What should I do with my computer, hurry!

There is a problem with the system, the antivirus software does not work, reinstall the system, if the original system has a restore wizard and a one-click restore, just restore it.

Your computer is the same as the original, and you have a virus called anti-virus software, which is particularly sensitive to the word antivirus, and even if you install anti-virus software now, you can't open it.

The only way to do this is to start a backup.

Restart the computer, keep pressing F11, a box will come up, and then the computer will prompt you to start the backup.

Could it be that the panda burns incense? Next 360 Security Guard, next Kaba. If you can't get down, use the portable hard disk to upload. Or reinstall the system with a trick.

I've seen this virus.

My classmate got it, and I helped him do it.

Unless you know a lot about viruses and know how to remove them manually.

If not, it is recommended that you format the C drive, install the anti-virus software immediately after redoing the system, and then perform other operations after the anti-virus.

Otherwise, your computer may be poisoned again if the system is installed.

It is recommended to reinstall the system, which is most useful for people who do not understand computers.

It's definitely a virus.,If you really don't understand it, just remove the C drive and reinstall it (backup the useful things of the C disk),After installation, you want to have the next antivirus software (I'd rather put it without using it.),Full antivirus.。

It is recommended that 360-Kaba, of course, can also be reinstalled, press F8 to enter safe mode when the system starts, and then install antivirus software with the disk to fully disinfect the virus.

If it doesn't work, use the antivirus software in the system disk to kill the virus directly under DOS.

I used the disk to install anti-virus software, and the installation screen just came out, and it was automatically closed.

100% poisoned.

You either need to find someone who knows something to help you install antivirus, or you can reinstall the system.

If you can't find the hard drive that booted up, plug the hard drive data cable and power cable again.

bootmgr boot failed, reinstall the system, or try to boot into the system using another tool disk to see if it can fix the system boot!

If the MBR of the hard disk is damaged, you need to use a USB flash drive or a CD-ROM PE boot disk to repair the boot boot and rebuild the boot record (MBR).

Prepare a USB flash drive or CD-ROM PE boot disk and plug it into your computer.

Turn on the power and press the start shortcut button.

Select a USB flash drive or a CD-ROM PE boot disk to boot into the PE interface.

Select Win8 PE to enter the PE desktop, open the partition tool Disk Genius, select the hard disk with the right mouse button, and click Bad Sector Detection and Repair.

Use the right mouse button to select the hard disk, click Rebuild Master Boot Record MBR back to the PE desktop, click Windows Boot Repair, and select C drive to repair.

Unknown hardware error, I remember last winter my laptop froze and this happened! Later, when the warmth came, it was fine. If you keep doing this, you have to consider whether the hardware is not plugged in properly, or something else.

Unknown hardware error, go to the computer city and find a computer repairer to show you.

Analysis: This screen appears because the hard disk file was damaged due to the last abnormal shutdown, and the system is now detecting and repairing it.

Processing: 1. The only thing the user needs to do is: wait patiently for it to finish, and it will automatically restart when it is completed. If you can't get into the system after restarting, you need to reinstall the system.

2. If you need to enter the system in a hurry, you can also press the ESC key to skip the automatic repair and enter the system directly when the automatic repair screen appears, but the next boot will still need to be automatically repaired, and often skipping the automatic repair is easy to cause damage to the hard disk.

3. If this screen often appears, there may be more fragments or bad sectors in the hard disk, and you need to use the system U disk or CD to start the computer, and use special tools such as diskgen to detect and repair the hard disk. If the repair doesn't work, you need to replace the hard drive.

This is the system self-test, waiting for the self-test to complete into the system.

The reason could be that the system is corrupted or the partition where the system is located is not activated.

To re-install the system with a CD-ROM drive, you first need to go to COMS and set the first boot to CD-ROM, so that when you turn on the computer, it will boot from the CD-ROM instead of the hard drive.

2.This prompt may cause the hard drive to be corrupted. You can use a tool such as "HDTune" to check your hard drive.

If you rule out the hard drive, it is likely that there is a problem with the BIOS settings, and you can try to restore the BIOS to the default settings. There is also a case where the system fails, and if so, generally reinstalling the system can solve the problem.

Steps to find the cause.

1.Check to see if the hard disk is blocked in coms;

2.Made with anti-virus software"First aid plate"to boot up the computer and ship a virus scan, and if the problem is caused by a virus, it can be resolved smoothly.

3.If this doesn't work, you can use the chkdsk command under dos to check the hard disk, but your format can't be NTFS, otherwise there are many commands under dos that can't be used. If you really can't do it, you can format the hard drive and reinstall the system.

4.If it still doesn't solve the problem, you have to take the hard drive to a professional for repair.

No operating system found.

This kind of problem, first of all, depends on whether the hard disk can be found, if you can't find it, the hard disk is broken, or the data cable is not in good contact and other reasons.

If you can find the hard disk and reinstall the system, there is also a possibility that the boot partition in the BIOS settings has changed, and the operating system cannot be found in the default partition.

If you don't understand, take the computer to the store for about 50 yuan to install one.

The tip is to the effect that the operating system is not found, if it was normal before, unplug the U disk and eject the disc and then boot it to try, and also out this prompt, enter the BIOS to see if the hard disk is normally recognized, and reinstall the system.