I bought a headset, but I don t know how to burn the machine, so I ask the master to explain

The burn-in is suitable for mid-to-high-end headphones, that is, headphones up to 300 yuan, and the higher the **, the greater the gap before and after the burn-in.

Let's talk about the principle first, when the headset is working, the internal coil or circuit is working, as long as it is working, it will heat up, and the heating will lead to certain changes in the internal coil and circuit (not aging, but the finalization of the use state), such as line softening, coil resistance, electromagnetic compatibility between circuits, etc.

It is precisely because the earphones will undergo various expected changes inside after working for a period of time, so when designing the earphones, in order to finalize the shape (after boiling) the earphones have a more perfect performance, so the design is deliberately designed in the opposite direction of change at the design time, so that it is just right after the cook. All a lot of headphones will be of higher quality after cooking.

Then I will tell you about the method of burning, the so-called burning, is to plug the earphones into the sound source, fatigue**, and promote the earphones to complete the use of the finalization as soon as possible. The specific burn-in is divided into two categories, one is the balanced burn-in method, which uses a special histosquare wave type of sound source or multiple types of sound sources to burn the machine with the full frequency band of sound. To stereotype the headphones in the direction of balance, there is also a type of burner that tends to use the sound source of your favorite style to cook, and it is said that such a good headphone is more suitable for listening to yourself.

The two methods vary from person to person. It depends on your choice, but the so-called burn-in is actually to fatigue the headphones with a sound source of sufficient power**, 8-12 hours at a time, after a total of 24-40 hours, the headphones can be boiled for 7-8.

A good headphone burn-in is very important, just like a good car also needs careful running-in, if the headphone is not good, it will not be able to show the sound quality it should have. So how to burn the machine, you need to pay attention to the following points. 1.

The headphones are burned in for about two weeks from the first time they are first used. 2.During the burn-in process, the volume should be kept at no more than 33%.

Adjust the volume slowly when turning on the machine to prevent damage to the diaphragm. 4. For the first week of cooking, try to use soft **, do not choose electro** or rock. 5.

After about a week, use pop alto** (rock dance music is not good) to cook at a low volume for about a week. 6.It is best to boil for about two hours a day for these two weeks.

Well, that's basically the process.

It's best not to use extreme cooking methods. For example, with software.

Or, just listen to what you like** and witness the sound of the headphones getting better day by day.

Just bought it, listen to it. Even if you don't listen every day, open for 2 or 3 hours. It's good for headphones. But don't take too long.

It's simple. Just listen to it. I don't know if you are headphones or earbuds, the earphones will be boiled for a little longer, generally a month, especially high-end headphones, such as HD650. Earbuds, a week is fine.

1. Before cooking headphones, you should first understand the principle of headphone burning. The burn-in machine is made by making the paper cone in the headphones vibrate continuously, so as to emit the best amplitude and frequency. When cooking, take out the earphones and plug them into the headphone jack of your phone.

2. When you start to burn the machine, you need to have a lower frequency. Open the **** and choose some more soothing', such as pop, r&b, country, folk, chinoise, etc., for 6 to 7 hours in a row.

4. In the middle of burning, you need to have a higher frequency. You can be in the **** device, **some fast-paced**, such as rock, hip-hop, jazz, electronic, etc., for about 5 hours in a row.

5. In the later stage of burning, you can alternate **various frequencies**. You can choose from a variety of different instruments and languages. It does not need to be continuous, and can be interrupted for about 12 hours.

6. In this way, the headphones are basically cooked, you can listen to songs at will, and after about a week, the headphones can reach the best state.