What happens when the refrigeration temperature of Haier refrigerator BCD 220WDVL keeps jumping?

Generally, if you encounter such a problem, there is a problem with the probe of your sensor. We just need to take the probe out. See if there is any water that has been ingressed. Just clean it.

In this case, his computer version should be faulty, and in this case, his computer version should be replaced, which is his computer circuit board, and only then can it.

The temperature of the refrigerator keeps jumping, it may be that the refrigerator has been filled with something too hot, the temperature has been unstable, or there may be too much food in the refrigerator.

If the refrigeration temperature of Haier refrigerator VCD-820WD YL keeps jumping, then you can set it yourself, if this is still the case, call the maintenance master to help you overhaul it.

If this situation is a computer version failure, it is likely that the display is a failure or a computer version control failure, both of which are entirely possible.

The temperature of the refrigeration has been jumping, it should be that he has just opened the store, or your clerk has just plugged it in, so there is such a situation.

In the non-locked state, press the freezer adjustment and artificial wisdom keys at the same time for 3 seconds, and the lock icon will be displayed to enter the locked state. When locked, press the freeze adjustment and artificial wisdom buttons at the same time for 3 seconds, the lock icon disappears, and the lock is unlocked, and the following settings can be made.

2. Artificial intelligence (if you choose the artificial adjustment method, this item can be skipped).

When the ambient temperature fluctuates greatly, artificial intelligence can ensure that the refrigerator works properly on its own.

The reason for this problem is: the temperature of the ice tank is set incorrectly, and the temperature is set to Zhizhi

It can adjust the temperature, that is, DAO can be. The details are as follows:

1. In the first version of the step, click the function to select the button to wake up the refrigerator screen, see the figure below, go to the steps below.

2. In the second step, after performing the above operations, you can adjust the temperature of the freezer compartment of the refrigerator, and then click the temperature to lower it by one degree, see the figure below, and go to the steps below.

3. The third step, after performing the above operations, click the refrigerator temperature adjustment button in the upper right corner to adjust the temperature of the refrigerator, see the figure below, go to the steps below.

4. In the fourth step, after performing the above operation, press the refrigeration button once, and the temperature will be reduced by one degree, see the figure below, go to the following steps.

5. In the fifth step, after performing the above operations, press the function button twice in a row to start the intelligent temperature mode of the refrigerator, which can intelligently adjust the temperature according to the number of items, as shown in the figure below. In this way, the problem is solved.

Haier refrigerator bai adjust the temperature du

Haier refrigerators are generally divided into two types, zhi

One is a mechanical DAO

One is artificial intelligence. The mechanical format requires manual adjustment of the temperature weight.

degree, open the refrigerator, you will see that there will be a circular rotary switch in the refrigerator room, which is marked with the number 0 to 7, 0 is not working, the larger the number, the stronger the refrigeration, 7 is the highest intensity refrigeration, as long as you rotate the button to adjust the temperature, generally 1 3 gears in summer, 3 4 gears in spring and autumn, 4 5 gears in winter.

Haier refrigerator of artificial intelligence generally defaults to intelligent temperature adjustment,You don't need to set it yourself,If the artificial intelligence is not turned on,In the non-locked state,You can press the artificial intelligence key on the refrigerator panel,It will appear,Icon e will be displayed,The refrigerator enters the artificial intelligence state,Press the smart key again,Icon e disappears,The intelligent adjustment state exits。

The artificial intelligence of Haier refrigerator can also be manually adjusted,Non-locked、Non-artificial intelligence state,Press the refrigeration adjustment button,The panel will display a flashing iconF,After that, every time you press the refrigeration adjustment button,The temperature drops1,Until 3,Press it again7,The temperature can be changed between 3 and 7,No button will be set within 5 seconds after operation。

The same method is also taken for freezing temperature adjustment, but the button is changed to the freezing adjustment key, the flashing icon is h, and then every time you press the freezing adjustment key, the freezing setting temperature is reduced by 1 until -22, and then press the freezing adjustment key, the freezing temperature returns to -15, and the temperature can be changed between -15 and -22.

It may be that there is a problem with the temperature probe of the refrigerator, or it is a random jump caused by the temperature you set is not locked, and you need to look at the instructions on the manual to adjust the temperature to see if it is the reason why you have not adjusted it well.

Thermostat leakage, right, you can see for yourself.

Check if the sensor is broken.

Over-temperature alarm, that is, the temperature of the freezer compartment of the refrigerator has not dropped; The temperature of the freezer is reduced to minus 8 degrees left.

The right will automatically exit the alarm state and will not be flashing.

Because you are a new refrigerator just powered on, the temperature of the freezer has not dropped, so there is an overtemperature alarm, which is normal; If the refrigerator has been used for a period of time and flickering, the refrigerator is broken.

Refrigeration direct refrigeration circulation system Although the single cycle is electronically controlled, it is still a single cycle refrigeration system, that is to say, refrigeration and freezing are the same refrigeration system, and the temperature of the refrigeration room and freezer is controlled by the refrigeration head, and the temperature of the freezer cannot be adjusted by itself, but according to the temperature setting of the refrigeration. As winter approaches, the temperature of the refrigerator is getting closer and closer to our ambient temperature, resulting in refrigeration basically does not need refrigeration, and the freezing temperature will not meet the requirements. When the ambient temperature is lower than 16 degrees, turn on the winter temperature compensation switch (if you are not clear, refer to the manual), and the temperature of the freezer will return to normal.

You can read the instruction manual, which should be described in detail. A general number flashing indicates that it is in the state of adjustment.

Hello, thank you for asking the company.

Isn't the pro not setting the temperature? The status to be set is flashing, and you are welcome to ask the company again.

We wish you a happy work life

Hello, dear, very happy to be able to model for you to answer! Here's the answer, check it out! First of all, check whether the power supply of the refrigerator is normal, after confirming that the power supply is normal, you can check whether the refrigerator condenser is blocked, if the condenser is blocked, you can unplug the condenser and clean it; If the condenser is not blocked, you can check whether the temperature sensor inside the refrigerator is faulty, and if it is faulty, you need to replace it with a new sensor; If the temperature sensor is not faulty, you can check whether the internal controller of the refrigerator is faulty, and if it is, you need to replace it with a new one.

Your questions have been answered! I hope to be able to help you, if there is something wrong, you can continue to consult, bear with me!

What is the reason for the non-stop jumping system of Haier refrigerator BCD-290W?

Hello, I'm here to answer for you. What is the reason for the alarm on the display screen of the Haier refrigerator BCD-290 series that you are asking, sometimes it is one, and sometimes it jumps around. For Haier refrigerator BCD-290W, eliminate the alarm on the display screen, and directly cut off the power of Zhaotan. Refrigerators often alarm, and there are three main reasons for refrigerator alarms:

First, the door was not closed and touched, and the door switch was not pressed. Second, whether a large amount of food is put in before the alarm, and the alarm will also occur when the food with a high temperature is put in, which is a normal phenomenon in the refrigerator. 3. The program in the display board may be subject to external electromagnetic interference, as long as it is not a frequent alarm, there should be no problem.

How to adjust the temperature of Haier BCD 222KSW refrigerator, the numbers on the freezer screen keep flashing.

Hello dear, the steps of Haier BCD-222KSW refrigerator temperature adjustment are as follows:1Open the refrigerator door and locate the temperature control panel, which is usually located on the top or side of the interior of the refrigerator.

2.Press the "Refrigerated" or "Frozen" button so that it displays a number. 3.

Use the "+" and "-" buttons to adjust the temperature and lower the temperature appropriately. Generally, the refrigeration temperature should be 2-8 and the freezing temperature should be around -18. 4.

After waiting for a few hours, check that the temperature has reached the desired temperature, and if you need to adjust, you can repeat the above steps again to adjust. If the numbers on the frozen screen keep blinking, it could be due to a malfunctioning temperature sensor or other issue. It is recommended that you contact the after-sales service center for repair or replacement with delay.