The oil is too much, and it exceeds the upper point of the scale, how to get some out

Hello, if the oil only exceeds the scale point on the dipstick, this basically has no effect, if you want to get it out, you can use the leather tube or go to the repair shop to ask them to help you pull out the point.

Hello car owner, you can loosen the oil screw and put it out a little when the oil is filled more, or you can use the pumping unit to pull out the oil dipstick casing, more oil will lead to high oil pressure, high fuel consumption, damage to the three-way catalysis and engine seals.

Hello, this oil is too much, this can be sucked out with a large syringe connecting hose, and the engine will be weak if the oil is added.

Hello, if the oil is too much, if you exceed the upper and lower scales, you can find a plastic tube to pull out some.

Generally speaking, if the oil is added more than the maximum scale mark, it is basically enough to pump it out a little with a leather tube.

Hello, if the oil is added too much, and the oil dipstick is over, you can use the pumping machine to pump out the oil.

Hello, this oil needs to be checked in the case of cold cars to be accurate! If it exceeds it, just suck it out a little with a strip!

Hello, you can use the pumping machine to pump out your oil a little or put a little bit

You can go to the 4S shop and let them draw a little out.

The treatment method is to first find a needle and a tube that is usually used for hanging needles. Then start pumping through the hole in the oil scale, but this method will be more strenuous. If you can't find the tools for this method, you can also use a bottle of shampoo to solve the problem.

If the oil is added too much, there will be a phenomenon of burning the engine oil. Because the pressure increases due to the increase of oil, the amount of fuel injected through the piston ring will increase, and the oil vapor through the forced ventilation of the crankshaft will also increase, so that the pressure of the oil-gas separator will increase, and the separation will not be complete, resulting in a large amount of oil entering the throttle valve through the exhaust pipe to re-participate in the combustion, so there will be a situation of burning the engine oil.

And the residue of the combustion of the engine oil (the main component of which is carbon, which is very hard) can accumulate on the combustion chamber wall, reducing the combustion chamber space and thus the compression ratio of the engine.

At the same time, it will also accelerate the wear of cylinders and pistons, thereby reducing the service life of the vehicle. There is also the phenomenon that the sound will be significantly louder than before. Because if the oil is added, the resistance of the engine will increase, resulting in poor power response, so the noise will increase.

It's okay, as long as it's within the scale range, it's okay whether it's the upper scale or the next scale, of course, it's best in the middle scale.

Of course, if the oil is added more than the upper limit of the oil dipstick, even if it is added, generally most of our small cars if the old oil is cleaned, the new oil needs to be added between 3L and 4L, that is to say, a barrel of 4L engine oil, we should still have a bottom left.

Don't exceed 1 mile and it's fine, too much will affect the power... Prone to oil leakage.

As follows:

1. It is best not to exceed the upper line, adding more oil has an impact on the power of the engine, increasing the resistance, and returning the oil, if it is serious, it will also cause the vehicle to burn the oil, it is best to let go a little.

2. Too much oil will increase the rotational resistance of the crankshaft, reduce the output power of the engine, and the excess oil will enter the combustion chamber to participate in combustion, causing the vehicle to burn oil, emit blue smoke, and increase fuel consumption.

3. The residue after the combustion of the engine oil (its main component is carbon, which is very hard) will accumulate on the combustion chamber wall, reduce the combustion chamber space, thereby reducing the compression ratio of the engine, and at the same time, it will also accelerate the wear of the cylinder and piston to reduce the service life of the vehicle. Therefore, when adding lubricating oil, it is advisable to keep it slightly lower than the scale on the oil dipstick.

4. The correct way to add engine oil: choose a flat road surface when checking the engine oil to ensure the accuracy of the inspection. In the cold state, check the oil level through the engine 15 minutes after the engine is turned off.

Through the oil dipstick inspection, take out the oil dipstick before the inspection and wipe it clean with a paper towel, which is more convenient for observation. The dipstick has two labels, which should normally be between the lines.

After all, the upper and lower engraved lines are the limit positions, and these two points should be avoided as much as possible.

If it is exceeded, it is not a big problem. But size is also a hidden danger of violating the norm.

The dipstick level in the picture below should be a good example

It's not good to add more, and it may burn the engine oil. Schmoch engine maintenance.

If the oil level exceeds the maximum scale of the dipstick, it is recommended that the cyclist put a little oil. If the oil level exceeds the maximum scale, it will increase the resistance of the engine while running, which may lead to damage to the three-way catalytic converter.

Engine oil is known as the blood of the engine and plays a role in the engine for lubrication, cleaning, sealing, heat dissipation, buffering, and rust prevention.

If the engine is without oil, the engine will not work properly.

The oil level should not be higher than the maximum scale, otherwise the internal resistance of the engine will increase and the three-way catalytic converter may be damaged.

When you usually use the car, you must maintain and change the engine oil regularly.

If you don't change the oil for a long time, the oil will oxidize and deteriorate, so that the oil will not provide enough lubrication to the engine.

Long-term use of engine oil will dilute it, so that when the engine is working, the oil will not form a stable oil film on the surface of various parts in the engine, which will aggravate the wear of the engine.

Therefore, it is important for the rider to maintain and change the oil on time, which is very important for the engine.

Replace the oil with each oil change along with the filter cartridge.

If you add too much oil to your car, you can put the oil out.