-
It is recommended to go to the official website after-sales repair point for repair as soon as possible, and the longer the delay, the less optimistic the situation of the mobile phone.
-
1.Do not try to turn on the device immediately if there is water ingress. Because the iPhone has a built-in battery that cannot be removed, the motherboard will be short-circuited if it gets into the water, and if it is turned on, the motherboard will be burned, causing irreparable consequences.
2.You can first use toilet paper to dry the water outside the mobile phone, and then place the mobile phone screen horizontally to prevent water from flowing to the motherboard, and then use a blow dryer to dry the water, and turn on the temperature at medium or small temperatures.
3.Wipe down the circuit board with anhydrous alcohol and try to turn it on. Because alcohol volatilizes quickly, the moisture on the circuit board can be volatilized clean.
4.Send it to a repair center for repair as soon as possible. If the motherboard is severely corroded over time, it will cause irreparable consequences.
-
If the phone is flooded, it can be opened and cleaned. If the water ingress is not very serious, apply a tissue to the phone to absorb the water through the holes and crevices of the phone. Turn on the SIM card slot and other places that can be opened, and then use a hair dryer to dry the water on your phone.
Pay attention to control the temperature of the blowing air to avoid overheating and damaging the phone. If you feel a lot of water, it is best to go to a mobile phone store and open your phone to clean it up.
-
It can be repaired, go to the mobile phone repair point and ask.
-
You still go to a mobile phone repair shop to repair it, and find a repair master to show you your phone.
-
Generally, if there is water ingress, it is impossible to warrant, which is man-made damage, and it is impossible to guarantee all brands of mobile phones. If the iPhone accidentally gets into the water, you should turn off the phone immediately, place the phone screen down horizontally, wipe the phone with a dry towel, dry it with a hair dryer, and then send the phone to the repair center as soon as possible for a professional to repair.
Friends who have a hair dryer around you can simply blow the iPhone with hot air, pay attention to blowing in all directions, and blow the hair for the headphone jack, speaker and other parts. Be careful to keep a certain distance, and remember not to blow a little too much for too long. You can also blow on your iPhone with the back cover removed, so remember to keep it at a distance and blow it evenly.
-
Any mobile phone that falls into water is not covered by the warranty, because it is caused by man-made damage and is not covered by the warranty.
-
The Apple 11 phone is flooded, can it be warranted? The Apple 11 mobile phone can be guaranteed during the warranty period, but it is not possible if the warranty period has expired.
-
Can be repaired. Go to the maintenance department, and the maintenance personnel will disassemble the phone and replace the moisture and damaged parts inside, so that it can be used normally.
-
If you are still under warranty, you should be able to, but it also depends on some parts in exchange for which you still need to pay for yourself.
-
According to the iPhone's warranty policy, damage to the iPhone caused by immersion in water and other liquids is not covered by the warranty.
-
Okay, look you're **bought.
-
How to deal with the water after the iPhone is ingressive.
1.Turn off the phone as soon as possible, cut off the power, and do not try to turn it on again to avoid causing a short circuit in the motherboard.
2.Remove the SIM card and use a tissue or cloth to remove water from the outside and crevices of the phone.
3.If there is light water ingress, you can wrap the phone with a paper towel, put it in a bag and put it in a small bag of desiccant.
4.The mobile phone cannot be turned on after entering the water, most of the chips such as the motherboard and CPU are short-circuited and burned, and it is recommended to send it to the after-sales service center for repair immediately.
Don't try the following wrong methods after your phone gets into water.
1.Don't shake your phone too hard. Because under the constant shaking, the liquid will swim inside the machine, and the moisture may enter deeper and burn the internal chip of the machine.
2.Don't use the hot air of a hair dryer to dry your phone for a long time. iPhones are now all metal bodies, and metal conducts heat easily, which will blow off the solder joints of the motherboard inside the machine, causing the motherboard to malfunction.
3.Do not attempt to charge a phone that has been flooded. An iPhone that gets into the water may have water stains inside, which can burn out the motherboard when it is powered on and cause a more serious failure.
4.Do not leave your phone in water for a long time. In the case that it cannot be used normally after two or three days after general treatment, it should be sent for repair immediately, and long-term placement will cause the motherboard to be corroded, or even unable to be repaired.
-
I'm a mobile phone repair engineer, let me tell you.
Apple 11 is IP68 waterproof, if there is not much water in, it is no problem at all, such as after taking it back, there is nothing that can be ignored.
However, if you soak in water for a long time or have dismantled the machine before to destroy the watertightness, it will definitely not work.
If there is a black screen, no boot, restart, and the screen does not move after entering the water, it is likely that there is a problem with the screen or motherboard.
Since water ingress is not covered by the after-sales warranty, it can only be repaired at a cost.
Pay special attention to motherboard maintenance, and don't replace the entire motherboard as soon as you hear that the motherboard is broken.
If the motherboard is broken, don't be afraid, the motherboard is not a whole piece, there are many small chips in it, including baseband, CPU, hard disk, WiFi module, touch screen IC and so on.
Many small local masters don't know how to repair chips, so they let the entire motherboard be replaced, which is very expensive.
In fact, you only need to change the chip, which can save more than half.
The chip repaired in the picture below is the most common power supply IC, and if it is burned, the screen will be black and it will not turn on, so just replace it. The cost is 23 hundred, don't listen to what the small store says, change the motherboard of 23 thousand at every turn.
I have been doing mobile phone chip repair, and I know these very well.
-
No matter what kind of mobile phone gets into the water, first dry the water in the mobile phone, then put the mobile phone in a rice bag and wait for two days to take it out, and you can use aqui te amo.
-
No matter what mobile phone is flooded, try to wait for the mobile phone to dry almost before turning it on, the waterproof function of the Apple mobile phone is also good, if it is not a long time of water ingress, there is no problem, you can turn it on later, as long as it can be turned on, personal experience, for reference only.
-
First of all, turn off the mobile phone, wipe the surface water dry, put it in a container with rice, and turn it on again after 24 hours.
The three most important things to do when your phone gets into water. >>>More
2. Turn off your iPhone immediately. Once your iPhone falls into water or gets into it, disconnect it immediately. Because the damage to mobile phones is often not caused by water itself, but by short circuits of internal components triggered by water, or even further cause the components to burn out or the battery**. >>>More
When you are charging the iPhone 11, if you find that the iPhone 11 is heating up severely, please try to remove the case to help the phone heat dissipation, the phone case will cause the heat in the phone body to be difficult to discharge. >>>More
Blue Whale TMT Channel on October 26, TechWeb reported that in response to the sharp decrease in iPhone 12 battery life after turning on 5G, Apple's iPhone Vice President of Marketing Kaiann Drance responded that iPhone12's increased intelligent data mode can balance data and power, in addition, Apple is improving battery life through software systems and cooperation with operators. >>>More
The reason why the iPhone 11 consumes a lot of power:
1. The mobile phone system costs electricity. >>>More