If you understand computer resource sharing, come here!

The computer next to you must have a network connection that can be shared. Either it's a pope virtual connection. Either that, it's a connection made by a real network card.

After he shares, set the IP address of this network card to the subnet mask to You can set your IP on your computer. The gateway is.

It's best to use a router, the connection is the most stable.

If your cat has a routing function, buy a hub, if you don't have it, buy a router The setup is quite simple, just install it and look at it.

This one is better. I'm going to learn too.

1.After installing the Windows XP operating system on the machine, the attributes of the two network cards are displayed under the "Properties" of "Network Neighbors": "Local Connection 2 Network Cable Unplugged Realtek RTL8139 Family PCI Fast Ethernet NIC" and " The Local Connect 3 network cable is unplugged from the Realtek RTL8139 Family PCI Fast Ethernet NIC

Insert the twisted pair connector into the network card of "Local Connection 2", then the "network cable is unplugged" of the network card becomes "enabled", and configure it according to the "IP" address provided by the network service provider to enable the function to access the Internet normally. The NIC of "Local Connection 3" does not need to be configured.

2.Use another machine as a client, install a network card on it, install the Windows 98 operating system, and configure the network card according to the IP address of the host.

3.Make a dual-machine interconnection line, which is commonly referred to as a "cross line". This step is very critical, the two ends of the twisted pair should be made in accordance with the "T568A" and "T568B" standards, the plastic shrapnel of the crystal head is made downward, the metal press is forward, arranged from left to right, and the line sequence of "T568A" is arranged as follows:

T568B" is arranged in the following order:

Insert one end of the "crossover cable" into the "Local Connect 3" network card socket of the host, and the other end into the network card socket of the client.

4.On the desktop of the host, right-click "Network Neighbors" to display the shortcut menu, left-click "Properties" in the shortcut menu, the "Network Connection" window appears, hold down the "Ctrl" key, and left-click the two NIC icons to select the two NICs. Hold down the "Ctrl" key, then right-click the shortcut menu to pop up, and left-click the "Bridge" option in the shortcut menu, at this time the system prompts "Windows is bridging the connection, please wait......Later, the icon of "Network Bridge MAC Bridge Microport" appears, which means that the bridge has been successfully connected.

After completing the above steps, the two machines can access the Internet at the same time without interfering with each other, it should be noted that the client is connected to the Internet with the help of the "bridge" function provided by the host Windows XP operating system, so the premise of the client Internet access is to make the host in the boot state.

The above method is to use three network cards to connect two machines to access the Internet together, as long as there are enough slots in your host, you can also access more machines to access the Internet at the same time, the author is to use four discarded network cards to connect three machines to the Internet, which not only saves the cost of Internet access, but also saves resources (also saves the floppy drive, optical drive, USB disk of two clients), a family of three Internet access at the same time, do not interfere with each other, and have fun. (Wen Bu Qiliang).

Buy a land game and you can surf the Internet together without affecting your Internet speed, the operation is very simple, it is something like a converter, just plug it in.

Answer]: a, b, c

Poor Jing Clan Test Center] Calculation Draft, Careful Machine Resource Sharing.

Analysis] Computer resource sharing mainly includes hardware resource sharing, software resource sharing and data resource sharing. Therefore, ABC is chosen.

A computer that provides shared resources to the network and manages those resources is called a server.

A server, also known as a server, is a device that provides computing services. Since the server needs to respond to and process service requests, the server should generally have the ability to undertake and guarantee services.

The composition of the server includes processors, hard disks, memory, system buses, etc., which is similar to the general computer architecture, but due to the need to provide highly reliable services, it has high requirements in terms of processing power, stability, reliability, security, scalability, and manageability.

In the network environment, according to the different types of services provided by the server, it is divided into file server, database server, application server, web server, etc.

It's the University of Technology again!

A computer that provides shared resources to the network and manages those resources is called a server.

Select [B].

Answer]: B server is a kind of high-performance computer on the network that provides various services for the client computer, and it is under the control of the network operating system, and the hard disk, printer, modem and various special communication equipment connected to it are provided to the customer site on the network to share, and can also provide centralized computing, information publication and data management and other services for network users.

It's the University of Technology again!

It's called Jane Coma (Server).

Instant Auction [B].

Hard disk copying is possible! But I'm not very good at the specifics.