How to apply for the installation of electric vehicle charging piles

The specific application plan for battery car charging piles

1. Confirm the charging conditions and safety conditions of outdoor electric vehicles.

This is a more critical step in the installation of outdoor charging piles, to first clarify whether there is a fixed parking space in the community, and whether the property agrees to install charging piles, in short, get the property, it is half done.

2. Apply for a power supply scheme.

After reaching an agreement and negotiation with the property of the community, you can apply for electricity to the regional power supply company by yourself, and wait for the power supply company to give a reply to the power supply plan, and then go to the power supply company for relevant procedures.

3. Installation and construction.

After the power supply scheme of the outdoor battery car charging pile is confirmed, you can choose the equipment suitable for your battery car charging among many battery car charging pile brands, and the battery car charging pile must meet the requirements of relevant regulations.

4. Apply for acceptance.

After the installation of the battery car charging pile is completed, you can submit an acceptance application to the power supply company, and after passing the acceptance, you can connect the battery car charging pile, and then you can put it into use normally.

Note: If the owner of the vehicle is unable to obtain the consent of the property or the community, even if the power supply company installs a meter for the owner, there will still be a situation where the wires cannot be pulled to the charging pile, resulting in the charging pile being unusable.

In order to solve this problem, the National Development and Reform Commission, the National Energy Administration and other departments jointly issued the "Implementation Opinions of the National Development and Reform Commission and Other Departments on Further Improving the Service Guarantee Capacity of Electric Vehicle Charging Infrastructure", requiring new residential communities: to ensure that 100% of the fixed parking spaces are built charging facilities or reserved installation conditions.

Electric vehicle charging piles can be used in the State Grid Shanghai Electric Power "Internet +" power supply service, and residential customers can not only apply on-site at the local power supply business hall, but also apply online through electronic channels such as the "Online State Grid" mobile app and 95598**.

The function of the charging pile is similar to that of the fuel dispenser in the gas station, which can be fixed on the ground or wall, installed in public buildings (public buildings, shopping malls, public parking lots, etc.) and residential parking lots or charging stations, and can charge various types of electric vehicles according to different voltage levels.

Charging piles have been included in the construction of new infrastructure, ** clearly put forward to strengthen the construction of new infrastructure (that is, new infrastructure), the development of a new generation of information networks, the expansion of 5G applications, the construction of charging piles, the promotion of new energy vehicles, stimulate new consumer demand, and help industrial upgrading.

Hello. The required information is as follows:

Original ID card (one name with the real estate title deed).

Housing title certificate (one name with ID card is required).

Self-use charging pile electricity application report,

Car purchase contracts and invoices

Proof of use of fixed parking spaces

Written documents and other information such as the property approval of the God charging pile.

The process of installing an EV charger is complex and requires the following steps:

1. Take the above information to the power supply business office or business hall to report for installation;

2. Within 3 working days, the power supply department will send someone to the site to investigate, and recommend the public to use electricity (national electricity, property points, and self-appliances) according to the actual situation;

3. The power supply department will send someone to install the wires and special meters;

4. Citizens can charge electric vehicles by connecting qualified sockets to the meter.

The charging piles installed by the professionals of the power supply department will definitely pass the acceptance of the fire department.

Before installing a car charging pile, be sure to go to the property of the community for consultation. The choice of wire is generally not less than 4 square millimeters, and the wire is generally recommended to choose copper core stranded wire. The electricity bill for residential electricity is about 6 cents at one time, but the power consumption of charging new energy vehicles for a long time should not be underestimated, especially now that household electricity is charged in a tiered manner.

The installation of the charging pile should meet the requirements:

a, the waterproof design of the underground part should be combined with the actual project, and the waterproof elevation should be reasonably determined;

b. The position of the charging gun of the wall-mounted AC charging equipment should not be lower than the ground meter, and should not be higher than the ground meter;

c. Protective measures should be set up before the charging equipment of the charging pile to prevent the vehicle from colliding with the charging equipment;

d, the wall-mounted AC charging pile charging equipment built at the same time should be set up in different regions, and it is advisable to use walls and fireproof partition facilities with fire resistance limits not lower than them, such as Class B fire doors, Class A fire shutters, and ordinary parking garage fire partitions.

e, when the wall-mounted support is used, the supporting part should be a reinforced concrete component, the wall thickness should not be less than 200mm, and the support wall should consider the load effect of the charging equipment.

f, the AC charger should be powered by 380 220V voltage level, and the grounding system of the charger should be TN-S.

g, the low-voltage circuit breaker that supplies power to the charging device, its rated action current is 30mA, the action time is not greater than, and it should have the functions of short circuit and residual current protection.

h, the combined AC charging device should adopt the chain power supply mode.

How to install an electric vehicle and what conditions are required for installation? With the advent of the new energy era, electric vehicles have sprung up, and while electric vehicles are growing rapidly, the construction of charging piles has become an indispensable part of the development process. So, what conditions do EV charging piles need to have before they are installed?

1. Confirm the charging conditions, or whether the installation conditions are met. This one is the most basic, if the installation is not allowed, the rest does not need to be considered. First of all, it is necessary to clarify whether there is a fixed parking space in the community, and then it is necessary to see whether the parking space can be connected to the line of the national grid.

Consent and cooperation from the property are required. If you want to install a charging pile, you must get the consent of the property. This mainly depends on the communication between the owner himself and the property. 3. If the property agrees and meets the installation conditions, it will apply to the power supply station where the community is located.

If the property agrees and meets the installation conditions, apply to the power supply station where the community is located.

Installation and construction. Needless to say, it has nothing to do with the owner.

After the construction of the charging pile is completed, you can submit an acceptance application to the power supply company, and after the acceptance is qualified, the power supply company will complete the work of installing the meter and connecting the electricity, and then it can be charged.

As long as the residential customer has its own property right or the right to use the parking space (garage), it can apply for the installation of charging facilities. The installation of charging piles in fixed parking spaces requires the consent of parking space managers (such as property management or owners' committees), and the path of laying low-voltage cables between the installation point and the distribution box requires the consent of relevant managers.

Owners need to install electric vehicle charging piles.

You can apply to the subordinate unit, and the subordinate unit will communicate with the company that provides charging services about the installation, or you can recommend the owner's representative or the willing owner to apply in the community.

After confirming the consent of more than two-thirds of the owners, the community can communicate with the company providing the charging service about the installation. If the owner has any other questions, it is recommended that the owner go to the community to consult the history and community staff.

A face-to-face reply will be made. After accepting the applicant's application for installation, technicians will be arranged to go to the site to inspect the scale and construction conditions of the community.

Calculate the benefits and construction costs, if the above conditions are met, you can formulate a plan for spring rent and start installation. For filing matters, owners do not need to submit any formalities for the installation of electric vehicle charging piles in their own private areas.

Here's how to apply for installation:

Tool: Redmi Note11 Pro

Version: MU13.

2. Click "Charging pile installation";

3. Select "Region";

4. Before processing, you need to prepare the certificate of use of the parking space, identity certificate, and property certificate, and click below to start the process after you are ready;

The process of installing a car charging pile:

Step 1: Apply to the property for confirmation. Understand the installation policy of community charging piles, inspect the installation environment of community charging piles, and apply to the community in advance if additional technical equipment investment is required. In most cases, there is a requirement for a fixed parking space.

Step 2: Look at the location of the parking space. Most of the residential areas are basically equipped with power distribution rooms, and the distance of parking spaces from the power distribution room will become the decisive factor for cost control, and the closer to each other, the lower the cost.

Step 3: Prepare the materials to apply to the power company. The materials include: a copy of the ID card, the property right of the parking space, the property consent installation instructions, etc.

Step 4: Investigation and installation. After receiving the application, the power company will conduct an actual inspection, requiring the property engineering personnel, the charging pile company, the power company and the owner to basically be present to determine the construction plan.

Depending on the distance between the parking space and the power distribution room, the construction time is different, the short one takes a few hours, and the long one takes a day.

Step 6: Acceptance. After completion, the charging pile company needs to report to the power company, and the power company will seal the seal and make the corresponding electric card after passing the test.

The installation conditions of charging piles of different manufacturers are different, and the specific installation conditions also need to consult the car manufacturer.

Many car enthusiasts will choose to install fast charging piles in their own communities or garages, and the charging speed of fast charging piles is very fast. Then before installing fast charging piles, you need to consult the property of the community and consult the car manufacturer.

Installation conditions. The function of the charging pile is similar to that of the fuel dispenser in the gas station, which can be fixed on the ground or wall, installed in public buildings (public buildings, shopping malls, public parking lots, etc.) and residential parking lots or charging stations, and can charge various types of electric vehicles according to different voltage levels.

The input end of the charging pile is directly connected to the AC power grid, and the output end is equipped with a charging plug for charging the electric vehicle.

1. First of all, you must have a fixed parking space, whether it is a property right parking space or a leased parking space, which is just needed (the rented parking space needs a lease contract);

2. Issue the property management unit's "Authorization Letter for Agreeing to Install Charging Equipment", and the general property company will verify the on-site situation and agree to install private charging piles, and sign and seal the "Confirmation of Charging Conditions for the Purchase of New Energy Passenger Cars", and you can apply for installation by telegram;

3. Take the above information and go to the power supply station in the district to apply for the installation of electricity for charging facilities.

Individual application: you need to provide your original ID card and the "Confirmation of Charging Conditions for the Purchase of New Energy Passenger Cars";

Entrust the car company to handle it: you need to provide the valid identity certificate of the entrusting person, the "Confirmation of the Charging Conditions for the Purchase of New Energy Passenger Cars", and the "Power of Attorney" signed by you (provided by the car company).

4. The staff completes the power connection; After your application for electricity is officially accepted, the staff of the power supply company will fill in the "Application Form for Installation by Customer's Telegraph", make an appointment with you to visit the site for investigation, and complete the reply to the power supply plan.

Summary. Dear, I'm glad to answer for you! The following conditions are required for the installation of EV charging piles:

1 Power supply: Reliable power supply** is required, which is 220V or 380V AC. 2 Ground:

It needs to have a level ground that can withstand the weight of the charging pile and the pressure during use. 3 Environment: It is necessary to maintain a well-ventilated, water-free, dust-free, and corrosive gas environment around the installation location.

4. Communication: There needs to be a reliable communication network so that the charging pile can communicate with the background management system. <>

Dear, I'm glad to answer for you! The following conditions are required for the installation of electric vehicle charging piles:1 Power supply:

A reliable power supply** is required, which is 220V or 380V AC. 2. Ground: It needs to have a flat ground, which can withstand the weight of the charging pile and the pressure or shed force during use.

3. Environment: It is necessary to maintain a well-ventilated, water-free, dust-free, and non-corrosive gas environment around the installation location. 4 Communication:

It is necessary to have a reliable communication network so that the charging pile can communicate with the background management system. <>

It needs to comply with local laws and regulations, building codes, and safety standards. 7. Maintenance: Professional maintenance personnel are required to regularly inspect and maintain the charging pile to ensure its normal operation and resistance to chaos.