What should I do if my router crashes? What should I do if my router gets stuck?

1.Check whether the environment is ventilated, if the heat dissipation is not timely, it will cause a crash. 2.

Check for infection with viruses, such as ARP virus. 3.On the configuration screen, "Advanced Settings" and "Advanced Network Settings" are activated to "Ignore replies from wan ping".

4.Reset, reset the router. The router is often disconnectedSolution 1

Confirm whether there is any problem with the external line, and whether the modem will be disconnected if it is not connected to the router directly; 2.Check whether the PC is infected with viruses, if so, please deal with it as soon as possible; 3.Check whether anyone is using BT, or Thunderbolt, eMule and other P2P software in**, if so, it is recommended to try not to do ** whether it can be stable.

It is estimated that the router is overloaded, there is a problem with heat dissipation, the router I use is a long-term work for a period of time and then it crashes, and it can be restarted after power failure, it should be a heat dissipation problem.

Turn off the firewall and DHCP of the router, set a fixed IP address, reduce unnecessary resource consumption, and let the CPU concentrate on routing and exchanging data.

You can log in to the road tour from the inside, restart the road game from the computer, and others are not afraid when they are not at home, of course, it is best to spend 100 yuan to change a new road mail to try!

1. Reboot. 2. If it doesn't work to restart, the power will be cut off and try again.

Change the local connection to automatically get an IP address.

When the wireless router is plugged in, do not connect the "modem" (modem) first, reset the wireless router (restore to the factory), connect the computer to any "LAN" port of the wireless router, enter the settings page, and set it according to the PPPoe (ADSL virtual dialing) method. Then set it up again.

What to do if the router is stuck.

What to do if the router is stuck.

What exactly is the shape of the router that can still be stuck, is it that the flash indicator has been stuck and does not move? I really haven't seen what state the router is stuck? Is it too hot?

Led to burning. If it really doesn't work, just buy a new one, usually restart the power off process. There is no other way.

1. The router is disconnected

1.Check if the terminal PC appreciates the virus.

2.Check whether there are behaviors that occupy a large amount of traffic in the LAN, such as using third-party P2P software such as BT, Thunderbolt, and eMule, or whether there are ****** in the LAN and other behaviors that occupy high bandwidth'Behavior.

3.There is a problem with the device itself or the firmware version is too old.

2. The router crashes

1.Check whether the router is ventilated, if the router does not dissipate heat in time, it will also cause the router to crash.

2.Double-check your LAN or computer for ARP viruses or other similar viruses.

3.The router itself has a hardware quality issue. We all know that routers, like computers, have hardware configurations such as CPU and memory, and if the quality of these hardware is not up to par, it will also lead to crashes.

4.The number of LAN belt units is too large, which exceeds the load range of the router itself.

Third, whether the router crashes or disconnects

1.Upgrade the firmware of the router;

2.Place the router in a ventilated place or a place with good heat dissipation so that the router temperature can be maintained at a reasonable level.

3.When buying a router, you must choose the right brand, and you must not start with a miscellaneous router.

4.Proper router settings will greatly improve the performance and reliability of the router itself.

Router Panic Resolution:

First of all, check whether the environment where the router is placed is ventilated, if the heat dissipation is not timely, it will cause a crash;

Then check for infection with viruses, such as ARP virus;

The router is often disconnectedSolution:

First of all, confirm whether there is any problem with the external line, and whether the modem will be disconnected if you do not connect to the router directly;

Finally, in the Tools Other items of the route management interface, enable ignore ping from the WAN and enable DOS protection, reset the device, or upgrade the software.

Then check if the PC is infected with a virus, and if so, please deal with it as soon as possible.

Meaning of router:

The router is used for routing services and is used for Layer 3 traffic selection.

The main job of the router is to find the best path through each host package of the router and efficiently transmit the data to the destination site.

A router is a device that connects various local area networks and wide area networks on the Internet, and it will automatically select and set routes according to the situation of the channel, and send signals in the order of the best path.

A router is the hub of the Internet"Traffic police"。At present, routers have been widely used in all walks of life, and various products of different grades have become the main force to realize the internal connection of various backbone networks, the interconnection between backbone networks, and the interconnection between backbone networks and the Internet.

Unplug it, plug it in, and it reboots.

If there is a problem with the system, then find a hole or button to reset, press it for a few seconds, and then let go and reset it.

Router factory reset There is a small hole in the back of the router Just press and hold it.

Wireless routers often crash Reasons:

Reason 1: Router setup problem, reset router, reset dial-up.

Method: There is a button [RESET] button on the back of the router, press and hold for 5 seconds, and the indicator light on the router panel will be off and then on, which means that the setting has been reset.

Set up router dialing:

The IP and DNS settings of the computer are automatically obtained.

1. Open the browser - enter the general router address is this or view the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

2. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter your Internet username and password according to the prompts, and save.

3. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

Reason 2: Router hardware is damaged.

Workaround: Replace the router with a new one.

First of all, check whether the crystal plug of the network cable is loose, click on the computer, and then open the device manager, and find the network adaptation.

If the orchestration point is deactivated and restarted, it may be fine. If not, don't be angry!

It's a hot summer, the temperature is high, don't you feel hot? Devices (devices are: cats, routers, network switches, Hubble, computers, etc.) also feel hot and can't work; You may wish to refer to the following methods and adopt measures that you feel are acceptable to reduce the temperature of the working environment of the equipment.

A: Users who often surf the Internet for up to half a year should open the shell of the device after the power is off and clean up the dust in the device.

b: Place the equipment in a safe place for people, open the lid of the equipment, and use air convection to strengthen the contact surface with the air for natural heat dissipation;

c: Install a micro fan to the equipment to increase the convection of air and force heat dissipation;

D: If you are doing IT, I suggest that you install a heat sink on the heating part of the device after disconnecting the power supply.

e: After the equipment is disconnected from the power supply, use a 3mm drill bit to drill many holes up and down the equipment to strengthen the air convection flow and improve the heat dissipation conditions;

f: To ventilate and dry the equipment, it is best to make an insulating bracket to support the equipment for natural heat dissipation;

H: Let the adsl cat sync first: power off the cat and restart it.

I: The software settings are reasonable, so that 3 do not install: do not install informal software, do not install P2P software, and do not install uncommon software. Turn off all unnecessary internet connections, such as Thunderbolt.

BT donkeys, etc.;

j: Optimize the network.

Personally, I recommend using some gadgets.

For example, super bunnies, etc.

k: The computer should have at least one valid antivirus software installed.

l: NIC problem: The NIC bandwidth is appropriate and the operation is stable.

As long as you do a good job in the above aspects, your failures will be eliminated;

Thank you for adopting my answer!

Thank you: friend!

The indoor voltage is unstable, and then there is a problem with the power supply of the router, and this phenomenon is also to restore the factory settings.