What is the main function of a cigarette lighter

The cigarette lighter is used to light cigarettes, but it has some additional uses, such as the power interface of the mobile phone charger, etc.

Cigarette lighting is the main function, and now it is extended to the functions of many devices, in fact, it can be said that it is the power supply function.

It is used to eject and shoot the passengers in the back seat!!

Lighting a cigarette is also one of its uses, and of course you can also use it to light matches.

Generate heat energy!! Wasted power !!

It can also be used to light carpets when they fall to the ground.

This gentleman asked a very high level of questions:

The cigarette lighter appears to be for lighting cigarettes, but in fact it is not only used for lighting cigarettes, it also serves the following purposes:

What do you say you can do to light a cigarette

Plug the cigarette lighter into the power socket of the car, and press down to fix it, when the temperature of the heating wire of the cigarette lighter reaches, it will automatically pop up, at this time the heating wire is red, we can light the cigarette, after the incident, put the cigarette lighter back to the power socket position.

It should be the habit of most car owners to use the cigarette lighter jack as a car power supply, but we should avoid using electrical appliances with more than 120W power in the car. Because the maximum current that the cigarette lighter circuit can withstand is generally 10A (there are also 20A). According to the calculation of the 12V voltage of the cigarette lighter jack, if the total power of the on-board electrical appliances exceeds 120W, then the cigarette lighter circuit will be overloaded.

The relevance is as follows. Precautions for the use of cigarette lighters.

1. After the car is turned off, disconnect the charging cable on the cigarette lighter. If you forget, it may cause the whole car to run out of power and damage the car battery.

2. When the cigarette lighter is connected to the on-board electrical appliances, it should not exceed the rated power, otherwise it will cause the fuse to break, damage the automobile circuit system, and even cause the car to spontaneously combust.

3. When using the cigarette lighter, do not shake it frequently, it is easy to cause the circlip to loosen and deform, and even short-circuit and burn the fuse.

Hello, turn on the car and plug the cigarette lighter into the car power outlet.

Please click Enter a description.

and press and hold down to lock.

Please click Enter a description.

When the temperature of the heating wire of the cigarette lighter reaches it, it will automatically pop out, or wait for 5-8 seconds for the heating wire to turn red.

Please click Enter a description.

You can also unplug it manually, and after lighting the cigarette, put the cigarette lighter back into the power socket position.

Please click Enter a description.

How should a car cigarette lighter be used?

The electronic cigarette lighter will automatically heat up after pressing once, and will automatically pop out after 5 to 8 seconds of heating, and you can light the cigarette after ejection.

1.Power on your car. (Some cars must be powered on before they can use the cigarette lighter power) 2Plug the cigarette lighter into an electrical outlet.

3.Plug the cigarette lighter into your car's electrical outlet and press down to lock (secure).

4.The cigarette lighter starts to heat up, and when the temperature of the cigarette lighter heating wire is reached, it will automatically pop up.

5.Or wait 5-8 seconds for the heating wire to become red, you don't need to wait until it pops out on its own, you can also pull it out manually.

6.After lighting the cigarette, return the cigarette lighter to the power outlet.

The cigarette lighter is located under the center console, press the cigarette lighter button, the cigarette lighter will automatically heat, and when the temperature is enough, it will automatically pop open, and it can be taken out and used. The Honda Accord cigarette lighter jack is located in the front cover of the center gear handlebar, and it only needs to press down the handle of the cigarette lighter to start heating, and it will automatically pop out when it is finished. Pull out the cigarette lighter, use the heated end inside to light the cigarette, and touch the cigarette to the hot place.

Cigarette lighters do not produce open flames, so it is recommended to use them for smoking while driving.

How to use the cigarette lighterStart by plugging the cigarette lighter into your car's electrical outlet. Then press the button in the middle of the cigarette lighter. At this time, the cigarette lighter will automatically heat up, and the cigarette lighter will automatically pop out after the heating is over.

Finally, take out the cigarette lighter, and at this time you can see the red-hot heating wire, just use it to light a cigarette.

The cigarette lighter is a component that all cars have that is used to facilitate the ignition of the cigarette when the owner smokes. A cigarette lighter is a thing used to light a cigarette. However, the cigarette lighter we often say is divided into the kind that takes electricity from the power supply, and the cigarette lighter produced by some manufacturers is not used to light hail cigarettes, but is only used to draw electricity from the top of the car, and this kind of cigarette lighter is also called cigar head.

The functions of the car cigarette lighter are: 1. It can be used to light cigarettes2. Convert the 12V, 24V or 48V DC power on the car into 220V 50Hz AC power supply, which can be used for ordinary electrical appliances.

What are the functions of the Crown car guide rod, the guide lever can help the driver judge the distance between the front of the car and the obstacle in front, and can also help the driver accurately judge the direction of the front of the car. The Crown is a mid-to-large car owned by Toyota, and this car is basically the same class as the Audi A6L and BMW 5 Series. The wheelbase of the crown is 2925 mm (mm), and the length, width and height are 5020 mm (mm), 1805 mm (mm), and 1480 mm (as follows).

The last generation of the Crown uses a turbocharged engine, codenamed 8AR-FTS, which has a maximum power of 173kW and a maximum torque of 350Nm, with a maximum power of 5,200 to 5,800 rpm and a maximum torque of 1,650 to 4,400 rpm. The engine is equipped with VVT-IW technology and hybrid injection technology, and uses an aluminium alloy cylinder head block. The use of aluminum alloy cylinder head blocks can reduce the weight of the engine, which can improve the car's handling and fuel rationality.

Engines equipped with hybrid injection technology have both multi-point EFI and in-cylinder direct injection, so that the engine can choose different fuel injection methods under different working conditions, which can improve the power and efficiency of the engine.

Mated to this engine is an 8AT transmission. The use of 8AT transmission can improve the smoothness of shifting and fuel rationality of the car, and the reliability and durability of AT transmission are also relatively better. The front suspension of the Crown uses double wishbone independent suspension, and the rear suspension uses multi-link independent suspension.

Photo by Pacific Automobile Network Q&A).

Sorted out the "What is the principle of cigarette lighter?" that everyone often pays attention to? ", as follows. A cigarette lighter is a component that all cars have that is used to facilitate the ignition of the cigarette when the owner smokes.

In addition to lighting cigarettes, the car cigarette lighter can also be equipped with an on-board inverter, which can convert the 12V, 24V or 48V DC power on the car into 220V 50Hz AC power supply, which can be used by ordinary electrical appliances.

The disassembly and assembly method of the cigarette lighter is as follows:

1. Screw the shell: behind the seat of the cigarette lighter of some cars, the screwed shell is installed, which can be screwed down by the opposite direction, and then installed again in the positive direction;

2. Dismantle the screws: Some cars are fixed with screws behind the seat of the early cigarette lighter, as long as the screws are removed with a wrench, they can be removed, and the screws are screwed on and installed again;

3. Dismantle the panel: remove the panel of the gear operation bar, the panel is made of plastic hook, and you only need to break one side directly by hand or it with a slotted screwdriver to disassemble the whole panel;

4. Remove the panel screws: When the panel of the gear operation lever is removed, press the panel door of the cigarette lighter to open automatically, and then see two black screws, use the M4 hex wrench to remove them;

5. Dismantle the panel box: directly pull out the panel plastic box of the cigarette lighter by hand, and when it is about 10 cm out, pull out the connecting wire first, only in this way can the whole box be pulled out;

6. Operate the inner and outer rings: the cigarette lighter contains two parts: the outer and inner rings, press the inner ring into it when using, and after reaching a certain temperature, the inner ring will automatically spring back to the original position, and then the outer ring can be pulled out by hand.

Millions of car purchase subsidies.