Will the lights get water? How to solve the problem of water ingress in the headlights?

Regardless of whether the lights are changed or not, even if the lights are not changed, after a long time, water will enter, which is 100%. It's best to find Jingdezhen Luping car maintenance modification, change the lights in their house, the headlights into the water for life, and get it directly free of charge when the water enters! The after-sales service is very good, and a friend introduced a Jingdezhen Luping car maintenance modification, and the reputation is good!

The range of changing the lamp is relatively wide, and the current headlight part can be divided into two kinds, one is the non-dismantling of the lamp and the other is the dismantling of the lamp.

Non-dismantling lamp: This is to install xenon lamps and decorative lights, such as LED width indicator light steering, and high-brightness bulbs.

Dismantling the lamp: Installing bifocal lenses and angel demon eyes, etc.

At present, the lamp without dismantling the lamp will basically not cause water ingress, and the process technology requirements for dismantling the lamp are relatively high, and the probability of this kind of water ingress is still relatively large.

How to prevent: 1: Find a professional car lamp changing shop and find a master with good technical experience.

2: Use imported sealant, prohibit snake glue. At present, snake glue has been eliminated. It is best to have a gluing machine.

Explanation of water ingress and fogging: It is possible to determine that the seal is not up to the mark when changing the lamp and entering the water, but the fogging cannot be concluded that the seal is not good. Because of the large temperature difference between day and night in winter, and there are ventilation holes behind the headlights, it is normal for fogging to go down after a period of time.

If you want to change the lights, it is recommended that you find a professional store, generally the store with better manual work will not enter the water after the change, or you can consider the set of products installed by the Appa bag, there are basically professional store package installations across the country.

How to deal with water ingress from automobile headlights:1. The headlights that are easy to disassemble the lampshade only need to disassemble the headlight assembly;

2. Separate the lampshade from the shell and use a hair dryer to dry the water; Then install the recovery lampshade, seal the entire side seam with glass glue, and install the bulb and inserts.

3. The lampshade is not easy to disassemble (seal) the headlamp, and the headlamp assembly needs to be disassembled; Drill a hole in the bottom of the headlight with a hand drill (2-3mm drill bit); Drain the stagnant water in the headlights and use a hair dryer to dry the excess water;

4. Seal the drilled holes and side seams with glass glue. Finally, install the bulb and connect the plug-in.

Reseal the headlights.

If the sealant of the lampshade gradually deteriorates and begins to seep water.

Replacing the headlights with a new one is definitely the most convenient and hassle-free, but the cost is also higher!

It's better to bring your own heat gun and flat-mouth screwdriver.

Then buy a new lamp sealant online, and you can solve the problem of water leakage of the lamp sealant yourself.

First of all, the original water should be cleaned, dried with a heat gun, the original glue seam should be cleaned, and the sealing ring should be checked and installed after glue and glue drying.

As far as the overall structure of the headlights is concerned, whether it is an ordinary halogen headlamp, a xenon headlight, or a headlight with an LED light cluster, there is a ventilation rubber tube on the back cover. At the moment when the headlights are lit and even when the headlights are in use, a lot of heat will be generated, and the function of the snorkel is to exhaust the heat as much as possible out of the headlights to maintain the normal working temperature of the headlights

How to deal with water ingress from automobile headlights:

1. If it is caused by the temperature difference between inside and outside, just turn on the lights for a period of time.

2. If the water enters due to poor sealing, the headlamp needs to be disassembled, opened and dried.

3. If there is a large amount of stagnant water, check whether the internal parts are damaged.

4. You can buy the lampshade of the same model online and replace it at the auto repair shop.

The reason for water or white fog in the headlights is generally that the headlights are not tightly sealed, or that moisture enters through the drainage holes. If the moisture in the lamp is trapped for too long, it may have some effect on the circuit.

Workaround:

1. Slight water ingress.

After the lights are turned on for a period of time, the fog will be discharged from the lamp through the snorkel with the hot air, which will not damage the headlights and electrical circuits.

2. Heavy water ingress.

In the event of severe water ingress, the water inside the headlights is sufficient to raise fish. So the author disassembled it, opened the lampshade, and after drying, checked the surface of the headlight, and found no damage. If the car is also heavily flooded, it is necessary to disassemble the lampshade, check whether the surface of the headlight is damaged or may leak, if any abnormalities are found, it is recommended to replace the headlight back cover sealing strip and snorkel.

Hello: The headlamp is equipped with a ventilation pipe, the function of the ventilation tube is to exhaust the heat as much as possible out of the headlamp, to maintain the normal working temperature of the headlight, to ensure the stability of the headlight, and the water vapor can also enter the lampshade through it.

Solution. 1. Relatively slight water ingress in the lamp, the driver does not have to worry too much, the lamp is turned on for a period of time, after the wheel, the fog will be discharged with the hot air through the ventilator tube, which will not damage the headlights and electrical circuits.

2. Heavy water ingress, you need to disassemble the lampshade, check whether the surface of the headlamp is damaged or may leak, if Zechun finds abnormalities, I recommend replacing the headlight back cover sealing strip and snorkel.

3. If it is resolved decisively within the warranty period, 4S will be solved.

Landlord, what kind of car is yours? If it is a brother Nai old Buick is easy to do, the headlight disassembly is very convenient, pour out the water, but also attack the branch is recommended to the landlord to the maintenance shop to get, because the dust sensitive hernia headlights are tens of thousands of volts of high pressure, very dangerous, inexperienced people or do not touch the good, it may be that the back cover of the headlight is not sealed, ask the maintenance master to help you paste a circle with glass glue, so that there will be no problem.

This problem depends on the process and attitude to do things, let's analyze the headlight sealing problem one by one:

aProcess aspect.

1. Modify equipment.

Advanced equipment can play a multiplier effect with half the effort, headlight decomposition, our Smurfs change the lamp using the most advanced CNC constant temperature oven, of which temperature and time are the most critical factors, at present, many modification shops due to no advanced equipment or can not be proficient in the use of equipment, caused by the decomposition of the headlamp after the deformation of the lamp shell, the lamp surface fracture and other direct impact on the seal, resulting in water leakage and fogging;

2. Reasonable configuration and modification.

The space structure of each model headlight is different, and the destructive modification is also an important reason for the headlight leakage and fogging, under normal circumstances, the modification does not consider the characteristics of the headlight space structure, and the lamp shell is broken and deformed due to the excessive configuration volume, and the destructive hole is opened on the lamp shell, and then blocked with glue to destroy the overall structure of the headlight, which will inevitably cause the headlight to enter the water and fog. The optional configuration of various models depends on the rich experience of changing the lights, and the reasonable matching of different lights;

3. After the modification is completed, the headlights are sealed.

This link depends on the good process and sealing materials, different headlights, different rubber characteristics, different lamps, different lamps, general modification shops to reduce costs, the use of inferior colloids, lack of experience, do not consider the characteristics of the lamp shell glue, feel free to use, the glue adhesion is not good, resulting in fogging, we use a special glue injection machine, sealants are all imported original sealant, to ensure that the bonding is stable, many years of practical professional experience in changing lamps at the same time to ensure our mature technical process.

b. Attitude towards work.

Changing the lamp is a meticulous work, rigorous attitude and careful thinking is the key, no matter how good the equipment, no matter how good the process also needs to be operated by hand, skilled and experienced masters are the most important, at present, most of the modification shop masters lack enough practical experience or have not undergone systematic training, the skills are uneven, the process link is also the objective reason for the headlights to enter the water and fog, the Smurfs change the light center for many years of practical experience in lighting, thousands of modified vehicles, the modification master is through professional training, practical experience accumulation, Ensure the perfection of the process.

Not beat around the bush. To be 100% no problem, no one can guarantee, no modification shop can promise so, but the problem in the range of one percent is reasonable, our purpose is to promote their own continuous improvement in the process, constantly improve! There is no best, only better.

The machine presses, but it can't, and the hand can also press; I have never heard of vacuuming, because the lamp cavity needs to circulate with the outside air, and the cold and heat cycle breathe.

The glue of the headlamp is mainly to bond the light distribution mirror and the lamp shell, as long as the glue amount is uniform, the section "T" and "U" are completely pressed here"Other parts such as lamp holders, back covers, and dimming gears can ensure tightness.

The moisture is mainly caused by the water entering the lamp, you just need to let the lamp ensure that the water does not enter the car when washing the car. Otherwise, a little rain will also be foggy.