-
Thermostats have a direct impact on refrigerators. The temperature of the refrigerator is controlled by the thermostat, and if it breaks, the temperature of your refrigerator cannot be controlled. It will cause the refrigerator to stop or not refrigerate. You can change it to a mechanical or electronic one.
-
Yes, if the temperature control is broken, the refrigerator will not cool or not stop.
-
The most common is that the compressor always works without stopping, followed by the temperature regulation, the temperature difference is very large, etc.
-
In winter, if the ambient temperature is lower than 12 degrees, the refrigerator compressor will fail to start working automatically.
If the auxiliary power is damaged, it should be overhauled and replaced. The emergency use method is to adjust the thermostat gear to the highest every morning, noon and evening, so that the compressor can be forced to start working, and then adjust to the appropriate temperature, seven gears can be adjusted at 4 5 gears, and five gears can be adjusted between 3 and 4 gears.
-
First, the thermostat is turned on
off if in a closed state loss.
If the refrigerator is bad, it will not stop running.
1. Inspection method DAO: If the refrigeration is good and the non-stop capacity is good, it can be concluded that the thermostat is damaged.
2. Solution: You can purchase the same type of thermostat to replace, or you can purchase a refrigerator timer to control the start-up and shutdown, which is also very convenient to use.
2. If the thermostat switch is damaged in the open circuit state, the refrigerator will not start or turn on.
1. This fault check method is: open the strong cold gear (quick-freezing gear) of the refrigerator, and if it can be started, it can be concluded that the thermostat is damaged.
2. Solution: Conditionally purchase the same model thermostat to replace, or you can purchase a refrigerator timer, turn on the forced bell to run, and use the timer to control the start-up and shutdown.
-
1. It may be due to the thermostat.
The contacts of the thermostat are sticky, so the thermostat always fails. 2. It may be carbon deposition between the temperature sensor and the contact.
This can lead to damage to the thermostat. 3. It may be that the thermostat gear does not match. Suggested workaround:
1. First of all, it is judged that the damage of the thermostat is empty, such as the adhesion of the contacts of the thermostat, the carbon deposit between the thermostat and the contacts, etc., which are the causes of the damage to the thermostat. When these situations occur, the refrigerator will have the following situations, such as the refrigerator does not start, or the refrigerator does not stop running, or the refrigerator compressor appears.
If it doesn't work, it's all due to a damage to the thermostat. 2. First of all, check whether the compressor of the refrigerator has been working normally, if so, you can adjust the thermostat to the set gear, but as the temperature rises, the compressor appears to be noisy without stopping, which is likely to be the contact bonding god is blind, resulting in the thermostat can not be disconnected. The solution is to find the contacts after disassembling them so that they can open and close normally.
3. If the compressor is still working when the refrigerator adjusts the thermostat knob to the non-stop gear, and the refrigerator still does not start working when it is adjusted to any gear, this situation is the refrigerant in the temperature bag.
There was a leak. The solution is that it is recommended to ask a professional master for inspection and maintenance. 4. If the thermostat is damaged, it will cause the refrigerator compressor to work or shut down all the time, in this case, it is best to ask a professional maintenance master to test and repair, do not try to repair it yourself, so as not to cause large-scale damage to the refrigerator.
-
If the thermostat of the refrigerator is broken, you need to replace it with a new one.
1.If the thermostat of the refrigerator is broken, it may cause it to not start, you can adjust the thermostat of the refrigerator to the highest setting, if it can be activated, it proves that the thermostat is bad.
2.A broken thermostat can also cause non-downtime.
3.If the refrigerator has electricity (the light is on), but the compressor does not work, then you need to measure whether the compressor has power supply, if there is no power supply, then it means that the thermostat has no voltage output, you can judge that the thermostat is open, and replace the thermostat.
4. Thermostat, as the name suggests, is an instrument that controls temperature. Like a normal double-decker refrigerator, there is usually a freezer compartment below and a refrigerator compartment above. Because the refrigerator will put some fruits and vegetables, it is designed on the upper floor for people to take frequently.
5. In the refrigerator on the upper floor, there is a circular knob (usually near the refrigerator lamp), which will be marked with numbers, which indicate different temperature standards in order.
6. There are common 0 7 or 0 5 gears, and the larger the number, the stronger the cooling effect, which is why it will be adjusted to a higher gear in winter and a lower gear in summer.
-
Why is the thermostat of the refrigerator easy to break, you can find out the relevant information for you: 1. It may be due to the adhesion of the contacts of the thermostat of the thermostat, which leads to the failure of the thermostat. 2. It may be that carbon deposits between the thermostat and the contact, resulting in damage to the thermostat.
3. It may be that the thermostat gear does not match. Suggested solutions: 1. First of all, judge the damage of the thermostat, such as the adhesion of the thermostat's contacts, the carbon deposition between the thermostat and the contacts, etc., which are the causes of the thermostat damage.
These situations will lead to the following situations in the refrigerator, such as the refrigerator does not start, or the refrigerator does not stop running, or the refrigerator compressor cannot rotate, which is due to the possible causes of damage to the thermostat. 2. First of all, check whether the compressor of the refrigerator has been working normally, if so, you can adjust the thermostat to the set gear, but as the temperature rises, the compressor does not stop, which is likely to be the contact bonding, resulting in the thermostat can not be disconnected. The solution is to find the contacts after disassembling Bu Suihui so that they can be opened and closed normally.
3. If the compressor is still working when the refrigerator adjusts the thermostat knob to the non-stop gear, and the refrigerator still does not start working when it is adjusted to any gear, this situation means that the refrigerant in the thermostat has leaked. The solution is that it is recommended to ask a professional master for inspection and maintenance. 4. If the thermostat is damaged, it will cause the refrigerator compressor to work or shut down all the time, in this case, it is best to ask a professional maintenance master to carry out inspection and maintenance, and do not try to repair it yourself, so as not to cause large-scale damage to the refrigerator.
I hope it can help you and wish you a happy life and good health.
-
Hello dear, why is the thermostat of the refrigerator easy to break: too much opening and closing of the refrigerator door, so that the temperature in the refrigerator is hot and cold, so that the temperature control switch is frequently opened and caused by the recommended treatment method: 1. You can stop the circular machine, indicating that the thermostat action mechanism is out of order, it may be that the contacts are sticking, pry the contacts open with a knife, and use a small piece of sandpaper to polish, clearly.
The dust on it is good, and the fault can be repaired. 2. If the contact burn is more serious, it may be necessary to replace the new temperature control, because some parts may have been damaged, and the maintenance takes time and effort, and the use time is not necessarily long, so it is not cost-effective. Replace the thermostat must be 1a heavy, it is best to replace the thermostat of the same specification, if not, the parameters of the replacement thermostat should be quite close to the original thermostat, that is, the temperature control characteristics are the same or similar.
3. When the temperature in the box is lower than the set temperature, the compressor does not stop, it may be that the temperature sensor is filled with too much, and the temperature controller is operated by slowly deflating the pressure, if the temperature in the box has not reached the set temperature, it may be that the temperature sensor is filled into the basin too much.
-
There are three obvious phenomena when the refrigerator thermostat is broken: First, the refrigerator only starts at a high level. The refrigerator originally did not start, and after adjusting the gear to high (5th or 7th), the refrigerator suddenly started to start, indicating that the thermostat was faulty.
Second, the refrigerator has electricity (the light is on), but the pressing and shrinking machine is not working. Three, the refrigerator refrigerates normally, but the compressor keeps working.
<> knowledge development: How to determine if the refrigerator compressor is working?
Close to the middle and bottom of the refrigerator, feel the refrigerator is shaking slightly, and there is a faint buzzing sound, indicating that the compressor is working.
Under normal circumstances, the refrigerator compressor starts to work for about 10 minutes at a time, and starts once every half an hour. If you don't feel like the compressor is working or keeps working, it's a sign of a problem.
It has a fault, there are three states, one is that the switch has been kept closed, the second is that the switch has been kept open, the third is that the temperature can not be accurately sensed or the temperature can not be accurately set, the switch seems to be open or closed normally, but the temperature is high and low. The refrigerator thermostat is a component used in the refrigerator to control the refrigerator refrigeration temperature and adjust the refrigerator refrigeration temperature. So the above corresponds to the three conditions of the refrigerator as follows: >>>More
It depends on the type of thermostat. If it is an electronic thermostat, it should be set and adjusted according to the operation steps of the manual, the freezer room is about minus 18 degrees, and the refrigerator room is between 4-8 degrees. >>>More
Eyebrow trimming will not have an impact on fate (before the age of thirty) You are sometimes angry and easily irritable. That's when it's best to trim your eyebrows! >>>More
At the bottom of the freezer, the frost must be defrosted when the morning thickness reaches about 4-6 mm to ensure that the refrigerator has a good cooling capacity. This layer of ice can interfere with the heat exchange efficiency of the evaporator surface, affecting refrigeration. This increases the power consumption of the refrigerator. The methods of defrosting are: >>>More
The initial appearance of the oxygen sensor is that the engine fault light is on (or occasionally flashing) in the instrument, but the car can barely drive for a short time; If it is not repaired for a long time, the computer (ECU) of the electronic fuel injection system will not be able to obtain the information of oxygen concentration in the exhaust pipe, so it will not be able to feedback and control the air-fuel ratio, which will increase the fuel consumption and exhaust pollution of the engine, and the engine will have unstable idling, lack of fire, surge and other fault phenomena. Therefore, it is necessary to troubleshoot or replace it in a timely manner. Generally, today's cars have two oxygen sensors at the front and rear, respectively in the front and rear of the three-way catalytic converter, and the faulty one should be replaced in time. >>>More