There are few kitchen sockets and electrical appliances are inconvenient to use, how to prevent them

There are few kitchen sockets and electrical appliances are inconvenient to useThen you should think about this problem when you are sure of the decoration, and the refrigerator and the hood next to it are a must.

At present, there are more and more kitchen utensils. Almost every household in the kitchen must have a range hood, refrigerator, refrigerator, kitchen treasures. Secondly, there are mainly the following kinds of electrical appliances

Induction cooker, wall breaker, soy milk maker, electric kettle, microwave oven or oven. Every household must use the necessary appliances in the kitchen, not every home. All of them must be purchased, so we can arrange the kitchen sockets according to the above principles.

First, each kitchen must install the necessary electrical sockets, including one next to the range hood, one kitchen treasure, one refrigerator, one refrigerator, and the above four。The second is the arrangement of the electrical sockets selected in the kitchen, which are basically concentrated on the kitchen counter, mainly including the following sockets: microwave oven or electric oven electric steamer socket, electric kettle socket, soybean milk machine, wall breaker, juicer and other sockets, that is to say, we should install at least three five-hole sockets on the kitchen counter;

The third is to increase the reserved sockets for future electrical appliances. It is recommended to reserve one socket per person for each refrigerator, one socket for each refrigerator, and at least two sockets for the kitchen operating platform. Finally, summarize the total number of kitchen outlets.

When decorating, at least 7 sockets should be installed. In addition, we should install a total of 11 outlets.

When decorating, you should think about this problem, refrigerator, and range hood next to it is a must.

Including one next to the range hood, one kitchen treasure, one refrigerator, one refrigerator, and the above four.

When decorating the house, I told the master in advance that I should reserve more sockets.

Try not to put them all in one socket, buy a few more to prepare.

When decorating, think about this problem in advance and press one more.

1. If it is only a problem of fewer sockets, the simple way is to pull another plug-in board, and you can also use it; If you need a socket in the base cabinet and you don't have one, you can't do it, you can only make a small hole in the beautiful countertop and lead it into the open wire. This is the embarrassment that many owners currently encounter after renovation. Because no one can think of the need for sockets in the base cabinet, but now many gas alarms need to be installed in the base cabinet, so the majority of owners are reminded that they must install a power socket in the base cabinet for later use.

2. The kitchen socket should not be too much, generally it should be designed in advance, and the socket should be designed in the place where the discharger is needed, and then you can reserve a five-hole one, and it is not safe to reserve too many sockets near the gas. Range hoods, disinfection cabinets, and gas stoves are all that must be reserved in the kitchen. You can design more hidden sockets, such as setting up a spare socket under the dining table, and you can also leave a socket under the counter basin to install small kitchen treasures or garbage disposers.

3. Usually the kitchen socket can be reserved in this way: it is necessary to have one three-hole socket, which is placed in the corner of the kitchen, which is the exclusive position of the refrigerator; 1-2 five-pin sockets with switches, placed next to the kitchen window directly above the operating table, exhaust fans, range hoods need this entrance; There are 2 three-hole sockets with splash-proof boxes, which should be determined according to the specific situation, such as adding disinfection cupboards, microwave ovens and other electrical appliances to the home.

When we finish the renovation and find that the socket in the kitchen is less, then we should choose to do something better at this time is to repair this thing in time, because this will not cause the risk of electric shock, and this is also a kind of protection for the body. So that's what we need to do.

This is a very, very painful thing, because there are a lot of times when you need to use a plug-in board in the kitchen, your microwave oven will need it, your range hood will need it, and everything you need a plug-in board, so at this time, you can only pull a plug-in board, or call the decoration company to reinstall it for you. Anyway, it's a very, very troublesome thing, so you have to plan it before you renovate.

Then find someone to come and install it, although it is a little troublesome, but it will be more convenient to install independent sockets in the kitchen, because there are many appliances in the kitchen that need independent sockets, such as ovens and the like, I think this is also an undoubted thing.

After the renovation, I found that the kitchen socket is less, I think this is a very bad experience, we can dig another hole in the wall, of course, this will make us very troublesome, we can also take a socket from somewhere else, so it will be more convenient, but it is not particularly beautiful, so it depends on your own choice.

That's probably a big question, don't you be smart enough to get a socket for him? If you don't need it in particular, don't install it again, and if you feel that you need it very much, you can consider asking an electrician to find a way for you to see if you can install another socket? Otherwise, you can also directly pick up a strip of plugs!

This method is the easy way, depending on which method you want to use.

There are two issues involved. One is that the number of preparations is insufficient and the other is that the reserved position is unreasonable, in fact, the position of many kitchen appliances is basically fixed, and the electrical appliances will be placed in accordance with the design of the cabinet, such as de-rowing, water heater, oven disinfection cabinet, dishwasher, small kitchen treasure, refrigerator, etc., it is impossible to change the position, and some small household appliances may continue to increase, and the use of the location may be different, so when reserving the socket, it is necessary to consider more of the convenience of electricity for these small household appliances in these activities, and the solution is to reserve a few more when removing the fixed socketBecause many kitchen appliances are three-eye plugs, it is appropriate to use more six-eye sockets when selecting folding sockets, reducing the number of five-hole sockets, so that the socket can meet the simultaneous use of two electrical appliances, and the spacing of the socket holes should be considered when selecting the six-eye socket, which cannot be too compact, resulting in the inability to insert two electrical appliances at the same time.

1. If the wall of the home is a cement wall, you can disconnect the power supply, then disassemble the socket, and drill a hole of the same size as the switch with an electric drill next to the socket. 2. If necessary, you can drill a few more, and then complete the installation of the bottom box. Next, connect the wires and power supply to each location, so that the socket is installed.

3. If the kitchen socket is not enough, take the open wire to install the socket.

If there are few sockets in the kitchen and many electrical appliances cannot be used at the same time, it is recommended to buy a multi-functional and high-power plug-in board and store it after use.

If you want to solve this problem, first of all, we can choose as long as this situation is solved in ordinary life, first of all, it is best to choose a multi-functional plug-in board when we choose the operation, and we must also do a good job in this protective measures, which will help to solve the problem of inconvenience in the use of various electrical appliances.

This is just a wire that can be connected, find a socket, and it will be much better.

The kitchen is where household appliances are used the most, and various microwave ovens, ovens, wall breakers, and juicers can take up several plugs. How to solve the problem if the kitchen socket installation is missing? How to add sockets in a renovated kitchen? Next, let's take a look.

1. Sockets. The strip plug is the most simple and trouble-free way to vibrate Zheng, but the kitchen smoke is too large, and the strip plug is easy to get oily, and it is more troublesome to clean up. The power cord plugged in at the same time is too long, which is easy to get in the way.

2. Breaking bricks and hiding methods. Measure the required size with a measuring tape first, and mark the wall accordingly; Use a cutting machine to cut the mouth on the tile, and use a percussion drill to clean the cutting edge; Fix the wall box of the socket in the mouth with cement slurry or other adhesive; Once the wall is stable, plug in the socket you want to install.

3. Concealed topstitch method. Place the wire cloth behind the cabinet, and then install some plug seats along the wall next to the cabinet, which is also beautiful for sockets.

I think the best way is to have a socket outside the outside world, so that the problem of fewer sockets can be solved.

You can buy a new long strip separately and install it on the power supply, which solves this problem and meets a variety of needs.

I think the best thing to do is to re-slot and add some sockets, and that will solve the problem.

Feel the way outside a socket, so that the disposal of the penalty socket less results.

Feel the way to re-groove and add some sockets, and this solves the problem.

Decoration design can not be comprehensive at any time, more or less will find some unreasonable design caused by regrets. This is especially true for kitchens that are looking for practicality to the extreme.

There are fewer and fewer sockets on the counter, more and more kitchen utensils, and it is extremely clumsy to use. Most people will choose to insert the line at this time, but the line of the insertion line is in the way, difficult to clean, and there is a certain risk of coming into contact with hot items. This gives rise to the accessible rail socket, which is actually a kind of plug row, but with a track that can be attached to the wall and the socket can be moved back and forth.

It works even better than a socket fixed to the wall. I found that I really like the track – I have a long counter in my kitchen. Spoons, shovels, rags, etc. in the kitchen need to be hung up.

The key to any renovation design is not to hook up the kitchen design. So many people choose to use suction cup hooks or self-adhesive hooks, but this kind of hook is not only ugly, but also easy to fall off, neither of which is the best choice.

In contrast, it is much more convenient to attach a rail hook directly to the wall. Not only is the appearance tall and elegant, but also can be moved freely when used, which is more convenient. There are always all kinds of small corners in the kitchen, and these corners are idle without some waste, and when it comes to using them, it seems that there is no way to use them anymore.

Luckily, we also have narrow-sided cabinets – these very narrow, open, little cabinets are designed for corners. In addition to the kitchen, these narrow side cabinets can also be found in the bathroom, but waterproof products are recommended in both the kitchen and bathroom, as this is a room with high humidity. Cooking a meal can take tens of minutes or hours.

Standing in the kitchen all day can be exhausting. But in fact, cooking doesn't have to be done all the time, we'll have a certain amount of time to wait – maybe only three to five minutes, but let's sit down and rest for three to five minutes and we'll feel less tired.

At this time, you can buy some multi-functional sockets, there are many multi-functional sockets, one can be plugged into a lot of plugs, you can plug this socket into the socket on the wall, so that you can use a lot of electrical appliances at the same time, and it will not cause unsightly phenomena to the kitchen because of the use of wired appliances.

It is possible to observe the wiring route in the kitchen and make a plug and drop in each corner of the kitchen, but it is necessary to consider the implementation situation.

Three scenarios:

1. Patch board, not recommended.

2. Connect the open wire socket, which is not beautiful.

3. Change the perforated panel, such as five holes for ten holes (double five holes). There is no transformation, just change the panel.