in watts (W), while the voltage (volts, V) determines the magnitude of the current. In this case, if the two LED lights have the same power (both 24 watts), but one is 220 volts and the other is 24 volts, then they are actually consuming the same amount of electrical energy. Power (p) is equal to voltage (v) multiplied by current (i), i.e. p = v * i.
According to this formula, it can be obtained by blocking the calendar: for 220V LED light: 24W = 220V * i, the solution is i
For 24V LED light: 24W = 24V * i, solution i = 1a. Although the power of the two LED lights is the same, a 220V LED light requires much less current than a 24V LED light.
Therefore, at the same power, 220V LED lights are more power-efficient.
-
Of course, it's the same, the wattage is the same, the current used is different, but the electricity consumed is basically the same.
-
The power consumption is the same, both are 50W
-
1. The luminous efficiency of incandescent lamps with low voltage is higher, so 12V is more energy-efficient than 220V.
2. There is no 50W bulb, and the data of 40W is now used for reference:
Check the information: 12V40W bulb, the luminous flux is 550 lumens, 220V40W bulb, the luminous flux is 415 lumens, you can calculate the power saving rate:
Power saving rate = (550-415) 415 * 100 = power saving is very high, but this does not take into account the loss of 220 12V transformer.
Additional notes for friends downstairs are as follows:
The landlord's question is to compare the energy savings of the two light bulbs, and the meaning of "energy saving" here should be understood as emitting the same amount of luminous flux and using less electricity, or emitting more light with the same power consumption. The two are exactly equivalent!
For example, 4 220V bulbs in the living room and 3 12V bulbs of the same wattage have the same brightness! That's the energy-saving effect of low-voltage bulbs!
As for the total power consumption after adding the transformer, it should be discussed separately, which is no longer within the scope of the landlord's topic!
As far as the current LED lamps are concerned, they are generally 50-70 lm w, incandescent lamps are 10-15 lm w, and energy-saving lamps are 30-50 lm w, that is to say, 1w led lamps are equivalent to about 5w incandescent lamps and about 2w energy-saving lamps. >>>More
<>5kw low-speed electric vehicle range extender.
It is recommended to choose a range extender greater than or equal to 3kw will be more suitable, and the range extender voltage and the battery voltage can be consistent. >>>More
When 25 square copper wire is used with 380VAC, it can be about 38kw; A 25 square copper core cable can carry about 31kW when using 220VAC. >>>More
12V (Standard Range:
The voltage of 12V is to provide the logic judgment level for the serial port. >>>More
The scales of Jichai 12V190 single-cylinder valve adjustment are: >>>More