-
You can find the opt-out option in the settings, click on Auto-opt-out to do it automatically.
-
Epson 82k f printer continuous printing how to set up automatic configuration how to set automatic configuration, you just set it according to the manual, you don't have to worry about it, he can return it himself, only return only.
-
This should be found on the screen of the printer to set the automatic return.
-
The printer prints continuously, and the setting like this automatically retires, first of all, your printer supports this automatic operation.
-
Epson 82k, his printer we contact to print, it is also automatically postponed by setting, and it can still better help us all.
-
How to set the automatic unwinding of the Epson 82kf printer for continuous printing? Go up to find it according to the manual, and then ask how to install it after sale? How do I go about automatic retirement?
-
Epson printers how to use.
1. If you want to print out the correct text and materials, the printer must be linked to the computer. Plug the printer's cable into your computer, and a hardware prompt will appear on your computer.
2. The epson printer itself carries a driver, it will install itself on the computer, and after waiting for a while, we can use it.
3. On the control panel of the computer, add "Epson Printer", and then the computer will prompt us to print the test.
-
Epson 82kf printer continuous printing, how to set up automatic, don't you have a manual?
-
If the weather is printed continuously, how do I set up automatic retirement? If that's the case, you can directly press the settings button, inside the text function.
-
In this case, you have to find his control panel to set it, so in this case, there are some words that do not have such a function, and a few new ones are available.
-
Adjustment method of paper cutting (automatic unwinding) of the dot matrix printer: 1. Put the paper into the state to be printed - turn off at this time - press and hold the (cut paper font) key before turning on the machine again, and turn on the power switch of the printer. At this point, the print head will automatically go to the middle position and print out the current setting state.
Generally, it will show that the auto-cutting is off) 2. If you want to change the settings, please put another A4 sheet of paper, and the printer will automatically suck it in. At this point, you must press the (Cut Font) key again. The printer will print out detailed instructions for the changes, a total of three sheets of A4 paper.
Wait until you have finished printing before you can change the settings. After printing, do not move any buttons. 3. Change the settings!
At this time, press the (cut paper font) key 2 times, and the two lights on the right will be on. Press the (line break, page change) button again 2 times, and the middle light will be on. (Auto Cutting Set) Close the printer to save the settings, and the settings are complete.
Please note that if there is an error in this step, please follow the 123 steps of the operation again to start the new setting, so be careful with this operation. 4. In this way, you can change the state of the automatic paper to open the stool. 5. After adjusting, put in the A4 paper, and then press and hold the (cut paper font) button, and then turn on the power switch of the printer.
Print out the current settings and check whether the auto-cutting pie is turned on. (Generally, it will show that the automatic paper cutting is on) 6. If it is a paper similar to an invoice, you need to adjust the adjustment lever on the side of the dot matrix printer to the second grid.
-
Printer offline dismissal method steps:
1. Click the win icon in the lower left corner of the computer desktop.
2. Click the "Control Panel" option in the pop-up menu list.
3. Change the viewing mode to the "Big Icon" option in the "Control Panel".
4. Click on the "Devices & Printers" option below it.
5. Double-click the offline printer device.
6. Click on the "Printer" option in the upper left corner.
7. Click the "Use Printer Offline" option in the pop-up menu list.
-
Summary. Solution: 1) Replace the copy paper. 2) Please check whether the paper roller of the machine is aging, if it is aging, please replace it. 3) Reach in with your hand from the paper feed port and touch the plastic paper guide piece to make it smooth and the machine recovers. Dot matrix printers.
1. Causes of failure: 1. Because of the high utilization rate, the dust caused by the long time is not fed, and the wear and tear of the paper wheel. 2. Some also have a certain relationship with paper.
Standard A4 paper above 70g is easy to advance because it has a certain stiffness. 3. Thin paper that is cut into small sheets of custom specifications is not easy to enter, and even wrinkles. The new printer can be used, but if it has been used for a long time and it is dusty, the coefficient of friction must be considered, and you have to use your hands to advance it.
2. Troubleshooting method: 1. Remove the screws at the front and rear corners, and remember to pull out the roller handle located on the right side of the printer to disassemble the upper shell of the printer and other detachable link paper feeding components. 2. When installing back, you also have to change the position of the left and right, because they are all used for the left side of the paper feeding, and the multi-feed small wheel can be pressed without compacting to increase the contact with the roller.
Install it back and check it once and then power on the machine.
How to solve the problem that the printer keeps returning paper.
Solution: 1) Replace the copy paper. 2) Please check whether the paper roller of the machine is aging, if it is aging, please replace it. 3) Reach in with your hand from the paper feed port and touch the plastic paper guide piece to make it smooth and the machine recovers. Dot matrix printers.
1. Causes of failure: 1. Because of the high utilization rate, the dust caused by the long time is not fed, and the wear and tear of the paper wheel. 2. Some also have a certain relationship with paper.
Standard A4 paper above 70g is easy to advance because it has a certain stiffness. 3. Thin paper that is cut into small sheets of custom specifications is not easy to enter, and even wrinkles. The new printer can be used, but if it has been used for a long time and it is dusty, the coefficient of friction must be considered, and you have to use your hands to advance it.
2. Troubleshooting method: 1. Remove the screws at the front and rear corners, and remember to pull out the roller handle located on the right side of the printer to disassemble the upper shell of the printer and other detachable link paper feeding components. 2. When installing back, you also have to change the position of the left and right, because they are all used for the left side of the paper feeding, and the multi-feed small wheel can be pressed without compacting to increase the contact with the roller.
Install it back and check it once and then power on the machine.
What should I do if the printer keeps returning the paper.
Before, it was all forward paper to print invoices, the power was off, and suddenly it kept retreating, and the key sound was very loud.
1. First open the front cover of the dot matrix printer. 2. Secondly, break the white cards on both sides of the paper roller of the fixed needle printing machine. 3. Remove the paper roller of the dot matrix printer.
4. Then install the paper roller of the new dot matrix printer. 5. Finally, print the test paper, and the dot matrix printer feeds the paper normally.
-
Hello, I'm glad to have you answering this question. You can try it first, make sure that the data cable connection port is correct, the printer is powered on, and then double-click the offline printer icon in the computer control panel - > device cooker and printer, and then in the printer drop-down menu, check the "Use printer offline" option before trying to print.
-
The function of the paper infeed and ejection system is to move the printing medium along the longitudinal direction, and when the printing medium moves along the longitudinal direction from the surface of the photosensitive drum through the silver to complete the longitudinal printing. According to the order of paper in and out, the paper in and out system is composed of paper detection sensor, paper guide board, paper guide roller, paper feeding motor, reduction tooth locust vertical wheel group, Hu Mingyan plastic paper sheet guide shaft and other devices.
1. Click the "Start" button on the system desktop - > "All Programs" - >Devices and Printers".
2. Select the target printer, right-click the shortcut menu and select "Print First Item".
3. Select "Paper Tray Selection" - >Auto Selection" from the drop-down list of "Paper" options
4. Select "Hand Feed Paper Tray", and then we see that the printer in the lower left corner "Hand Feed Paper Tray" is blue, that is, it is already in working condition.
5. Click "Apply" and "OK" to save the settings.
-
Printer offline dismissal method steps:
1. Click the win icon in the lower left corner of the computer desktop.
2. Click the "Control Panel" option in the pop-up menu list.
3. Change the viewing mode to the "Big Icon" option in the "Control Panel".
4. Click on the "Devices & Printers" option below it.
5. Double-click the offline printer device.
6. Click on the "Printer" option in the upper left corner.
7. Click the "Use Printer Offline" option in the pop-up menu list.
-
I don't know if there will be a difference between different printers, I use OKI's, you can try first, make sure that the data cable connection port is correct, the printer is turned on and online, and then double-click the offline printer icon in the computer control panel - > device and printer, and then in the printer drop-down menu, check off the "Use the printer offline" option before trying to print.
Driver issues Reinstalled.
The previous ink dried, blocking the inkjet part.
Print overlap can be caused in part by a problem similar to a paper jam on the printer. >>>More
The printer should take the jammed paper according to the jammed part (laser printer). >>>More
Hello: Please follow the following method to test.
Please make sure that the printer is turned on normally, and the "Out of Paper" and "Pause" indicators are not always on or flashing, if these two indicators are on or flashing, please refer to the random "Operation Manual" for troubleshooting. You can use the Epson Operator's Manual. >>>More