How to improve the performance of your graphics card x800

Your graphics card is terrible. I want to raise and buy a new one.

The x800 is basically a 5-year-old product, and it can be considered for replacement.

Overclocking doesn't make much sense either.

Your PC is performing well overall.

But the graphics card is terrible.

So you say no problem, that's a fake

The performance of your graphics card is simply garbage for today's 3D games, and it is a waste to match such a good CPU with a garbage graphics card.

It is recommended that you buy a 5750 with an A card or a GTX260 with an N card (no matter how high your CPU is, it will be wasted if you can't play the performance of the graphics card, and if it is low, I'm sorry for your CPU.)

However, if you don't have that much budget, it is reasonable to reduce it a little, and it is recommended to use a minimum of 9800GT for N card or 4750 for A card).

After changing the graphics card, your problem is solved.

1. Upgrade to a better graphics card2

Overclocking... Get better performance.

The performance of the graphics card is still mainly determined by the hardware. If you want to play high-end games, a good graphics card is a must, and it's not something else that can be replaced.

Personally, I feel that the use of software, as well as drivers and upgrades to DirectX does not play a big role.

Overclocking is really troublesome, so try upgrading the driver. If not, it is recommended to change the card.

There are 2 options.

1: Check if the motherboard supports a discrete graphics card and add a graphics card.

2: The next latest graphics card driver will be slightly improved, or go to the BIOS to share the settings and allocate more video memory.

Remove unnecessary effects from the graphics card's control center.

Find the best driver for your graphics card (the latest driver isn't necessarily the best).

Pay attention to the heat dissipation equipment of the graphics card, and it is best to clean it up to prevent dust from interfering with heat dissipation.

Soft, super, hard, and super can be.

If you don't know about hard super, it's best not to try.

The next software can be soft and ultrasound.

Even if the operation is not done properly.

It also does not cause hardware damage.

It's something that works well even without overclocking.

You can go to the BIOS to change the graphics card display to a switchable graphics card, of course, there is also a premise that the machine is a dual graphics card machine, which can effectively improve the utilization rate of the graphics card;

The correct use of the graphics card and the improvement of performance need to be assisted by the graphics card driver, the graphics card to improve the performance is first of all to install the correct driver is very important, the general program is on the machine's own CD-ROM on, you had better choose the CD driver, so it is more suitable for the use of the computer;

If the graphics card of the desktop is an independent graphics card, the graphics card can generally be replaced, which can improve the performance of the machine, while the notebook used is not, and the all-in-one computer cannot replace the graphics card;

The operation of the game is directly related to the hardware configuration of the machine, such as CPU, memory, and independent display core, as well as the system, drivers, and other software. At present, whether you can play a game, you first need to check the configuration requirements of the game and the configuration requirements of the machine to make a comparison to see whether the configuration of the machine is compliant. If the minimum running requirements of the game can be met, it can be supported. "

The A-card can adjust the fan speed by a catalyst drive.

First of all, taking AMD's graphics card as an example, you can use the driver of the AMD graphics card, which is commonly known as CCC, referred to as catalyst, to adjust the speed of the fan. First, right-click to select and open the A-card drive catalyst panel. Then select the menu item ATI Overdrive, which is a dedicated information detection and overclocking tool integrated for players in the A-card driver.

The first step is to open the standard CCC drive control panel.

Step 2: Select the ATI Overdrive option.

As you can see from the diagram below, the graphics card has automatic fan speed control by default. The section enclosed by the red line shows that the current fan speed is 40%, which is 40% of the fan speed when it is running at full speed. You need to check the "Enable manual fan control" checkbox and try to pull it to 100% so that as long as you don't change the fan speed, the fan speed of the graphics card will always be maintained at 100%.

After this operation, when the fan speed of this HD5750 graphics card is increased from 40% to 100%, the GPU temperature drops from 45 degrees to 40 degrees, which is very effective.

The rotational speed is 40% before manual fan control is activated

By the time I manually adjusted it to 70%, the temperature had dropped by 2 degrees.

The n-card can use third-party software to adjust the fan speed.

Now when it comes to NVIDIA graphics cards, it's actually easier to manually adjust the fan speed with N cards, because you can directly use the NVIDIA Inspector software to adjust it. This is a software dedicated to N-card detection and overclocking, which not only provides fast graphics card information detection like GPU-Z, but also enables N-card overclocking frequency and fan speed setting. The same is to open the software to enter the interface, click "Show overclocking", a dialog box will pop up, don't worry about it here, just select "Yes".

Then we can see the "fan" item in the interface, and remove the small hook in the box in front of the "auto" below, so that we can manually adjust the fan speed. Then turn the fan speed to the highest. Finally, remember to click on "Set Fan" so that the fan speed will change.

Open the hidden overclocking panel.

Manually modify the fan speed you need.

In the face of a graphics card heatsink that costs one or two hundred yuan at every turn, fixing the fan speed of the graphics card to 100% is very effective in reducing the temperature of the graphics card when gaming, and the operability is also very strong, and the most important thing is that it is free. While the noise emitted by the graphics card may increase as a result, a lot of sound effects while gaming can drown out the noise, and the focus is on the game, so it's not a big deal.

The performance improvement of the 945G integrated graphics card itself is very limited, and I don't know if you are playing games or what design you want to do, but the best way is to add memory, at least upgrade the memory to 2G, and the performance may be relatively significantly improved.

Such a graphics card ......

The drive is installed. Forget about overclocking.

The set uses memory.

If the memory frequency increases, the performance will theoretically increase ......

However, it is not worth the loss, and the super memory seems to be a huge trouble.

Forget about this kind of set.

945G graphics card, this core performance is placed in the first grade, and MX440 is a grade, no matter how you get it, you can't improve it.

You're using an integrated graphics card, and the performance is very low, and no matter how much you toss, it won't improve much, so if you want to improve performance, add a discrete graphics card.

The most effective way to improve performance is to buy a discrete graphics card, and honestly, there's not much room for improvement in the performance of an integrated graphics card!

Updating the matching graphics driver can optimize the performance output of the graphics card;

You can select "Adjust Image Settings by Preview" in the control panel of the graphics card; Select Use My Preferences, focus on "Performance", and click Apply to improve the performance of your graphics card.

。。This "X800" graphics card, if it is the old A card ATI X800, its performance is equivalent to the old N card 7300GT level, and it is slightly higher than the Intel core graphics HD2500 performance.

Overclock with Riva Tuner.

Riva Tunerriva Tuner, an overclocking tool for NVIDIA graphics cards, is a modification tool specifically for NVIDIA graphics cards.

**Address. It includes a lot of features such as graphics card overclocking, OpenGL adjustment, DirectDraw & Direct3D adjustment, desktop and overlay color adjustment Retrieved by Slavic Falcon On the main interface of Ivatuner, you can see six categories of options (Figure 1), namely: Main (Main Settings), Settings (Extended Settings), Power User (Power User), Launcher (Command Execution), About (About), links. Riva Tuner is also very powerful, including detailed tweaking of the graphics card and its drivers.

Click on the small triangle symbol on the right side of the graphics chip model dialog box in Main (Main Settings) and select the first Customize Low Level System Settings option in the pop-up button. Go to the Low Level System Tweaks window and check the Vercloking tab, click Enable Low Level Hardware Overclock to make the following frequency setting slider optional, (Figure 4) Change the frequency value by moving the slider, after adjustment, choose to start the application of overclocking settings in Windows and save this setting. You can also choose the default frequency setting for the last item's restoration.

Note that when dragging the frequency, the riva tuner does not appear on the interface with an exclamation point.

But your graphics card is so old that even overclocking won't improve performance much.

I estimate that your graphics card slot should be agp,If the budget is enough, change it to x800,The performance will be 7 8 times improved,**Estimated to be within 500 yuan。

1.Hard change.

2.Soft reform.

3.Use the acceleration drive.

The graphics card of the previous generation, don't care too much, to be honest, it doesn't play any performance. If you really want the best, just buy a 9800, x800 and use it as a driver, and in the end I found that there is no difference between it and not doing it. My X800 ah, hey, I crushed the GPU by dismantling the fan once, and I resent.

It is recommended that you try the ATI graphics driver from Omega.

Right-click on the computer and select Properties.

In the system interface that pops up, select Device Manager.

63.Then in the Device Manager, select the graphics card, this is what is often referred to as the graphics card, and the graphics card of the machine is displayed in the display adapter submenu.

8. Computer generally refers to electronic computer, electronic computer (electroniccomputer), commonly known as computer, is a modern electronic computer used for high-speed computing. Numerical calculations are possible. Logical calculation, with memory memory function, can be run according to the program, automatic.

High-speed processing of massive amounts of data. It consists of a hardware system and a software system, and a computer without any software installed is called bare metal. Computers are used as control systems for a variety of industrial and consumer equipment, including simple purpose-built devices.

Industrial equipment and general equipment, etc. The computer is one of the most advanced scientific and technological inventions of the 20th century, which has had an extremely important impact on human production and social activities, and has developed rapidly with strong vitality. Its application field has expanded from the initial military scientific research application to all fields of society, and has formed a huge computer industry, which has led to technological progress on a global scale, which has triggered profound social changes, and computers have spread all over ordinary schools.

Enterprises and institutions have entered the homes of ordinary people and become indispensable tools in the information society.

The judgment of the quality of the graphics card should first look at the GPU, and then the data of video memory, process technology, and frequency. For example, in the same DDR3 graphics card, it is necessary to divide the number of DDR3, there are , and there are, the lower the data, the faster the speed.

It's too complicated upstairs, ordinary people who pay attention to these - in fact, the best way to judge the quality of a graphics card is to speculate according to the model, the higher the performance of the general model, the higher the performance, such as AMD's graphics card, HD4670 performance is worse than HD4830, and there are HD4850 HD4870 HD4890 nvidia graphics cards have recently changed their names, for old graphics cards, 9500 is not as good as 9600GT 9600 is not as good as 9800GT The new name of the G100 is not as good as the GT210 GT210 is not as good as the GTS250 GTS250 is not as good as the GTX260, so the judgment is much simpler.

The graphics card uses the chip, the manufacturing process, and the memory specifications.

That's all I said upstairs. Graphics cards in the same price range are compared like this.