Why does You can safely shut down appears after XP is shut down???

Shutdown is slow. Optimized with Super Bunny.

End all applications, end all programs in memory.

When the computer is shut down, turn off all programs and shut down again.

Don't load too many apps when you start up.

1. Use the program to shut down.

is a shutdown program, which is saved in the C: Windows System32 folder (C drive is the system disk). Build a quick one on the desktop.

shortcut, right-click and select "Properties" in the pop-up menu. Add "-s -t 10" after the path of the "Target" text box in the properties dialog box, where "-s" stands for shutting down the computer, of course it can be changed to "-r" to restart the computer; "-t" indicates the set countdown time, and the following number "10" indicates 10 seconds. Readers can make changes as they see fit, which greatly reduces the shutdown wait time.

In addition, there is a parameter of "-c shutdown display prompt message", that is, when you want to shut down, the system will pop up a message showing your own settings, note that the shutdown prompt message cannot exceed 127 characters.

2. Make good use of "Task Manager".

Press "Ctrl+Alt+del" in Windows XP to bring up the "Task Manager" window, press and hold the "Ctrl" key while activating the menu "Shut down", and select the "Shutdown" or "Restart" menu item. At this point, you'll find that Windows XP's shutdown speed can be said to be instantaneous (exaggeration).

3. Modify the registry and remember to back it up.

The bulky Windows XP operating system shuts down very slowly, it takes about 30 to 50 seconds, but if you change the registry options according to the methods provided below, your Windows XP system will shut down very quickly. Find the hkey Current User Control Panel Desktop key, and change WaitToKillAppTimeout to 1000, that is, wait only 1 second when closing the program.

200, indicating that the program waits for seconds when an error occurs. 2. Set the autoendtasks value to: 1, and let the system automatically close the program that stops responding.

It only took me five seconds to shut down with the above method, and it used to take more than 30 seconds.

Power management mode, can be popularly understood as the way of managing power supply of motherboards in different eras, motherboards before 2000, using power management mode called standard PC, after 2000, there was ACPI mode, such as the commonly used 810, 815 and other motherboards are this mode. By the time the 845 motherboard came along, the power mode was changed to the ACPI UniProcessor PC, and until now, new motherboards use this power mode.

The power mode is wrong, and the problem caused by it is:

1.During the process of entering Windows, only one cursor flashes in the upper left corner of the screen, and you cannot continue to enter the system.

2.Automatic restart during the process of entering Windows.

Therefore, how to correctly identify the various power modes during the recovery process is the key to the success of cloning. With the advancement of technology, the process of restoring clones can be basically correctly identified, and can be manually selected during the recovery process. But once the installation has been completed, it is found that the power cannot be turned off, which means that the power mode has been identified incorrectly, and I want to change it, but I can no longer select it in the startup project, because it has disappeared automatically after the system is installed.

This is a gadget written by netizens to solve this problem, it can change the power management mode under Windows, and the computer can be shut down normally after changing it.

During the shutdown process, everything is normal, but it stops at "You can safely shut down the computer" and cannot automatically cut off the power, you need to manually press the "power" button on the panel of the main chassis to shut down. The reasons for this failure are generally as follows:

1 No power support turned on.

Click "Start Settings Control Panel Power Options High Energy Power Management" and select "Enable Advanced Power Management Support".

2 The BIOS is set incorrectly.

If you are familiar with the BIOS settings, please go to the BIOS and try to modify the power management options in the BIOS. If you are not familiar with the BIOS, then simply select the "Load Default Setup" option and restore the BIOS to the default settings at the factory.

3 Office XP is also in trouble.

Office XP has always been a controversial issue. It is a Microsoft text service file that will automatically invoke as long as the user has installed Office XP and installed the "Optional User Input Method Component" to provide text input support for speech recognition, handwriting recognition, keyboard, and other user input technologies. Even if we didn't start Office XP, it still ran in the background.

It's it, it often causes a shutdown failure, you might as well uninstall it.

Click "Start Settings Control Panel Add Remove Programs", select "Microsoft Office XP Professionain with Frontpage" among the currently installed programs, click the "Change" button, select the "Add or Remove Features" option in the "Maintenance Mode Options" dialog box, click Next, and the "Select installation options for all Office applications and tools" dialog box pops up, "Office Sharing Features" option, check the "Chinese optional user input method" option, select "Do not install" in the pop-up menu, as shown in Figure 2, and click the "Update" button.

4 apm nt legacy node is not turned on.

In general, if the APM NT Legacy Node is not turned on, it may cause the power to shut down, but it cannot automatically cut off the power supply. Go to Device Manager and click "View Show Hidden Devices" in the menu bar to display all hidden devices in the system. In the Device List box, check whether the APM NT Legacy Node option is available.

If your computer supports this feature, you will have this option, double-click and click the "Enable Device" button in the pop-up properties dialog box.

System, you can click on msconfig - in the dialog box that appears, click Advanced to check Disable Rapid Shutdown.

Widows XP Shutdown Doesn't Automatically Power Off Solution 1 The easiest: Check Advanced Power Management in the Power Options in the Control Panel"Enable advanced power management"That's it.

2. Modify the registry Open the registry (start running and enter regedit), find the "hkey local machine software microsoft windows nt currentversion winlogon" branch, find or create a reg sz registry key in the right pane, named "powerdownaftershoutdown", Double-click to set its value to 0 (0 is to allow the automatic power off function, 1 is not to allow the automatic power off function), and when it is done, exit the registry and restart the computer.

Note: This method is suitable for Windows NT 2000 XP 2003.

Halo

Halo Halo

Halo is not that complicated.

Do what I say!

Control Panel >> Power Management >> Advanced puts advanced power management on the hook, the reason is that XP doesn't support the power management mode of your motherboard by default, and you can install the motherboard driver to solve it

This should be a problem with the newly installed system, so let's install it on a different system.

This is not an illegal shutdown. It should be that your motherboard settings are a little wrong.

Go to Control Panel - Power Management - Advanced - Enable Advanced Power Management Mode.

Your computer is old and does not support ATX power management.

Is the system you are using cloned? There is a problem with the power mode! )

The power management mode can be popularly understood as the way the motherboard manages the power supply of different eras, and the motherboard before 2000 used the power management mode called standard

PC, after 2000, there was an ACPI mode, such as the commonly used 810, 815 and other motherboards are this mode. By the time the 845 motherboard came along, the power mode was changed to ACPI again

uniprocessor

PCs, until now, new motherboards use this power mode.

The power mode is wrong, and the problem caused by it is:

1.In the process of entering Windows, only one cursor flashes in the upper left corner of the screen, and you can't continue to enter the system.

2.Automatic restart during the process of entering Windows.

You'd better set the power mode!