What kind of glue is used to paste the general outdoor small advertising paper?

White latex. As a water-soluble adhesive, regular white latex is made of vinyl acetate.

It is the main raw material, and the emulsion liquid produced by a series of chemical processes.

It is widely used in furniture manufacturing, wood processing, building decoration, leather, printing and binding, paper-plastic composite, fabric finishing, cigarette manufacturing, coating base emulsion, and cement mortar.

For exterior walls, veneer repairs, wall caulking, and for blockboarding.

Splicing, veneer repair, plywood repair and secondary processing of wood-based panels.

Vinyl acetate monomer is polymerized under the action of initiator.

and a thermoplastic adhesive to be prepared. It can be cured at room temperature, curing fast, high bonding strength, and the adhesive layer has good toughness and durability and is not easy to age.

1.Paper sticks to the tiles :

The cost is low, the operation is simple, and the choice can be slightly better double-sided tape or foam glue.

2.Glued to uneven surfaces: The general outdoor small advertising paper is made of "white latex" or "self-adhesive"!Mainly look at the paste area, large area, use white latex, small area with "sticker" and is the operation, white latex to brush, sticker directly.

3.Those who are afraid of water and rain: use liquid glue (or super glue, such as 101 Jiaowang) quick-drying super glue.

The general outdoor small advertising paper is made of "white latex" or "self-adhesive"! It mainly depends on your paste area, large area, use white latex, small area with "sticker" and is the operation, white latex to brush, self-adhesive directly paste, look at your considerations!

Environmentally friendly PP synthetic paper can generally be used. Conventional width, etc.

Normal advertising companies will be coated with a layer of transparent PVC protective film, which is divided into three types: light film, sub-film, and fog film, one is to play a protective role, and the other is to enhance the texture of the picture.

The adhesive-backed PP synthetic paper is greatly affected by temperature, and is not resistant to high temperature, and deformation will occur at high temperature; It is also not resistant to low temperatures, which can shrink slightly and cause curling. Therefore, the general adhesive-backed PP synthetic paper is used in the KT board for short-term use. It is not suitable for long-term outdoor display of display shelves.

The market can be the best specification width is generally ,,, four conventional width, at present, Shanghai Lichuan has been able to **2 meters width of adhesive and pp paper, mainly affected by the machine. There are -1 and -2 sizes of these types, so please pay attention to the distinction when purchasing.

Outdoor body stickers are generally used to be more durable. How can paper?

Purchase two sheets of outdoor sticker paper from Mimi.

Environmentally friendly PP synthetic paper can generally be used. Conventional width, etc.

Acrylamide glue formulation.

Polyvinyl alcohol: 10-12 kg;Tap water: 100 150 kg;Acrylamide: 10-12 kg.

Amine persulfate (initiator): 22-80 g;Formaldehyde kilogram production process:

1.Add 100 150 kg of water to the reaction kettle, raise the temperature, start the mixer when the temperature reaches about 55 and add 10 12 kg of polyvinyl alcohol, continue to heat up, stop heating when the temperature reaches about 98, keep warm and stir until the polyvinyl alcohol is completely dissolved, add 1 kg of formaldehyde and stir evenly.

2.Add 10 12 kg of acrylamide under the condition of stirring (10 12 kg of acrylamide please dissolve with 40 kg of water first), stir well 3When the temperature is adjusted to 62 70, slowly add 22 80 grams of initiator persulfate amine while stirring (22 80 grams of persulfate amine should be dissolved with 400 480 grams of water first), stir well.

Glue type: cross-linked resin adhesive.

Main components of glue: polyacrylate;

Rosin resin. Physical form: colorless transparent liquid (rosin resin is milky white liquid).

Viscosity types: micro viscosity, low viscosity, medium viscosity, high viscosity, ultra-high viscosity five series.

How to use: Bonding (i.e. coating) to the surface of PET, POPP, kraft paper and other materials at high temperatures

Solid content: 40-2%.

Scope of application: It is widely used in the surface protection of building decoration plastic plates, stainless steel, aluminum profiles, color steel plates, glass plates, home appliance industries and other materials.

Product features: good stickiness, no stickiness, easy to peel, aging resistance, no residual glue, high temperature resistance, easy storage.

Glue formulation. PVC material is a type of plastic decorative material. PVC is the abbreviation of polyvinyl chloride material, which is made of polyvinyl chloride resin as the main raw material, adding an appropriate amount of anti-aging agent, modifier, etc., through mixing, calendering, vacuum blister and other processes.

PVC material has the characteristics of light weight, heat insulation, heat preservation, moisture-proof, flame retardant, and easy construction. There are many specifications, colors and patterns, which are highly decorative, and can be applied to the decoration of interior walls and ceilings, and are one of the most widely used decorative materials in plastic materials. HDPE is a highly crystalline, non-polar thermoplastic resin.

The appearance of the original HDPE is milky.

It is white and has a certain degree of translucency in a thin cross-section. PE has excellent resistance to most domestic and industrial chemicals. PSP stands for PlayStation

Portable, is a new handheld game console developed by Sony. It was officially released on December 12, 2004. It uses inch 16:

9 ratio, backlight full transparency Sharp ASV ultra-wide viewing angle TFT LCD screen, the screen size reaches 480*272 pixels, and the colors are bright and bright, and the display effect is first-class.