What are the installation tips for wireless routers

1. Connect the wireless router to the network cable and modem. (The LAN port of the cat pulls a network cable to the WAN port of the wireless router) to ensure that the network is smooth and all indicators are on normally;

2. Open the network and sharing center of the computer, search for wireless signals, when you find the signal of the wireless router, open the browser, enter the address of the wireless router: generally this address), and then enter the user name and password (generally admin) in the prompt box. The specific can be viewed on the router; Generally on the back of the router;

3. Click Setup Wizard in the configuration center that opens, and then click Next.

4. Then select the Internet access method, click Next and enter your broadband or Internet access password. If it's not a monthly subscription, you'll have to think about it; After entering the password; In the future, after your computer is turned on, it will automatically dial up to access the Internet. This means that you don't have to manually connect to broadband every time.

If you don't want to automatically dial up the Internet, you can leave it out here;

5. Set the password of the wireless router, which can prevent others from stealing your network resources;

6. After the final setting is completed, you need to restart the router to make the settings take effect, and you can use the wireless router to surf the Internet.

There is no skill, follow the steps, very quickly, if you are still troublesome, it is better to buy a portable wifi, such as Tencent national wifi is good, the signal is better and more stable, the security of the network is also ***, *** scan directly join the wifi, convenient and fast, at the same time, it can support 32 devices to join the network at the same time, cross-network acceleration can be achieved for Tencent's online games, and there are also some mobile games such as the national plane war, the national town and the rhythm master will give away game gift packages. And a talent, very good, go check it.

Here's how it works:

1. After powering on the router, turn on the mobile phone and enter the router setting address in the mobile phone browser.

2. On the page that pops up, enter the account and password on the router nameplate to enter the router settings page.

3. After logging in to your account, click the network button to enter.

4. Then click the WLAN network configuration button to enter, and then enter the password you need to set in the wireless network key below Europe and the United States, click the confirm button, and the installation is completed, and it can be used normally.

Before setting up the phone, plug in the power supply of the router and plug the network cable into the WAN socket of the router, if the WAN light on the router is flashing, it proves that there is a signal source.

2.Next, enter the mobile phone [Settings] - [Wireless Network], you can see that the router has automatically created an initialized wireless network, some Android phones need to check [Network Notification] to see, directly connect to this wireless network, no password is required, but you can't access the Internet for the time being.

3.Open the browser of the mobile phone, enter and open it in the address bar (the login address of different brands of routers is different, you can see the label or manual at the bottom of the router body).

Then you will enter a login interface, you need to enter the default initial username and password of the router, generally the initial username and password are admin, there are also some routers that do not have a password for the first time, and you need to create a password yourself. (If it's neither, then look at the labeling or instruction manual on the bottom of the router body).

4.After logging in to the router, you can enter the Internet access settings, select the Internet access method, generally PPPOE or broadband dial-up Internet access (you can also choose to let the router choose automatically), and then enter the broadband account and password given to you by the network provider, and click Next.

5.The next thing is to set up the wifi account and password, remember to turn on the wireless broadcast, otherwise you will not be able to find this wifi on the mobile phone, after the setting is completed, the mobile phone can be connected to the wifi Internet access.

The installation and setup of the router is as follows:

1.First connect the line, you can refer to the figure below.

3.Once you've logged in to your backend, select Quick Settings and click Next4Choose the way to access the Internet, usually ADSL users choose the first PPPoE, if you use other network service providers, then choose the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

5.Enter the account and password applied for from the network service provider, and go directly to the next step after entering.

6.Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

7.After entering it correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

First of all, you need to connect your host computer to the broadband router, type the router address in the manual in IE or other browsers, enter the username and password, and enter the router's control interface.

Normally, for newly purchased equipment, there will be an explanation of the address and user name and password in the manual, just fill it in according to the above.

It should be noted that usually SOHO-level routers will have one WAN (Wide Area Network) interface and 3-6 LAN (Local Area Network) interfaces. The WAN port is used to connect to the line provided by the service provider, such as ADSL

moden, cell broadband lines, and so on. The LAN port is used to connect multiple machines that need to access the Internet. When configuring, connect the network cable to the LAN port.

Let's take a look at WAN settings.

There are three options, if you dial with ADSL, you have to choose PPPoE or you have to choose according to your intervention.

The WAN port address is the address you get, and the gateway is also given to you by the access provider, remember not to fill in your computer with such settings, fill in the user name and password with the user and password given to you by the telecommunications bureau, DNS needs to consult the service provider, or ask others. Generally, everyone is on a monthly subscription, so here you choose to connect automatically, if you are not monthly and time-sensitive, you can try other methods yourself. There is no need to change the MTU in all settings.

The IP address is the address that communicates with your machine, and you can change it to the address you like, but be careful not to be on the same network segment as the WAN address. It is recommended that you use addresses such as masks. It should be noted that if you change the CIDR block of the address, you need to change your local address at the same time, otherwise you will be unable to connect after saving and restarting.

As for whether to enable the DHCP function, it depends on your needs, if your network traffic is relatively large, I do not recommend you to use DHCP.

First, connect the telecommunication transmission line (** line) to the cat (ADSL), and then connect the cat's socket (LAN) to the wireless router. Next, go to Settings & Connect.

Problems with wireless router settings.

Let's talk about the setting of the router: first make sure that your wireless network card is enabled, and there will be a wireless network card logo in the lower right corner of the system tray (the small computer has a red cross with radiation), click the right mouse button on it and select to view the available network connection, and the control interface for searching for unlimited signals will pop up, and you can see your wireless node when you refresh it

As for the wireless router you bought, it should be configured, check whether the router has been connected to the Internet in the router's management interface, and then check the IP rules, and change the static allocation to dynamic allocation.

That should be fine

ASUS homepage. Select Notebook A8HE

You can find it.

**Yes, the account password is admin

Connect to the wireless router and set it up, open it first**.

Then press the second setup wizard on the left.

Then look at the tips.

One step at a time. Then enter your online account password.

You also need to enter the psk code, which is the key you connect to after receiving the signal with the wireless network card, and finally it is successful.

But wait a minute to get on.

If the signal is not good, it is recommended to buy a signal amplifier, or buy a card king, these are not too expensive, others will not be affected, rest assured.

However, please note that when setting the password, it is set to wpa2+aes, and the password is complicated to add special characters and letters, so as to prevent being rubbed, and do not set it to wep.

So that other people can crack it, and it will rub your net.

Here's how to install and use the wireless router:

After unpacking the router you bought, place it next to the optical modem or broadband Yuncong network cable interface, and turn on the power supply. Then connect the network cable from the LAN interface network port of the modem to the WAN port or WAN interface on the router.

The wireless router can be set up in two steps, the first step is to connect the network cable first, after the popularization of wifi, the wireless router is basically only connected to the network access line. The second step is to set up a wireless router, connect to the operator's network, and then set the wifi password. The Huiqi brand of the wireless router, the model is different, and the setting address of the Biying device next to the wireless router is also different, before setting, you can see if there is a setting address on the back of the router, and the login password.

Precautions for the use of wireless routers

1. The setting interface of different routers is different, but the process and logic are the same.

2. The login name generally has a default, if it is a new router, you can enter the default password, and the old router can reset the router if it does not know.

3. The router login address can be queried by your own router model.

4. Pay attention to the wireless distance: try to put the router high and not in the corner, and avoid obstructions.

5. Pay attention to the influence of interference factors: In order to avoid interference between other wireless devices and the router, keep the wireless router away from the cordless **, microwave oven, wireless mouse and other electrical equipment that is being used as much as possible.

6. If the address of the router is confirmed to be correct, and the computer cannot open the address, you can use the mobile phone browser to try.

Here's how to install and use a wireless router:

Tools: HP Battle 66, Windows 11, Maxthon Browser, TP-linkw802.

1. Follow the diagram to connect the router.

2. First, find the login address of the router on the back of the router, and then open Maxthon Browser on the computer and enter the address to open the login interface.

3. After opening the login interface, enter the password you set when you installed the router for the first time, and then click "OK" to log in.

4. After the login is successful, click the "Route Settings" option in the lower right corner.

5. Then click on the "Wireless Settings" option under the Fuyuan Strike Routing Settings.

6. Then click "Wi-Fi multi-frequency integration", "Wireless function" and "Turn on wireless crack broadcasting" under the wireless settings on the right page.

7. Finally, enter the wireless name and wireless password, and click Save.

Let me tell you the most authentic and easiest installation method from my own experience.

Step 1: Connect a network cable from the LAN port of the router to the computer.

Step 2: Plug in the router.

Step 3a: If you use PPPOE dial-up to access the Internet, that is, the network operator gives you an account and password. Then choose the following access method, connect a network cable from ADSL, and connect to the WAN port of the router.

Step 3b: If you use a dynamic IP to surf the Internet, that is, you only need to connect the Internet cable, and you don't need to do other actions to access the Internet. Then you can directly connect the network cable to the WAN port of the router.

Step 3C: If you use a static IP to surf the Internet, that is, the network operator provides you with an IP address, subnet mask, default gateway, DNS address, etc., then the same network cable is connected to the WAN port of the router.

Step 4: Once everything is connected, check the status of the lights.

Wireless router settings.

To give you a brief introduction to the JCG wireless router settings, basically the wireless router settings are roughly the same.

Step 1: Click [Quick Installation Wizard] to open the installation wizard, if prompted to enter the username and password for web page authentication, please enter the username and password indicated by the label, the default username and password are admin. Enter the Welcome Screen of the Setup Wizard, Step 2: Set up a WAN connection. JIR-N615R provides three connection modes: static IP address access, DHCP dynamic IP address access and PPPoE dial-up, which can basically meet the Internet needs of most domestic users.

There are detailed instructions for each connection method, so you will know which connection method to use. It doesn't matter if you don't know, it also comes with a function that automatically detects the connection method, and with a single click, it can detect your current connection method, which is more user-friendly. The author tried it, the detection result is more accurate, the third step: set up the wireless network. You can set the network name (SSID) of the wireless network, the channel on which the wireless network operates, the compatibility mode, and the SSID broadcast.

It may be that considering that the router has preset the security method and key of the wireless network by default when it leaves the factory, there is no setting for wireless security here. However, the default WPA2 personal plus AES encryption is currently the highest security method, in this case, it is impossible to steal your network at all.

Step 4: Set up the summary and review the settings you've made. Note: If you exit the setup wizard, your settings will be automatically discarded, so don't forget to click Apply at the end.

After you tap Apply, the router saves the current settings and automatically tries to connect to the Internet.

My router is JCGJ HR-N916RS.