How to install a wireless router in school

Network operators in different regions and campuses adopt different router restrictions, so you can ask your brothers and sisters for details. If you have unlimited wireless routers, you can use it.

How to install and configure a wireless router for campus broadband:

1.The router is connected to the campus network.

Connect the campus network cable to the WAN port of the router, and use the network cable to connect the computer to any LAN port of the router. When the LAN port flashes when the computer is turned on, it means that the computer has successfully established communication with the router.

2.The system is connected to the router.

Turn on the wifi of the computer, search for the default wifi name of the router (the nameplate on the back of the router is written), and connect to the wifi network. The first time you use the router, you generally don't need to enter the wifi password.

3.Go to the gateway page.

Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface. (This interface will pop up automatically for new routes).

4.Set up a way to access the Internet.

Go to the WAN port settings in Advanced settings. If the broadband service requires dial-up, select PPPoE dial-up, otherwise you can choose DHCP to get automatically. To dial up PPPoE, enter the broadband password, and select Automatic connection as the connection mode.

If DHCP is automatically obtained, you do not need to enter this field.

5.Set the wifi name and password.

<> go to Wireless Security in the wireless settings, select WPA2-PSK mode for security mode. Select AES for WPA encryption rule. Set up a wireless network key. The router will automatically restart after setting, please enter a new wifi password to connect.

6.The configuration is complete and you can enjoy the network.

Connect the computer with a network cable, turn on the power, and then open the computer browser, enter it at **, 1,1 will enter the login interface of the router settings, and then enter the username and password of the router to enter the router settings interface (the general default user name is admin The password is also the same), the rest is set up according to the manual, find the wireless settings and set it according to what you want to set up, after setting up, connect your school's network with a network cable, and connect the network cable to the LAN port of your router, Don't get a wan.

The specific steps to install the router are as follows:

1. First, connect the router to the power supply, then plug the network cable into the WAN interface (usually blue), as shown in the figure below, and then go to the next step.

3. Then, after completing the above steps, a dialog box will appear, enter the corresponding username and password as shown in the figure below, and then proceed to the next step.

4. Then, after completing the above steps, open the home page, the second option on the left menu bar has a [Setup Wizard], manually click this option as shown in the figure below, and then enter the next step.

5. Subsequently, after completing the above steps, click Next - select the first item [Let the router automatically choose the Internet mode], as shown in the figure below, and then enter the next step.

6. Then, after completing the above steps, enter your [Internet Account] and [Internet Password], which is the account and password given by the operator when you open the network, as shown in the figure below, and then enter the next step.

7. Then, after completing the above steps, set the basic parameters and security password of the wireless router: the wireless status is [On], the SSID is the account displayed on the wireless network, click OK after setting, as shown in the figure below, and then enter the next step.

8. Finally, the setup of the wireless router is complete, as shown in the figure below. In this way, the problem is solved.

Hello, you said there is only one network cable? Can this be connected to the Internet with a network cable? If I can access the Internet, I suggest you buy a Huamei A1 router, plug in this router with a network cable to launch a wifi wireless network, and your mobile phone can receive Internet access.

You have to buy a cat for the router, and then connect the ** cable and you can use it.

3G wireless router, you are talking about wireless broadband or 3G Internet access, if it is wireless broadband, it is recommended to buy a portable wifi, this kind of available router does not have.

Open a classroom desktop, click Start Run Enter cmd in the DOS window and enter ipconfig all to view the IP gateway DNS and other information In order to avoid IP conflicts with other machines in the classroom, do not use the IP you see, you should deviate from it, for example, the last digit of the IP you see is 100, the classroom computing is 50, the last digit of your IP is copied by the gateway DNS after 151, and it is OK to set it to the wireless router First use your laptop or the computer in the classroom to connect to the network cable After automatically obtaining the address, start running Enter ipconfig all to view the IP gateway dns and then connect to the router to set it up If you haven't bought a router, it is recommended to you Tengda's W311R, which comes with an installation CD, and it is good to install and set up the network with one click with the CD.

Go to the physical store and buy a wireless router and ask him to teach you how to use it. If you don't get it back to school, you can still call him and ask, that's how I got it.

There is a special interface on the interface of the router, which is connected to the school network cable, in the connection of the power supply, start the route, the computer connection route, enter the routing account password in the computer browser is admin, and the point setting guide is done step by step without changing (as long as you enter the network account password). The wireless routing item can be enabled by selecting Yes as needed.

It's very simple, go to Taoba to buy a wireless router, the cost-effective Mercury, the slightly better TP-link, D-link.

There is a manual when you buy it.,Just follow the instructions above to set the wireless password and SID (network name).。。