I set up wifi on my laptop but I can t connect

If you can connect directly without routing, you can restore the original route and then set up the route from the new one, pay attention to connect those wires correctly, enter the routing settings, password and wireless password! Does your computer have a wireless switch? If you have it, remember to turn on the switch, or if it doesn't work, you can ** a wifi connection software!

Hahaha! ··

Is your wireless router connected correctly? If it's correct, then go to the routing settings or not? Correct wiring and set-up:

1. Make a physical connection first, connect the network cable coming in from the outside to the WAN port of the router, and then set the address of the computer to automatically obtain the IP address.

2. Enter it in the address bar of the browser or find it in the password manual of the login. This brings you to the routing settings screen.

3. In the routing setting interface, select your connection type in the WAN port settings, if it is on ADSL dial-up, select PPPoE, fill in the Internet account and Internet password, if it is on the IP, then select the static IP, fill in the IP address: Subnet mask: Default gateway

4. Finally, open the access point in wireless mode, and the iPad can be WIFI Internet access, which is generally turned on by default. You can not set it, if you can't check it again.

5. In order not to be rubbed off the network, set the WAP2-PSK password in wireless security.

After the settings are correct, the computer no longer needs a broadband connection to access the Internet, and you can access the Internet directly by opening the web page. Because routing has replaced dialing.

This is because the route is not set up and the network is not working.

1.Problems with network settings. On a computer, some options in the network settings may have been changed or misconfigured, resulting in the inability to access the web page properly.

You can check the network settings options, reset the configuration or change it to basic network settings, and try to connect to the internet.

2.DNS issues. In some cases, there may be DNS resolution issues that prevent a particular web page from being opened. In this case, you can try changing the DNS server address to resolve the DNS resolution issue.

3.Firewall issues. Firewalls can block access to certain web pages, as well as access to specific ports and services. You can try disabling firewalls and other network security software to see if the issue is resolved.

4.Virus and malware issues. Occasionally, your computer may be infected with a virus or malware, which may interfere with your network connection and prevent you from accessing the missing web page. It is recommended that you use antivirus software to perform a comprehensive scan and clean of your computer.

5.Weak wifi signal. If the Wi-Fi signal is weak, the webpage may not open. In this case, you can be close to the wifi router or a location with a strong signal.

Overall, these issues sometimes lead to the inability to access web pages. You should rule out these issues one by one and try to fix them. If the problem is not resolved, it is recommended that you contact your network administrator or vendor technical support department for assistance.

Hello landlord, if you are already connected to wifi, but you can't access the Internet, then it is likely to be a problem with the network, check the router and modem.

Workaround:1Enable the traffic monitoring feature to see which software is taking up your internet speed.

2.Go to the traffic management page of the router gateway to check which device occupies the highest network speed and record it.

3.Go to the DHCP page of the router gateway and check whether there are any unknown devices connected to the network. Record the MAC address of the device and disable its network access through MAC filtering in advanced settings.

4.Turn off the router for 5 minutes and check whether the line connection is normal.

5.Keep your wireless router away from electromagnetic devices. Shorten the distance between network equipment and wireless routers, reduce the possibility of signal attenuation and interference, and increase wireless relay amplification to expand WiFi signal coverage.