Why can t my computer move every time I turn it on?

CHKDSK is a disk self-test program that comes with Windows, and this interface indicates that there are files on your hard disk that are corrupted. After this interface appears, you should not rush to turn it off, do not touch the computer, and let chkdsk run to finish. It usually runs out in 10 minutes.

If the self-test is successful, the corrupted file will be repaired. chkdsk will not appear the next time the computer is restarted. If chkdsk still appears the next time you restart your computer, you can manually run chkdsk:

Start - Run, enter cmd, enter chkdsk f x d:

where d: refers to your drive letter. After running it enter chkdsk f x e:.

If you have other drive letters, enter the above command again. Do not enter chkdsk f x c: because the c drive is a system disk.

It cannot be run in cmd.

If chkdsk still appears after the computer restarts, I recommend that you reinstall the system.

Take a look at the antivirus, if not, it means that there is a problem with the memory or the graphics card.

You can't turn on the motor, there are a lot of this kind of problem, it doesn't affect the normal operation of the computer, you can't move when you turn on the computer, you press Ctrl+Alt+del to come up with the taskbar, and then close the taskbar, it's OK!!

That's a disk self-test,It's not a blue screen phenomenon,It generally appears after an illegal shutdown,The cause is complex,Generally can't be canceled,The best way is to reinstall the operating system,If you don't want to reinstall the system,Then bear with it,By the way,Pressing the "enter" key is useless,Press the "esc" key is useful。

1. The following is the motherboard identification interface, this interface we will see such an English "press del to run setup" desktop is generally del, the notebook is different according to the manufacturer, according to their own page prompts to choose which button.

2. Press the del key to enter the following interface, and use the cursor key to select the rightmost option "exit".

3. After entering and exiting, the following interface will appear. At this point, we use the up and down cursor keys to select the "Load Set Defaults" option, press enter to confirm and save.

4. Go to the previous step and press F10 to save and quit the computer should fix the problem. If the problem is not solved, it could be another issue mentioned above. I'm telling you how to skip the motherboard logo interface on boot, we use the left and right cursor keys to select the boot option.

5. Select the white English option in the figure above, that is, to start the configuration settings. Once you have entered this option, use the up and down cursor keys to move to the white English option as shown below.

6. Press the Enter key to display the following option box, select Disable, then confirm, press F10 to save and exit, restart the computer, and you will find the full-screen logo interface disappears.

Situation: Unable to enter the system normally.

Solution: If there is no other prompt on this interface, it is recommended to reinstall the system directly.

Note: Before installing the system, it is recommended to enter the hard disk through the Win PE system to transfer important data to a non-system disk.

If it is stuck in the logo interface during the boot process after booting up, it is recommended to perform the following checks.

First, reboot the BIOS interface and check whether the hard disk detection is normal.

If the hard disk detection is normal and the boot settings are correct, it is generally a system problem.

You can restart the computer, press F8, if the advanced menu can be displayed, try to select the last correct configuration, and see if it can start. If you still return to this interface, you can only solve the problem by reinstalling or repairing the system.

This is when you boot up and enter the company interface, this should be caused by your system not shutting down normally, or it is a suggestion that you have not turned on the machine for a long time, you redo the system, otherwise how can you turn on this interface? This should be caused by the incomplete system, and it can be solved after redoing the system.

This display appears after the computer is turned on because the BIOS needs to be changed, but it is not saved, or the BEST main battery is out of power and the banks are restored, at this time, you can press the Dell key to enter the BIOS, and then restart it after saving it to start normally.

1.Click F8 to enter the boot menu interface, find the corresponding boot system to boot up.

2.It may be that the boot boot cannot be turned on because the boot boot is not read, so check whether there is a problem with the system first.

The system crashed, just reinstall the system.

Clean up the dust in the console and separate the power supply from the monitor.

Try changing the VGA cable, or wipe the gold finger of the graphics card with an eraser.

This problem is most likely a thread problem.

It's a hard drive error, and you need to check the hard drive. It could be a bad road.

Press F1 to enter.