What kind of lighting is suitable for badminton court floor lighting and outdoor badminton court lig

The lamp is the lamp on both sides, which is not dazzling, the brightness is appropriate, the height is appropriate, and the specific is about three meters.

Generally the pitch is 3 meters high on both sides.

Generally on both sides of the venue.

Professional not dazzling (Beijing Enyu new materials****) "Enyu" official website.

The special light for enyoo badminton is the same as the special light for the training hall of the national badminton team, and the light is hung on both sides of the court line, which is not dazzling, so that the athletes can play a better level in the game. 5000 hours average life, high light efficiency, slow light decay, low power consumption.

Energy saving: enyoo badminton lamp outstanding energy-saving effect, 80% energy saving than traditional lighting, each badminton court only needs 8 badminton lights, each enyoo badminton lamp is composed of 8 28 watts of enyoo (enyoo) special energy-saving lamps, the total power of kilowatts, each court per hour power consumption is only one yuan.

High brightness. The enyoo badminton lamp is a trichromatic light source, which is twice as high as the fluorescent lamp, and the light is soft to protect eyesight.

Enyoo (Enyu) brand badminton court special lights can work normally 170V to 250V, each lamp body size is 120cm 60cm, divided into single-sided lamp body and double-sided lamp body, single-sided lamp body is equipped with 8 ENYOO (Enyu) special energy-saving lamps, double-sided lamp body is equipped with 16 ENYOO (Enyu) special energy-saving lamps, the power of each lamp is 28W, each badminton court uses 8 lamp bodies, the lower edge of the lamp body is high from the ground, The vertical point of the lamp body is 50cm away from the doubles edge line on both sides, and the middle vertical line of the middle 2 lamp bodies is aligned with the badminton net column, and the distance between the two lamp bodies is that each field is a set of independent circuits, and the cross-sectional area of the power cord is "square millimeters". Model: Enyoo (Enyu) badminton court special light is divided into:

Popular, Training, Competition, Luxury. According to different venues and different needs, you can choose the suitable special lights for enyoo badminton courts. Badminton flooring.

It is recommended to choose enyoo (Enyu) green lychee pattern 08601 leather pattern 08302 sports flooring, or enyoo (Enyu) green frosted 08101 or enyoo (Enyu) green frosted 08103 sports floor. The performance of professional sports flooring and higher cost performance are undoubtedly the best choice for mid-to-high-end indoor badminton courts.

Badminton reel.

Badminton cleaner.

Enyoo PVC plastic floor cleaner is made of a variety of surfactants, which can effectively remove all kinds of stains on the surface of Enyoo flooring, and the special cleaning factors contained in it can effectively remove black shoe prints. This product is added with vantocillb fungicide produced in the United Kingdom, a unique bactericidal factor, which can effectively kill a variety of pathogenic bacteria such as Escherichia coli and Staphylococcus aureus fungi adsorbed on the floor surface, and can inhibit the odor caused by mold. This product tends to be neutral, the smell is fragrant, and it is suitable for surface cleaning and daily maintenance of ENYOO flooring, and makes the decontamination and sterilization maintenance complete at one time.

Outdoor lamps and lanterns, the most important thing is waterproof and dustproof. This is followed by frost protection and sun protection.

Metal halide lamp, special lamp for sports courts. There are 400w and 1000w. The special venues for the competition are all 1000w. (Glowing Oba I).

Expansion: The size of the outdoor badminton court.

The badminton court is a rectangular court with a length of meters, a doubles court with a width of meters, and a singles court with a width of meters. The width of each line on the court is 4 cm, and the measurement should be calculated from the outer edge of the line. The boundaries of the course are best drawn in white, yellow, or other colors that are easily recognizable by the cherry blossoms.

The badminton court is divided into two halves by the center line laterally; It is divided lengthwise. 3

What kind of materials are used for badminton courts?

Professional badminton court requirements are higher, and there are currently two main types of badminton court materials used in international competitions, one is PVC sports flooring, and the other is acrylic balls, and now acrylic courts are more popular. 1. PVC sports floor is wear-resistant, safe, good in characteristics, excellent in slip resistance, easy to clean and maintain. It will not be affected by the athlete's beating to other sports.

3. Professional badminton court requirements are higher, and there are currently two main types of badminton court materials used in international competitions, one is PVC sports flooring, and the other is acrylic court, which is now more popular. 1. PVC movement. 3

What lamps are generally used for indoor badminton court lighting?

The lamps used in the indoor badminton court use ceiling-mounted explosion-proof lamp shades. Built-in LED lamps, strong light, suitable for indoor sports light.

When choosing badminton hall lighting fixtures, there should be several aspects to consider

First, the key glare problem;

Second, the illumination requirements of badminton lighting;

3. The color temperature and color rendering index of the badminton lighting;

4. The start and restart time of the badminton hall lighting;

5. Strobe problem;

6. Service life and later maintenance costs;

7. Energy efficiency issues, investment costs and operating costs;

The commonly used lamp of the ball court has a round cup, a row of tubes, and a V-shaped double-sided LED court light, the two sides are the same rectangular base yard shape, the luminous area is large, the light is soft and uniform, the key is that this kind of sale which V-shaped lamp can only open one side, for example, a V-shaped lamp power is 120W, only open one side, the power is 60W, especially suitable for commercial Yufeng Hu Mao Stadium .

Now playing badminton fiber can't be too long and too long, and one side's eyes will be hurt,

Generally, the test lamp is easy to install and maintain, and it is a fluorescent lamp.

Diwali is outdated, if you look at the size of the TV broadcast which uses Diwali, the illumination of Diwali does not meet the requirements of badminton at all, it is very dark. And it has to be on the three-meter-high position of the venue, you can see if all the badminton halls with Dilans feel very depressing overhead, and the stadium feels very low-grade, or use metal halide lights, the illumination is much higher than Dilan, it is not a grade at all. Some people will say, that kind of lamp is dazzling, in fact, it depends on what kind of metal halide lamp, the metal halide lamp you buy from the lighting city must be dazzling, because it is used by the factory, and the metal halide lamp lamp of the professional sports venue is treated and will not be dazzling, and the stadium feels clean and empty, and the grade of the stadium is high.

Yasaka Lighting is specialized in badminton lighting, you check it.

There's an enyoo that's okay, I've seen it at the Huilongguan site.

Now there are more diwafers, or badminton lights.

enyoo badminton lights are indeed very good and professional, and they are divided into: popular, training, competition and luxury.

**It's also OK, all kinds of grades are sold by Zen Ran, our unit uses a good section of the balance, remote control, automatic lifting, all done, a venue cost fifty or sixty thousand. That kind of popular cheap, a venue only costs a few thousand yuan to make money, there is no way to give it to the leader, you can only use it well, hehe.

In order to make the white balls contrast well with the background, it is best to use brown or green for interior decoration walls and ceilings, and for floors with low reflectivity.

Illuminance standard (GB) for badminton courts:

Amateur Race (Training): 150lx 300lx, General Race: 300lx 500lx, Official Race: 500 750 Higher (1500lx).

Auditorium 30lx 100lx.

Standard arrangement: 1. Use the lamps on the ceiling for general lighting, and then increase auxiliary light transmission lighting from the higher positions on both sides of the net;

2. Use indoor side walls for side lighting or indirect lighting;

3. The lamps and lanterns should have a light grille to prevent glare;

4. In order to make the white ball have a good contrast with the background, the interior decoration wall and ceiling should be best decorated with brown or green, and the floor should be decorated with low reflectivity.

At present, mercury lamps or LED light sources are used with a little warm light. Usually, the height of the badminton hall is relatively high, so the LED with better light transmittance and the mercury lamp with a larger astigmatism are better, and the replacement cycle is also longer.

There are usually three forms of lighting in badminton halls: natural lighting, artificial lighting and hybrid lighting at the same time. Most of the modern badminton courts are mixed lighting, and the artificial lighting of the badminton court is general lighting.

In the design of the badminton hall, in order to enable the players to accurately judge the ball path, height and landing point, the first thing is to maximize the use of natural light, the effect of natural light is the best, of course, to prevent glare, not to let too strong light directly or reflected into the eye. The second is to increase the stability of illumination and the uniformity of distribution. This is very important not only for the athletes to achieve excellent results, but also for the accurate scoring of the judges and the appreciation of the spectators.

Stadium lighting fixtures, selected according to the lighting design.

At present, the best badminton hall lights are special badminton court lights with special LED light sources, special LED light sources, even if we stare directly at them for a few minutes, our eyes will not be dizzy, coupled with specially developed lamps, which greatly improve the level of anti-glare. With the continuous improvement of LED lamp bead technology, the LED light source with 200 lumens per watt of light efficiency will soon be on the market, and the 170LM W light source will soon be popularized, and there is basically no other light source with the light effect of LED. Of course, at present, there are many inferior LED light sources and lamps on the market, the good and the bad are uneven, and the ordinary consumers are not clear at all, the current ordinary LED light source light source is 60-80lm w, the inferior ones are 60 and below, and the better ones are around.

A general principle to distinguish whether high-quality LEDs are very cheap light source lamps and lanterns must not be too good, and manufacturers will not take good things to sell very cheap ones. (Shenzhen Liangcan).

It's an old question.

First, lamps are necessaryAnti-glareAt the same time, it is equipped with anti-glare reeds and light guide plates, so that the light can be soft and not dazzling. Therefore, whether it is a side light or a ceiling light, anti-glare comes first.

What lights are used in the badminton court.

What lights are used in the badminton court.

Second, what about itUniform illuminationThere is no dark area, and the third illumination reaches the corresponding standard.

What kind of lights are used for badminton courts.

Finally, the installation position and height should be reasonable and scientific.

What kind of lights are used to accompany the badminton court?

What kind of lights are used for badminton courts.

Speaking of which, I believe you will understand that what kind of lamp to use is good to stare at, when it is based on your own stadium space, budget and positioning, targeted solutions are good solutions, suitable is really good, more consultation welcome + micro sunfit contact us.

Badminton lighting standard is attached, and the necessary self-pickup.

What kind of lights are used for badminton courts.

Ordinary Dilans are generally about four meters above the ground. If the lamp is a spotlight, it is possible to install it up to a height of 9 meters. Shenzhen Liangcan Company specializes in the development of badminton court lights, signing contract package effect.

On both sides of the badminton court, 2 meters from the sideline, the height is not less than 9 meters, and if it is used by amateurs, it can be determined by referring to the actual situation of the venue.

On both sides of the badminton court, it is better to install side lights on both sides of the badminton court at a distance of 2 meters from the sideline.

It is better to install side lights on both sides according to the height. Not glaring.

In the lighting of indoor badminton courts, there are basically two lighting modes:

The first is to take the entire stadium as a unit, and evenly distribute the lights according to the number of square meters covered by each stadium lamp.

The second is to use each badminton court as a unit to set up lights independently. The matrix uniform lighting mode is widely used because it saves the number of stadium lights.

Matrix uniform lighting pattern, number of stadium lights

In the matrix uniform distribution of lights in badminton courts, the preliminary statistics average to each badminton court, the number of lights and power consumption of the court are usually as follows:

400W metal halide lamp: the average per badminton court is generally about 4--6, straight tube lights: the average per badminton court is generally about 6-8 light rows, 180W high-frequency induction lamp:

The average number of badminton courts is about 6-8, and the average number of high-power energy-saving lamps and high-frequency energy-saving lamps is about 6-8.

You can ask the champion kemp badminton row light has an installation method.

No dazzling, no glare, high light efficiency, no light pollution. The light is concentrated and does not shoot indiscriminately, but evenly shines in the field. For specific design, you can contact the lighting of Liangcan brand feather table tennis lamps.

Just think of a shadowless lamp, don't be too dazzling.

Do not sit on the top of your head, it will shake your eyes, and it is best to shine from both sides.

There are several cases:

1. If the height of the badminton court is not very high (such as a factory), but the area is very large, the lanterns will be hoisted from the roof two meters outside the sidelines on both sides of the court.

2. If the height of the badminton court is very high and the area is rectangular, you can pull two very thick iron wires or steel wires on the walls or pillars at both ends of the bottom line of the court (two meters away from the edgelines on both sides), and the steel wires must be pulled very tightly, and then install the lamps on the wires.

3. If the stadium is tall and large, and there are no pillars to rely on in the middle, it is impossible to install a row light.