How to check the room suitable for marriage?

The layout of the wedding room should be one and the same.

Generally speaking, the elders in the family will decorate the largest room in the family as a wedding room, in fact, the area of the marriage room should not be too large, it is best not to exceed 25 square meters, nor can it be larger than the hall, this is because if the bedroom is too big, the atmosphere of the home is easy to fade, and the relationship between husband and wife is easy to cool, discord and disputes. On the contrary, the gathering of qi is the love of husband and wife. At the same time, the marriage room should not be too small, if the size is too depressing, the couple living in it is too depressing, which will have a negative impact on the body and mind.

The layout of the wedding room should be suitable and taboo.

According to Feng Shui, the bedroom door should not be facing the entrance door, which is not only not conducive to the protection of the owner's privacy, but also easy to lead to quarrels at home. The bedroom door can also face the other door, if there is no way to change the direction of the door, then put a blessing on the door.

The layout of the wedding room should be suitable and taboo.

There are many owners who love to raise fish at home, but the marriage room is not suitable for placing fish tanks, although raising some fish at home can add more vitality to the home, but how to accidentally break it, it will lead to a ruin. If you really like fish, then raise them in the hall of wealth, and preferably Kujo.

The layout of the wedding room should be suitable and taboo.

It is best to choose a square room as the wedding room, rather than a long and narrow room, a square room gives people a feeling of openness, which is beneficial to the body and mind. There should not be too much furniture in the wedding room, just enough. It is best to place the marriage bed against the wall, which is more space-saving and conducive to ventilation.

In addition to one point, it is also very important that we do not use too much red when decorating the wedding room, although red is festive, but a large area of red will have an adverse impact on people's body and mind. The above is the relevant sharing about the layout of the wedding room, if you have more questions, you are welcome to continue to pay attention to Qijia information.

This can do some feng shui, help you take a look, and then just put it on the line.

…,Small,灬,Bu Demin's quality is really high,Listen to the class, thank you Factory ng Xiaointo。

Walk around the room with something that picks up a signal (a radio or something), and if it's interfered with it, it's pretty much there.

This requires the use of specialized instruments, because most monitors use wireless waves to transmit surveillance images. And, of course, transmission over the line. If you feel that someone has set up a monitor in the room.

You can turn to the police. There is 1 small method. Put 1 computer in your room.

If there is a monitor in the room that uses wireless waves to transmit images, the computer screen will fluctuate.

The way it fluctuates. You're next to the computer. There will be when someone calls you **. Try it.

Call your phone directly, walk around, and pay attention if there is noise; Finish.

I'm on the Internet, and every time someone calls me, there will be noise from the stereo.

Or it might be better with the radio, absolutely, haha.

Look out for some hidden places, like the inside of the flower beds, the corners, etc.

...Monitor ?..It's hard to get a needle.

You can check if there is any abnormality in the placement of items in this room. Or look for it in some places where items are densely populated.

If it is used on the premise of legally collecting evidence to protect your legitimate rights and interests, I can help you.

You can turn off all the lights at night and see if there's a place that's on, and if there is one, it's a monitor.

Close the windows, turn off the lights, and look for infrared probes. Pinholes are difficult to find, and it is necessary to look for mutilated holes in all objects. For example, a painting with eyes on the painting, and the eyeballs may have pinholes, look closely. Something like that, and so on! Watch out for the little black dots!

Turn off all lights, as well as controllable light sources, keep the place you want to detect as dark as possible, take out your phone and take pictures of various places in the room, if you find a small red dot on the **, it may be a camera, because some cameras are infrared-sensing.

If you start a fire in the house and someone comes, it means that there is surveillance.

Buy an instrument and test it.

Or you can look for it and look everywhere you can see.

Unplug all electrical equipment first, and then check it step by step

First, use the elimination method to rule out whether the household appliances are leaking, that is, unplug all the plugs and try to send the power once.

If the leakage can only be checked by an electrician instrument, first determine which line is leaking, or which two wires are short-circuited. The method is as follows, and the only way to check leakage is to use a resistance meter or a multimeter. The following tests are done.

Check the short-circuit live wire and neutral wire to measure the insulation resistance, check the grounding live wire to the ground wire insulation resistance, and check the neutral wire to the ground wire insulation resistance.

Knowing which line is leaking, we are using the segmented search method to gradually reduce the scope of the fault.

Generally, it is in the wiring part, the open wire bending part, and the socket part.

You can take a look at the socket first, and if it's good, it's okay. If it's a problem with the line, the home is generally a dark line, and the line is not easy to repair.

You can also remove all the household appliances, if you still jump, there are two possibilities "1" line has some leakage If it is a bright line, you can go to the place where the wire is sold to buy a digital display pen, whether you buy it with a battery or without a battery, it has a total of two buttons, one directly measures the voltage, and the direct contact measurement can be; The other is indirect voltage measurement, which can be said to be inductive voltage measurement, that is, the voltage measurement is measured through the insulation layer, if there is no electricity in the live wire ** socket, if it is a zero line segment, there will be voltage at both ends of the socket, which is 220V

2》Poor contact with the zero line.

If it's not a problem with the wire, it's a problem with the electrical equipment, you can try it one by one, and see what the plug is wrong with before trying...

Immediately after that, it will be sent to the appliance repair office.

First of all, check whether the remote control is normal, use an Android phone, turn on the camera, use the camera Bipei head to the front end of the remote control, press the on/off key, and the infrared light inside will be seen in the mobile phone, which is invisible to the naked eye, which is the normal Yinhui segment. If the remote control is normal, there won't be much you can move!

The network is the number one killer of HC, teach you how to check the room IP method. Everyone knows that it is possible to enter the room of the American server in the Asian server, and it seems that the delay is green and the play is very smooth, but the low latency does not mean that there will be no packet loss, and it is often a matter of packet loss that will last forever, So for the sake of insurance, it is better to choose to play in the Asian server room as much as possible, So how to check whether the room you enter is Asian or American, it used to be based on feelings, low latency is Asian, high latency is American, in fact, this is unscientific, and there are many rooms in American service that are low latency. Here's a 100% correct way to look at it:

First Ctrl+Alt+Delete or right-click the taskbar to enter the Task Manager, click Resource Monitor, select Network, and then click Diablo3 to see that there are 4 links below, IP 206 starts with the US server, 182 starts with the Asian server, as long as both IPs start with 182, then congratulations on entering the Asian server room. If it's an XP system, you can use the 360 Network Connection Viewer to find Diablo3 and also see if the two IPs start with 182 If you successfully enter, don't retreat, now Blizzard doesn't know what restrictions have been made, and it takes more than 10 times to brush out the Asian server once, and you will have to do login restrictions in the future, which is even more tragic.