ZTE F663NV9 optical modem has two WIFI, how to turn off one?

Log in to the modem and disable the SSID broadcast of the modem.

Introduction: Light Cat.

It refers to a transceiver device that converts optical Ethernet signals into other protocol signals, and optical modems are also known as single-port optical transceivers.

It is a product designed for special user environments, which uses a pair of optical fibers to carry out single E1 or single or single 10Baset point-to-point optical transmission terminal equipment.

How it works: The optical modem is a kind of baseband similar to that.

The device of the modem (digital modem) is different from the baseband modem in that it is connected to the optical fiber line, which is an optical signal.

For use in wide area networks.

The conversion of photoelectric signals and interface protocols, access routers, is WAN access. The photoelectric transceiver is the conversion of photoelectric signals in the local area network, but only the signal conversion, and there is no interface protocol conversion.

Features: The equipment of the optical modem adopts large-scale integrated chips, simple circuit, low power consumption, high reliability, complete alarm status indication and perfect network management function.

Application: Ethernet alone.

Optical modems are mainly used when the distance is longer than 20 km, and the intermediate needs to be transferred through optical transmission equipment such as SDH and PDH.

Generally speaking, the rate of the modem is packaged on a 2m circuit, so the optical transceiver of the modem.

The difference is also in its rate, the optical modem is 2m, and the optical transceiver is 100m

There are two wifi off one of them. First of all, you need to find the modem device, and then check the ** at the bottom of the modem to log in to the mobile phone or computer, and select advanced settings to adjust and turn off in it.

1. Connect a network cable from the LAN port of the optical modem to the WAN port of the wireless router, and pay attention to whether the light is displayed.

2. Link the LAN port of the wireless router to the computer.

3. Open the webpage, follow the router manual, enter the login, and enter the account password.

4. Follow the prompts in the pop-up window, change the type to PPPoe in the network settings, enter the broadband account password, and continue to click Next until it is completed.

<>1. Connect a network cable from the LAN port of the optical modem to the WAN port of the wireless router, and pay attention to whether the light shows the residual display.

2. Link the LAN port of the wireless router to the computer.

3. Open the webpage, press the router manual, enter the login, and enter the password for clearing the world.

4. Follow the prompts in the pop-up window, change the type to PPPoe in the network settings, enter the broadband password, and continue to click Next until it is completed.