Why do other keys fail to work after the Rongshida washing machine unlocks the child lock?

After the Royalstar washing machine unlocks the child lock, the other keys are not working, it may be that the dragon is taking the control panel button of the washing machine, and there is a failure to turn off the washing machine, and restart it to try it.

Because this child's mode is turned on, it leads to this situation, in this case, the main reason is that you already belong to the lock of this screen state, and you need to cancel it for him.

After the Royalstar washing machine unlocked the child lock, the other keys were not working. There's a good chance you've broken the other keys while unlocking. You can go to the after-sales service and ask him to help you change one.

Because you have turned on the child mode, it is temporarily unusable, so you need to unlock the child mode for him, so that it can be used normally.

After the Royalstar washing machine is unlocked, the keys are not working, it depends on your settings, if it is accurate, this situation will not occur, unlocking is very easy, as long as it ends, follow the settings to accept.

Hello friend Royalstar washing machine after unlocking the child lock, other keys are not working, may be the system chaos will cause such a reason, I hope to help you.

If the other keys are not working, then you have not unlocked it successfully and need to operate it again.

After the child lock is turned on in the Royalstar washing machine, other cases have been turned off, just like the child lock of the air conditioner, which cannot be operated.

After the Royalstar washing machine unlocks the child lock, why do other keys not work, this amount is small, it must be a setting and something that can't sit still, I just turned it off, but it can't operate normally.

If the child lock is locked, the other buttons cannot be used.

Royalstar washing machineIf you unlock the child lock, you have to reset it before you can use the other keys.

Hello friend, you can shut down and restart it again, and the child lock should not be unlocked, thank you.

In this case, there may be a problem with the washing machine, and there is also a possibility that the professional who set up the washing machine has not set it up properly.

If there is an unlock, other buttons are not good, so that you can restart the device again.

You can do it again by referring to the instructions.

After the Royalstar washing machine unlocked the child lock, the other keys didn't work, don't you think that? It shouldn't be used with so many features.

After the warrior took the washing machine and unlocked the child lock, the other keys were gone.

Summary. Hello, the unlocking method of the door lock of the Royalstar washing machine is as follows: 1. The middle display of the two buttons on the Royalstar washing machine is a child safety lock; 2. Press and hold the two buttons at the same time for 3 seconds to directly unlock the child safety lock; 3. Child safety lock, when the washing machine is working, press these two buttons at the same time, the washing machine will be locked, if the child presses the button randomly, it will not work.

Only by pressing and holding the same button at the same time to unlock it, the other buttons of the washing machine can be restored.

Hello, the unlocking method of the door lock of the Royalstar washing machine is as follows: 1. The middle display of the two buttons on the Royalstar washing machine is a child safety lock; 2. Press and hold the two buttons at the same time for 3 seconds to directly unlock the child safety lock; 3. Child safety lock, when the washing machine is working, press these two buttons at the same time, the washing machine will be locked, if the child presses the button randomly, it will not work. Only by pressing and holding the same button at the same time to unlock it, the other buttons of the washing machine can be used to resume the use of filial piety.

Extended information: The correct maintenance method before the completion of the washing machine can make the washing machine last longer (1) The washing machine has been out of use for a long time, so it is necessary to remove stagnant water and keep it clean and tidy. (2) It should be placed in a dry, non-corrosive gas, no strong acid and strong alkali erosion, so as to avoid rust of metal parts and reduce the insulation performance of electrical components.

3) If it is a washing machine, if there is no oil filling hole for the wheel shaft, the washing machine should be filled with oil once to prevent rust. (4) The washing machine that has been stored for a long time should be covered with plastic cloth or cloth cover to avoid dust erosion and keep the washing machine bright and tidy. (5) The machine should be turned on every other month to prevent the parts from rusting and the motor winding from being damaged by moisture.

Energizing is also a means of drying the windings, which avoids failures caused by prolonged downtime. (6) The washing machine should not be exposed to direct sunlight for a long time, especially for plastic devices, so as not to fade and age.

1. Wash clothes normally before opening the child lock key. Connect the faucet first, turn on the power, adjust the water volume and program, and click "Start".

2. Open the child lock. As shown in the figure, the left and right sides of the child lock icon are "water volume" and "reservation" respectively. Press and hold both keys at the same time for 3 seconds. The child lock key is successfully activated (at this time the control panel.

The other keys are invalid, and there is no response when pressed).

3. Unlock the child lock. The method is the same as opening the child lock, press and hold the two buttons of "water volume" and "reservation" at the same time for 3 seconds, and the child lock will be automatically released (only by pressing and holding the same button to grind potatoes at the same time to unlock, the other buttons of the washing machine can be restored).

1. Wash clothes normally before opening the child lock key. Connect the faucet first, turn on the power, adjust the water volume and program, and click "Start".

2. Open the child lock. As shown in the figure, the left and right sides of the child lock icon are "water volume" and "reservation" respectively. Press and hold both keys at the same time for 3 seconds. The child lock key will be activated successfully (at this time, the other buttons of the control panel are invalid, and there will be no response when pressed).

3. Unlock the child lock. The method is the same as opening the child lock, press and hold the two buttons of "water volume" and "reservation" at the same time for 3 seconds, and the child lock will be automatically released (only by pressing and holding the same button at the same time to unlock, the other buttons of the washing machine can be restored).

The failure of the program controller is caused by the burning of the drain solenoid (generally the thyristor that controls the drainage), and the controller needs to be repaired. The reason why Royalstar washing machine does not drain is basically caused by the above faults, as long as you check them one by one, it is not difficult to discharge the fault.

Hello, it is a pleasure to serve you and give you the following answers: Reasons:1

The child lock feature may not be set up correctly, or the passcode may be set incorrectly. 2.The Child Lock function may have been activated by Bi Hui, but the code was not set correctly.

Workaround:1Check that the child lock function of the washing machine has been set up correctly, if not, please follow the instructions in the manual to set it up.

2.If the child lock function has been activated, please follow the instructions in the manual to reset the code. Steps:

1.Turn on the power of the washing machine and press the "Switch" button to turn on the power of the washing machine. 2.

Press the "Settings" button to enter the settings menu. 3.Select the "Child Lock" option and press the "OK" button to enter the Child Lock settings menu.

4.If the child lock function is not activated, please follow the instructions in the manual to set it up; If the child lock function has been activated, please follow the instructions in the manual to reset the password. 5.

Press the "OK" return button to save the settings and complete the child lock settings. Personal tip: Using the child lock function can effectively prevent children from misoperating the washing machine, thus avoiding possible dangers.

Therefore, when using the washing machine, the child lock function should be set up correctly to ensure safety.

Hello, it is a pleasure to serve you and give you the following answers:1Reason:

The old display child lock of Royalstar automatic washing machine may be caused by the failure of the control panel of the washing machine. 2.Workaround:

To solve the old display child lock of Royalstar automatic washing machine, first check whether the control panel of the washing machine is faulty. If there is a fault, you can use a special rental tool to remove the control board of the washing machine, and then unplug the terminal on the control board with an electric drill to check whether the contact is bad, if there is a poor contact, you can use a cotton swab to clean the terminal, and then install the control board back, restart the washing machine, and return to normal. 3.

Personal tips: If you want to solve the old display child lock of Royalstar automatic washing machine, you need to have a certain maintenance technology, if you don't have maintenance technology, you can find a professional maintenance master to help solve it, so as not to cause unnecessary losses.

Hello, it is a pleasure to serve you and give you the following answers: Reasons:1

The child lock feature may not be set up correctly, or the passcode may be set incorrectly. 2.The child lock function may have been activated, but the code was not set correctly.

Workaround:1Check whether the child lock function of the washing machine has been set correctly, if it is not in Chunguo, please follow the instructions in the manual to set it.

2.If the child lock function has been activated, please follow the instructions in the manual to reset the code. Steps:

1.Turn on the power of the washing machine and press the "Switch" button to turn on the power of the washing machine. 2.

Press the "Settings" button to enter the settings menu. 3.Select the "Child Lock" option and press the "OK" button to enter the Child Lock settings menu.

4.Press the "Setup" button, enter a new password, and press the "OK" button to complete the setup of the child lock. Personal experience orange imitation:

The use of the child lock function can effectively prevent children from operating the washing machine by mistake, thus avoiding possible dangers. Therefore, when using the washing machine, it is important to set up the child lock function correctly and regularly check whether the child lock code is correct.

Hello, I am happy to serve you and make the answer for you: Reason: 1

The function of the child lock can be poor, and the orange can not be set correctly, resulting in the normal use. 2.The control panel of the washing machine may malfunction and may not be able to be used properly.

Workaround:1Check that the child lock function of the washing machine is set correctly, if not, please follow the instructions in the instruction manual to set it up.

2.If you find that the child lock function has been set up correctly, but it still does not work properly, it may be that the control panel of the washing machine is faulty and needs to be replaced. Steps:

1.Turn on the power of the washing machine, press the child lock button on the washing machine, and check whether the child lock function is set correctly. 2.

If the child lock function is not set up correctly, please follow the instructions in the manual to set it up. 3.If the child lock function has been set up correctly, but it still does not work properly, it is possible that the control panel of the washing machine is faulty and needs to be replaced.

Personal experience: When using the washing machine, be sure to check whether the child lock function is set correctly to avoid the situation that it cannot be used normally. If you find that the child lock function is not set correctly, please follow the instructions in the manual to set it up to avoid unexpected situations.

If you find that the child lock function has been set up correctly, but it still does not work properly, it is possible that the control panel of the washing machine is faulty and needs to be replaced.