Oris official after sales service center address

Chengdu Famous Watch Repair and Maintenance Center: Room 2405, SAC Sichuan Aviation Plaza, No. 6 Renmin East Road, Jinjiang District, Chengdu.

With the concept of quality assurance and integrity management, all employees have undergone professional training, excellent technology and rich experience, to better serve businesses and customers, we adhere to the "customer first, attentive service, integrity management" for the purpose.

Address: 2208, 22nd Floor, Fuer Building, East Third Ring Road, Chaoyang District, Beijing, and since its opening in Standard Time in 1883, Tiffany & Co. has taken on the mission of routinely adjusting more than 400 home clocks for its customers each week.

It is recommended that you can open the warranty copy attached to the purchase form, under normal circumstances, there will be a service address on the warranty copy, or find a formal service center for testing and maintenance store address, etc., if there is a professional after-sales maintenance center nearby.

In order to ensure the proper functioning and accuracy of your watch, we recommend that your watch be serviced regularly.

The watch is tested for water resistance and cleaned once a yearWatches with mechanical movements are serviced every 2-5 years. This not only keeps the watch in good running condition at all times, but also effectively extends its service life.

However, the above warranty service is only applicable to watches under normal wear conditions, and does not include watches that are worn abnormally or subjected to constant shocks.

If you still have any questions or what happens to your watch, please contact the official customer service below. This makes it quick and easy to find an Athens after-sales center.

The failure of the watch is generally due to the insufficient battery of the quartz watch, the insufficient kinetic energy of the mechanical watch, or the water into the watch and the bumping of the watch, it is recommended to go to the maintenance center for testing, because if it is a quartz watch, the battery will be out of power for a long time and will cause leakage and corrode the movement.

Since the hands are installed in layers, and the top tube is connected to the second hand, the second hand is usually lost. If the hands of the watch are dropped, the crown should be pulled out in time to stop moving to prevent the hands from scratching the watch, dial or breaking themselves. After pulling out the crown, please repair it in time to prevent the watch from dusting.

In general, if there is no damage to the inside of the watch, it is easier to repair, but if the wheel tube is deformed, broken or the parts are worn, the repair will be slightly more difficult. Pay attention to the selection of a regular mechanism to prevent scratching the dial and reducing the waterproof performance of the watch. When installing the watch hands, a thin film is placed on the dial to protect the dial.

After installing the watch hands, a comprehensive waterproof test is required, and the waterproof ring needs to be replaced again if it is aging.

You can go to a regular repair shop to check it.

The watch hands are not gone because the battery is out.

Oris does not currently have quartz watches, 1) Lack of kinetic energy: The watch is not winding enough, and the kinetic energy is insufficient. Automatic watches, in particular, are inefficient and require a lot of arm movements.

When typing on a keyboard, the range of motion of the wrist is too small, and the winding efficiency is very low. If the amount of movement is small, you can use the winding method of the mainspring manually.

2) Gear failure: Eccentric wheel, center wheel failure and other gear train failures will lead to manual stop of the watch. Table stealing can also be caused by the collision of the pallet fork and the fork clamp, the collision of the outer pile or the outer clamp of the swing beam and the balance spring, the deformation of the fork head of the pallet fork and the collision of the impact plate, or the collision of the fork head nail and the disc nail.

These situations are often difficult to spot and require careful inspection and testing to identify and solve problems.

3) Lack of maintenance: mechanical watches, it is best to maintain every 2-3 years or so. If it is used for a long time without maintenance, a large amount of oil sludge will be produced and deposited in it. The friction between the gears increases, which causes the gears to slip.

Hello, glad to answer for you!

Reasons for inaccurate time: insufficient kinetic energy reserve of the watch, insufficient battery of the watch, the watch has been hit or hit by an external source, the watch has not been maintained for a long time, and the watch is affected by magnetic fields.

Solution: It is necessary to go to the after-sales center for testing and maintenance.

If you have any questions, please call** Please feel free to call.

Hello, if the watch hand does not go, it may be magnetized, or it is out of power, and the battery needs to be replaced.

Once the magnetism on the watch is all of a sudden, it goes very fast, even 1-2 hours a day. When wearing mechanical watches, pay attention to keep away from magnetic fields, such as stereos, televisions, mobile phones and other electrical appliances. Magnetization is a relatively common phenomenon nowadays, and the solution is not difficult, just go to the watch repair department or return to the Dangdang watch department for demagnetization, or bring your own demagnetizer, it only takes 30 seconds for the watch to demagnetize, and there is no impact on the performance of the watch.

There is an Oris customer service center on the 11th floor of Block D of the World Trade Center in Central, Chaoyang District, you can go and have a look.

In fact, it is not very strange that dust enters the watch, after all, dust is everywhere in this environment of life.

The main reasons for watches to get into dust:

It's dust before it leaves the factory;

The watch is not well closed, and usually water enters when it enters the dust. The gray leak on the dial does not come from the outside world, but is caused by internal wear and tear.

It is the dust that enters during use.

Therefore, dust entering the watch is usually due to gradual penetration during prolonged wear. If only fine dust is entered, there is no need to clean it without affecting the aesthetics and repurposing it. However, if it is a certain length of dust such as hair or acrylic fibers that enters the watch, it is necessary to pay attention, because this dust is very likely to cause the movement to stop.

There is an Oris customer service center on the 11th floor of Block D in Central, Chaoyang District, where you can go and have a look.

Reasons why the watch is slowing:

1) Insufficient power reserve: You need to check whether the power is sufficient, if the amount of exercise of the automatic mechanical watch is small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of fast and slow.

2) Insufficient power: If the quartz watch suddenly finds that it is slow, it is likely that the battery energy is insufficient, and you can send the watch to a special maintenance point to check the power.

3) Hit or impacted: The watch is very precise, if it is hit or hit, it may cause loose damage to internal parts, and it may also cause time-keeping problems.

4) Need to maintain: the lack of oil in the movement or the wear and aging of the internal parts may cause the problem of running time, which needs to be repaired and sent to the designated maintenance point for maintenance services.

Reasons why Oris mechanical watches don't go: There are many reasons why Oris mechanical watches don't go, such as: bumps, movement gear misalignment, Oris watches are magnetized, shelving for a long time, sludge drying, etc., will cause mechanical watches not to go. Recommendations for the use of mechanical watches:

Hand-wound Oris watches should be wound at the same time every day as far as possible so that the Oris watch has sufficient energy to function over the next 24 hours.

The energy of a self-winding Oris watch** is based on the movement of the wearer's arm, so it does not need to be wound manually under normal wear, except when the wearer does not move enough to replenish the mainspring, it can be compensated by manual winding, and the crown rotation is controlled within 20 revolutions when winding.

For a self-winding watch that has not been worn for more than 40 hours, the Oris crown should be re-worn by turning the Oris crown twenty times to reactivate the movement's drive.

4.To prevent moisture from penetrating the case and to maintain the water-resistance of the watch, make sure that the crown is locked at all times. You can go to [136 Chifeng Road, Heping District - 30th Floor, International Finance Center] for maintenance.

If your watch is disturbed by magnetism and the time is not accurate, you can go to the watch repair shop for help, because there is a step to demagnetize the watch, then why is the watch magnetic, in fact, there are many magnetic fields around us, such as electrical appliances, electromagnetism, sometimes we come home, we may put the watch on the TV, stereo, etc.!

As I said in the first point, the friction between the movement parts of the watch will lose our power, and if the mechanical parts are aging, it will bring a lot of friction, and the watch needs to be brought to the watch store for maintenance.