The computer router, the mobile phone can be connected, the computer can t be connected to the netwo

Causes of Application Errors:

1. Caused by viruses and Trojans, because the svchost process starts various services, viruses and Trojans also try their best to use it, trying to use its characteristics to confuse users, making svchost a puppet process of the virus, and carrying out virus operations, so as to steal a large number of Trojans and steal user information. Kingsoft Guardian can be used to kill Trojan viruses and Trojans.

2. If the registration information of the IE component is destroyed in the registry, the problem of re-registering the IE component information can be solved.

3. If the computer has a printer, it may also be because the printer driver is installed incorrectly, which will also cause an error, as long as the printer driver is reinstalled, it can be solved.

4. If some software conflicts with you, the solution is to uninstall the software or upgrade the software to the latest version.

5. Now most netizens like to use the ghost system, cracked version of the system, but the use of these systems may have incompatible factors, which can easily lead to errors, and the best solution is to install and use a genuine operating system.

You're having a problem with the connection. LAN port access is equivalent to a switch, the computer is wired, which can be accessed, but the wireless of the mobile phone cannot be used.

The network cable should be connected to the WAN port of the router, and the WAN port of the router should be set to dynamically obtain the IP (if the unit is a static IP address, enter it according to the IP address of your computer). Note that you must first change the LAN port address of the router to a different network segment from your organization. If your organization uses a network segment, you need to change the LAN port address of the router to the network segment first.

Otherwise, the router will not be able to get the address automatically. Note that the computer IP address is set to be obtained automatically.

Hello dear and happy to answer your <>

Kiss why I have a mobile phone network after connecting to the computer on the router but can't access the network for the following reasons: 1. Call the broadband operator for broadband arrears, check whether the network is in arrears, and pay the fee when the network is stopped in arrears. Reason 2: If the network cable on the router is not plugged in, if the network cable of the WLAN port of the router is dropped, then plug it back in.

I hope this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you again. Wishing you well; Happy life, everything goes well [warm] [warm].

Problem 1: All WAN port parameters are 0 and the connection is always in progress, but the connection cannot be successfully (log in to the management interface of the router and click Running Status >> view the WAN port status);

Solution: 1. Check the line, if the line is connected correctly, but the WAN port indicator is not on, please check whether the WAN port wiring is in poor contact, etc., and try to replace the network cable connected to the WAN port;

2. Confirm that the password is entered correctly, click Running Status >> WAN port status on the management interface of the router, if the WAN port does not get the IP address, the page will have a prompt for the reason of dialing failure, modify it according to the prompt;

3. The broadband service provider binds the MAC address, connects the computer that was connected to the broadband Internet access separately with the LAN port of the router (here it must be connected by wire), and logs in to the management interface of the router. Select Network Parameters >> MAC address clone, click Clone MAC address. When the MAC address is the same as the MAC address of the current management PC, click Save and Restart the Router.

Solution: 1. The computer needs to be set to automatically obtain the IP address - if the computer has automatically obtained the IP address, but the IP address obtained, please disable the local connection or wireless connection corresponding to the computer and then enable it.

2. Check the router's Internet access control - the router's parental control, hunger vertical network control (some routers are set by firewalls) function can restrict the Internet access permission of the intranet computer, please set the function according to the actual needs, if it is not necessary, you can not enable the function. Here's how to set it up:

1) Turn off Parental Controls - Log in to the router management interface, click the Parental Controls settings page, select Disable and Save.

2) Turn off Internet Access Control - In Security Settings >> Internet Control, make sure that Turn on Internet Control is unchecked, and click Save.

3. Check the browser settings - please check the browser settings, the check method is as follows: Disable dial-up connection: Open IE browser, click Tools >> Internet Options, select Connect>> never dial-up connection; Disable the network on behalf of rotten Dali:

Click Tools >> Internet Options, select Connect >> LAN settings, make sure none of the three options are checked, and click OK.

After setting up, try to open the browser to surf the Internet;

4. Change the browser or computer - try again after changing the browser (using Firefox, Google Chrome or other browsers), if you still can't access the Internet, try to change the computer for comparison and testing;

It should be reset, just reset it.

You have to dial this thing, you can't help it!

This question is so strange, how can the mobile phone be able to access the Internet has anything to do with the computer turning on and off? The router didn't turn off again! I guess the problem is not with the computer.

Set a secret on the route, otherwise anyone can use it.

You have to be clear: connecting a phone to a router is not the same thing as connecting to the Internet, and connecting to a wireless router does not mean that you are already connected to the Internet.

If you want to use your mobile phone to use broadband Internet access at home, there are two prerequisites: the wireless router is connected to the Internet, your mobile phone is connected to the router and you have obtained the correct IP address.

A lot of people think that I can surf the internet just by connecting to a wireless router, and that's wrong. The phone's network prompt only indicates that you have logged in to the router, not that you have logged in to the Internet.

There are two ways to access broadband Internet at home: the way that does not require login verification and the way that requires verification to log in, such as ADSL which requires login verification.

If it is ADSL mode, the correct settings to access the Internet: turn on the router with a computer, and set up a username and password in the router to ensure that the router is connected to the Internet as soon as it is turned on, at this time, your mobile phone and iPad can access the Internet as long as they are connected to the router.

Some people don't understand this, don't make any settings in the router, turn on the computer and run the broadband client to surf the Internet, this way, of course, the certified computer can be on, but other devices such as mobile phones and ipads that do not run the client will not be able to access the Internet because they can't complete the authentication.

If you use the ADSL Internet mode, you generally need to complete authentication before you can log in. This process can be done either by a computer or by a router.

If you do it with a computer, only this computer will be able to access the Internet, but other devices connected to the router will not be able to access the Internet.

If you do it with a router, all devices connected to the router will be able to access the Internet.

First, find your wireless router, and then click to enter the password you set before, if you set a password, it will go directly.

Enter the password, the same password as in the router settings, and you can connect if you are right.