Why does the ink cartridge have to be replaced when the HP is used for a period of time, when the pr

1. After you say that after clearing, it still doesn't work, then it is recommended that you change the cartridge.

Because I recently used a domestically compatible HP ink cartridge, after installing the supply, it has been very easy to use, and the black effect of the 816 is comparable to the original (although I have printed nearly a thousand copies with it), and the effect of the 817 is average because of the change of supply, so I don't have great hopes, and the general use is enough.

2. HP's printer is absolute, you can rest assured, my old-fashioned 3938 has been used for 4 years, there is a problem with the ink cartridge, and everything else is great, you have to believe in the quality of HP.

3. I analyze that the problem of your cartridge nozzle is that you have a problem during installation, you must strictly follow the installation requirements of the disc, I have failed before, but after groping, I found that those steps must be strictly followed.

Hello! You are welcome to choose an HP printer! It is recommended that you do not use compatible consumables, because compatible consumables can easily cause damage to the printer and increase the failure rate; And printers that fail because they use compatible consumables will lose their warranty eligibility; Therefore, it is recommended that you use original consumables.

One cartridge is too little to beat 2,000 Zhang Ni, but it is inkjet.

The continuous supply is easy to block, cut off the ink, and it is easy to have problems, which is the fundamental reason why your print head is easy to break. It is recommended that you use refill cartridges instead.

Hello, it's an honor to answer your question Original Answer: Refuse to plagiarize, the correct answer is to supply continuously, so that the cartridge lasts longer. But the HP DeskJet 1000 is a real hassle. Therefore, if you plan to add a supply, HP's machine is not recommended, and Epson is recommended, followed by Canon.

There are many reasons for the scrapping of ink cartridges: 1. The production defects of the ink cartridges themselves are caused. 2. The use of external supply leads to scrapping of the stuck head.

3. The printing time is too long. 4. The ink cartridge is broken or the intake air is roughly burned out. 5. Ink overflow leads to burning.

6. The counter is full, and it will automatically fuse, etc.

In the end, there are more than 456 kinds of phenomena, and 6 is the calculation of the counter is caused by the comprehensive influence of the number of clamps, the number of times the upper cover is lifted, and the number of times the cartridge is cleaned.

If you print continuously, dozens of hundreds or more per day, you can consider continuous supply, low cost, but if it is a few prints per day, then the original ink printing, the effect is better and the printer is more durable.

The cost of reconnecting will be much lower than replacing the cartridge.

Summary. Dear, don't worry about it, the teacher will help you take a look, generally speaking, you can use it again after adding ink, 1. The printer is full of ink and prompts that there is no ink because the printer counts to obtain the ink volume is an estimated value, and in actual use, it may cause an error with the actual ink volume due to some operations, and the amount of ink obtained is through the chip on the ink cartridge. 2. If you want to fill the ink cartridge, after filling, you should unplug the ink cartridge and reinstall it according to the prompts, so that the ink cartridge counter can be reset automatically before it can be used normally.

In addition, if you are using a modified continuous supply cartridge, you need to press the zero button on the built-in cartridge to perform the reset operation before you can continue to use it.

Dear, good afternoon, don't use it anymore if the cartridge is empty, dear dear, it will cause damage to the machine, it is not recommended for dear to use it, love you. <>

Honey, so if the cartridge is empty here, it is still not recommended for honey to use it. It is easy to cause Namin blockage during the operation of the machine, causing damage to the machine, and it will have to be repaired at that time. So my dear, you'd better not use it, love you.

Isn't it okay to fill ink with an empty one?

Dear Hewlett-Packard, headquartered in Beijing, has set up nine regional headquarters, 28 city offices, 37 support service centers, more than 200 gold service outlets, two factories, a global software development center, a global operation support center, and HP Business School, HP IT Management School and HP Software Engineering School, with more than 3,000 employees.

That's okay, oh honey, it's good to use the ink.

But the display is not already.

Dear, don't worry about it here, Mr. Dayu will help you take a look, generally speaking, after adding ink, you regret that the imitation fiber can be used again, 1. The printer is full of ink and prompts that there is no ink because the printer counts to obtain the ink volume is an estimated value, and in actual use, it may cause an error with the actual ink volume due to some operations, and how much ink imitation water is obtained through the chip on the ink cartridge. 2. If you want to fill the ink cartridge, after filling, you should unplug the ink cartridge and reinstall it according to the prompts, so that the ink cartridge counter can be reset automatically before it can be used normally. In addition, if you are using a modified continuous supply cartridge, you need to press the zero button on the built-in cartridge to perform the reset operation before you can continue to use it.

HP inkjet printers are not suitable for changing the ink supply, and they are unstable even if they are changed. Only the cartridge is replaced.

Maybe it's because the printer itself prints fast, and it can't even supply water.