What do I need to pay attention to if I want to engrave a disc on my computer?

Dust and moisture are the old enemies of optical storage devices, dust falling on parts such as the laser head will affect the performance of the optical drive, and the humid environment will cause the circuit inside the optical drive to malfunction. First of all, it is necessary to prevent dust from entering the optical drive and falling on the bald head. Perform the necessary cleaning before inserting the disc, and minimize the number of times you open and close the compartment door to avoid dust falling onto the laser head as the air drawn in by the case fan flows through the optical drive.

In the menu bar of the software there is the Tools option, click on Tools and select Burn Disc Image. When you click it, the burn operation page will appear. It's generally just a default here.

You need to find the ISO file you want to burn first. When everything is ready, you can directly click burn and the program will automatically burn the disc. Wait about 5 minutes for the burning to complete.

Close the dialog box and go to the disc. A system disk is burned.

Do not open and close the warehouse door frequently, because the power of the laser head and spindle motor is the largest after the disc is put into the warehouse, so if you frequently enter and exit the warehouse, it will naturally accelerate the aging of these components, so try to avoid frequent disc changes, and it is best to copy the disc to the hard disk for frequent use.

For some friends who use old computers, I have to regret to tell you: I am afraid that your wish to engrave the disk may not be realized. Because it occupies a lot of resources on the machine when burning discs, this is why some friends will hear the phrase "machines with high configurations have a higher success rate than machines with low configurations".

The minimum configuration to use the burning optical drive is PII300MHz, 64 megabytes of memory, because the memory and CPU are the most used when burning the disc. For the sake of your beloved computer, please do not burn discs with a burn optical drive on a computer with an underconfigured machine.

Nowadays, many optical storage products have adopted a fully dustproof design to ensure the normal operation of the optical drive and extend the service life of the laser head. In addition, the humid environment will cause the internal connector of the optical drive to oxidize and cause poor contact failure, so try to keep the indoor humidity not too high.

Nowadays, the market is full of all kinds of counterfeit, miscellaneous, and smuggled inferior burning drives. Although they are cheap, there are many hidden dangers in use, such as the scrapping of optical drives, and the injury of man and machine, which outweighs the loss. Therefore, when you buy a burning drive, you must choose a brand with a good reputation to burn a CD-ROM drive, and don't hold the mentality of saving and blindly obeying the nonsense boasting of profiteers in this regard, otherwise it will be everyone who regrets it.

As the saying goes, "A good horse deserves a good saddle." "A good burning disc drive must be paired with a good burning disc, so that users can experience the best burning effect when using it.

There are many cases of burning CD-ROM drives scrapped due to the use of inferior burning discs, so we must not let this bloody lesson happen to our users again.

Landlord,Although it is generally not recommended to use the ***-rw that comes with the laptop to burn discs,But sometimes you have to do this。 There are three main points to note when doing so.

First, use the burn with the laptop battery sufficient, or burn in a place that is convenient for an external power supply. Because of the power interruption during the burning process, it is inevitable that the disc will be scrapped first, and at the same time, it is also a great damage to the burning CD drive.

Second, please do not vibrate or change the position of the laptop during the burning process, because a high-speed platter also brings huge centrifugal force while changing its rotation angle, which can easily damage the spindle of the recorder and cause damage to the recorder.

Third, pay attention to heat dissipation, because the recorder is very hot when working, and at the same time, when the notebook is burning, it is also working at a very high power, and the laptop is very hot at this time, if the heat dissipation is not smooth, it is easy to cause the crash due to high temperature, thus scrapping the disc, and even damaging the optical drive.

As for the burning software,I don't know others,Anyway, I just use the burning software that comes with win7The effect is good! As for Nero......That ......It's too power-hungry on my laptop, so I don't usually use it, but I usually use it on desktops!

As for the ...... that some people say not to run other programsHa ha! I don't know others my laptop i5 processor, 4G memory, anyway, I play games when I'm burning, and it's also often.

It is not recommended to burn discs with a laptop, because it is very troublesome if the optical drive is broken, it is recommended that you connect an external optical drive, which should be very cheap now, about 130-150 can be done.

There is nothing to pay special attention to, to burn the disc must be a recorder, to burn a CD disc at least a CD recorder, to burn *** disc to *** recorder, burning software I generally use nero

The first thing to pay attention to is to close other apps. The second is to try not to terminate the burning program while running the program. The third is to use software that is more convenient.