Why did the second string sound of my guitar change???

Guitar second string sound changes can be caused by a variety of reasons. Here are some possible reasons:

1.Wear and tear of strings: Strings wear out during use, which can cause changes in pitch and timbre. If the string is badly worn, it may need to be replaced with a new one.

2.String tightness: The tightness of the strings also affects pitch and timbre.

If the strings are too loose, the pitch may be lowered and the timbre may become dull. If the strings are too tight, the pitch may rise and the timbre may become sharp. Therefore, the tightness of the strings needs to be adjusted regularly.

3.Problems with string reels: String reels are an important part for adjusting the pitch of strings. If the string reel is slippery or other problems, it can cause pitch inaccuracies or timbre changes. At this point, the reel needs to be repaired or replaced.

4.The problem of the fixed string: The fixed chord cone is an important part of holding the strings in place. If the string cone is loose or not in the correct position, it can cause pitch inaccuracies or timbre changes. At this point, the chord cone needs to be re-fixed.

To sum up, the guitar second string sound variation can be caused by a variety of reasons. In order to find out the specific cause of the problem, detailed inspection and testing are required.

There are generally 4 types of diacritics:

1.If there is a problem with the string, such as wear and tear, etc., which causes the pitch of the string to change, this kind of string needs to be changed. Obviously you're not.

2.There is no tuning. I don't know if that's the case for you, and I don't know if you can tune it, but you have to try to tune the 2-string back on your own. The specific operation is to press 3 strings and 4 frets, play 3 strings and 2 strings, if the sound of playing is the same, it means that it is tuned.

3.The string reel had problems with slippery wires. I don't know if that's the case.

It is recommended that you use the second method before considering the third case. To do this, play the 2-string reel and twist the 2-string reel at the same time. If there is a pitch change and the pitch remains the same after you no longer twist the winder, the coiler is good.

The opposite is ......You know that. To repair the winder, tighten the screws.

4.There was a problem with the bridge connection. If the guess is correct, what you bought for more than 300 should be an acoustic guitar, and it's a ballad, right? If there is a problem with the bridge at the end of the xylophone strings, it is usually all the strings that have run out of tune and are scrapped. This should not be the case.

Maintenance: Folk and electric guitar strings will rust, classical is nylon. Therefore, preventing rust is generally the main way to maintain the strings.

The professional operation is to rub the rosin. If you can't afford it, or don't want to buy it, wipe every string with a clean, dry cloth after each play, and often when you're not playing. (It mainly depends on where you are, if the humidity is heavy, then the frequency of rubbing should be higher.)

In fact, the best way to maintain your strings is to play more.

The question is a little bit detailed, will it be a hit or something? Try what strings to use, usually maintain, take a piece of cloth and insert it after practicing, because there is sweat on your hands, and it is easy to perish if you don't plug it.

Summary. Hello dear Erhu after the string change is normal for the sound to become noisy, because the new string has not been pulled, the sound is not good, it is normal to pull more after the string change, practice every day, the string is ripe, there will be no noise. In addition, it is important to see if your storage environment is too humid or too dry, as it is easy to change the sound if it is stored properly.

Erhu noise refers to the physical phenomenon of disharmony in the process of resonance and resonance. The common causes of erhu noise are analyzed as follows: 1. Factors in design layout

Some pianos do not form a resonance focus area in the barrel, the sound is scattered and unfocused, the bass is thin, the treble is weak, and it is easy to make noise. Some pianos have a backward focus area, which is prone to high pitch and void sound, resulting in noise. Some of the effective strings are short, the string vibration range is narrow, the frequency is high, and it is easy to make noise.

Hello dear Erhu after the string change is normal for the sound to become noisy, because the new string has not been pulled, the sound is not good, it is normal to pull more after the string change, practice every day, the string is ripe, there will be no noise. In addition, it is important to see if your storage environment is too humid or too dry, as it is easy to change the sound if it is stored properly. Erhu noise refers to the physical phenomenon of disharmony in the process of resonance and resonance.

The common causes of erhu noise are analyzed as follows: 1. Factors in the design layout: Some pianos cannot form a resonance resonance focus area in the barrel, the sound is scattered and unfocused, the bass is thin, the treble is weak, and it is easy to make noise.

Some pianos have a backward focus area, which is prone to high pitch and void sound, resulting in noise. Some of the effective strings are short, the string vibration range is narrow, the frequency is high, and it is easy to make noise.

2. Factors in the production process: some pianos are not tightly structured, and the defects of the wood such as cracks are not treated well, resulting in the noise of "breaking penny" effect. Some piano skins are tight, the thickness of the skin is uneven, the tension around the skin is uneven, the internal stress is not eliminated, the resonance effect of the skin is poor, and there is noise in the treble and some notes.

The verticality and concentricity of some pianos are not standardized, the resonance is not coordinated, and it is easy to make noise. 3. Factors in the materials of the violin: Some pianos have defects that cannot be repaired or remedied, such as knots, cracks, decay, etc., which affect resonance and produce noise.

Some piano skins are of poor quality, such as insufficient tension and elasticity, and are prone to noise. Common thin-skinned violins are the most noisy.

from external reasons and internal reasons.

Two aspects to analyze:

External reasons: 1. The difference in subjective appreciation of human complexion. There is a big difference in the subjective judgment of **, a new erhu, the sound is transparent and clear, some people may think that it is too thin and does not have the charm of erhu.

2. Differences in performance techniques. The difference between the same erhu, played by professionals and amateurs, is obvious.

3. The difference in the quality of erhu grades.

Internal reasons: 1. The new erhu has not yet "opened the tone", the protein fibers inside the python skin have not been "softened", and the harmonious resonance between the barrel and the stem has not been achieved. The method of detecting the opening tone: pull the empty string and listen to whether there are more than 100 tones, similar to the reverberation of singing karaoke, of course, it will not be as obvious as karaoke.

2. Piano saddle. Carefully select the saddles that are suitable for this erhu, and you can't copy what yards others use, and even change different yards in different seasons and temperatures, so you have to carefully identify and select them.

One possibility is that the erhu has not pulled the snakeskin for a long time, and it will be damp, which has little to do with the strings. The best thing to do is to pull it for a while and it should be back to normal.

Another possibility is that the timbre is not right due to the lack of tuning, is it tuned with a tuner for the new strings?

The third is the problem of the yard of the erhu snake skin, either the strings are not in the groove, or they are aging.

Hopefully my suggestion will help.

Excuse me, I haven't pulled it for a long time, I haven't loosened the strings, and I haven't been damp, I've dried it and tried it, the key to the erhu timbre is still on the leather, the wood doesn't matter much, and it may be that your strings are not good, find a professional to give it to you, the tone is accurate, and in the end it may be a matter of not pulling for a long time.

The reason why your erhu is so good and super ugly this time is that you haven't played it for a long time, and you want to listen to it and restore the original timbre, only if you pull it every day, it may be restored in half a month. The new strings have something to do with the unpleasant sound, but it's not much. There is no tension in the new strings, just pull it for a while.

It may be that the strings are not in tune, and then it has not been pulled for a long time, so it is good to pull it.

Reinstall the inner and outer chords once, with a strong load, not loose

I haven't pulled it for a long time, and the sound is not good, which is the root cause.

It doesn't have much to do with the strings.

It's that your piano has been sitting for too long, so now it's good to take it out and practice it often.

Do not worry.

Yes. It's related.,You can attach a tuner to try.。。

After changing the guitar strings and tuning it, why does the sound still feel different from before?

After changing the guitar to a string and tuning it, the sound feels different from before for the following reasons: Generally speaking, the requirements for the strings of the practice piano are not very high, as long as it can be matched with the upper model. But it's not just a simple matter of buying a string for a string, if you are pursuing a little thinner, you should pay attention to how big the diameter of your string is when you buy a string, first of all, the diameter must be matched with the diameter of the original string, so that the sound quality will not have much impact, and then the metal composition of the string is also very important, and the percentage of alloy in the book will affect the sound quality of the guitar, but this will not have much impact on the practice piano.