What is the reason why the air conditioner turns off and shows 26 5 degrees?

The temperature displayed after the air conditioner is turned off is the current indoor temperature, and generally after the next time the machine is turned on, the air conditioner will also work according to this temperature.

This display of the air conditioner is really the first time I saw it.,I only saw the integer before.,I didn't see it.,And the display of the decimal number.,This should be a fault.。

This problem is quite magical, because the data sent by the remote control of the air conditioner is not a command such as one degree higher and one degree lower, but every time the entire data is sent over, that is, how many degrees, mode, wind speed and other data, and each time it is sent, so that the display of the air conditioner and the display of the remote control can be synchronized. So if there is an inconsistency in the display, either your air conditioner is very, very special and is indeed sending an action command, or there is an error in the remote control code or air moderation code. You can try to turn on the remote control to the place where the air conditioner cannot be remotely controlled, turn it to 28, turn it off, and then turn it on to the air conditioner.

The air conditioner generally has no degree, and it is not a display board failure.

Because the temperature sensing accuracy of the temperature sensor of the air conditioner is 1, setting it to the adjustment accuracy level does not have much practical significance, but makes it complicated to adjust the temperature.

The temperature sensor on the household air conditioner does not have a high temperature sensing accuracy, and the temperature deviation is relatively large, and it is generally believed that its temperature sensing accuracy is about 1.

The air conditioner shutdown display, degree, it should be that there is a problem with your remote control, or that there is a problem with your air conditioner, and it may need to be repaired.

Hello, according to the situation you described, your air conditioner displays 26 degrees five when it is turned off, which means that when you use the air conditioner, the set amount is 26 degrees, and then the sleep state is moved and the timed state continues to display this temperature after the shutdown, thank you, I hope it can help you.

The air conditioner is turned off to show the degree, that must be the degree you set during the setting process, and then the air conditioner will shut down when it reaches this temperature.

The air conditioner shutdown display, degrees, the degree displayed is to indicate that the temperature in the room is the degree when the air conditioner is turned off. The temperature shown here is the temperature in the room.

The air conditioner shutdown display I think our air conditioner must not be able to set this kind of only an integer, is this your display a problem.

The air conditioner is turned off and displayed, what is the reason, this is not clear, you can ask the after-sales staff of the air conditioner.

I'm going to turn it off, and if it says 26°5, it's because it's 26°5 when you turn it off.

There shouldn't be any problem, you can turn that power off and then restart it.

This is a kind of display of the air conditioner, and there is no reason for it.

It may be because the shutdown button of your air conditioner is not particularly good, so the temperature will appear after the shutdown.

The air conditioner temperature showed 61 degrees because I got itFahrenheitHere's how to recover it

Equipment: Gree air conditioner.

1. The remote control is currently in Celsius, and the air conditioner is now on, as shown in the figure below

2. Turn off the air conditioner first, as shown in the figure below

3. The air conditioner is turned off, as shown in the figure below

4. Press the "Modular Macro Lie" and "-" keys at the same time, as shown in the following figure

5. At this time, it has been switched to Fahrenheit, as shown in the figure below

6. Press the "Mode" and "-" buttons again to switch back, as shown in the following figure

This must be the remote control accidentally adjusted to Fahrenheit display, the air conditioner remote control can be used to use Celsius and Fahrenheit two displays, generally the default is in Celsius.

Turn off the remote control, then press the mode and temperature down buttons at the same time to change it back to the Celsius display.

Introduction

An air conditioner is an air conditioner. It refers to the equipment that uses artificial means to regulate and control the temperature, humidity, flow rate and other parameters of the ambient air in the building or structure.

Generally, it includes cold source heat source equipment, cold and hot medium transmission and distribution system, terminal device and other major parts and other auxiliary equipment. It mainly includes refrigeration hosts, pumps, fans and piping systems. The terminal filial piety device is responsible for using the cold and heat from the transmission and distribution, specifically processing the air state, so that the air parameters of the target environment meet certain requirements.

If your Gree air conditioner keeps showing 26 degrees, it could be one of the following reasons:

1.Faulty temperature sensor: The temperature sensor of the air conditioner may be faulty, resulting in an inaccurate temperature display. You can try to replace the sensor or contact a professional technician for repair.

2.Ambient temperature is too high: If the indoor temperature exceeds the set temperature of the air conditioner, the air conditioner will not be able to cool down. You can try lowering the indoor temperature, or turning up the set temperature of the air conditioner.

3.Faulty aircon system: If the aircon system fails, it may result in inaccurate temperatures displayed. You can contact a professional technician for overhaul and repair.

In short, if your Gree air conditioner keeps showing 26 degrees, it is recommended that you first check whether the temperature sensor is normal, then check whether the indoor temperature is too high, disturb and finally check whether the air conditioning system is faulty. If the problem cannot be solved, it is recommended that you contact a professional technician for repair.

The Gree air conditioner keeps showing 26 degrees, and there may be several reasons:

First of all, the temperature sensor of the Gree air conditioner may be faulty. The temperature sensor is a key component in controlling the temperature of the air conditioner, and if it fails, it may cause the air conditioner to not read the indoor temperature correctly, thus displaying 26 degrees all the time. At this time, you can contact the Gree after-sales service center for repair or replacement of the sensor.

Secondly, the temperature setting of the air conditioner may be fixed at 26 degrees. Some models of Gree air conditioners may have timer and temperature control functions, and the operating time and temperature of the air conditioner can be set by the user. If the temperature is fixed at 26 degrees, the air conditioner will maintain this temperature at all times and display it as 26 degrees.

In this case, the user needs to check the control panel of the air conditioner to see if it is set. If you need to change the temperature setting, you can do it from the control panel or remote control.

In addition, the air conditioner may have suffered an unexpected malfunction. Gree air conditioners may malfunction under long-term use or other factors, resulting in the temperature being unable to be adjusted. This can be caused by faulty circuits, compressor issues, or damage to other components.

In this case, it is advisable to contact a professional air conditioner maintenance personnel immediately for overhaul and repair.

In short, the Gree air conditioner keeps showing 26 degrees, which may be due to the temperature sensor and the only land barrier, the temperature setting is fixed, or the air conditioner is faulty. Users can take appropriate measures to troubleshoot and resolve the problem based on the specific situation.