Is it true that the hygroscopicity of sintering is low?

Is it true that normal rotors have lower moisture absorption? Right? I really don't know much anymore.

I don't know what this is all about, I don't know if it's my younger brother.

Sintered bricks and tiles are made of clay minerals and other natural minerals as raw materials, through preparation, body molding, body drying, firing and other processes, is a polycrystalline, multiphase (crystalline phase, glass phase and gas phase) silicate material. Since its main raw materials are taken from silicate minerals in nature, it belongs to the category of the silicate industry.

With the development of science and technology, the production technology of sintered bricks and tiles is also improving, and its production not only uses natural raw materials, but also uses some chemical raw materials and synthetic minerals, and the composition of raw materials extends to the category of inorganic non-metallic materials. Therefore, sintered bricks and tiles can also be classified as inorganic non-metallic materials.

Sintered bricks and tiles are often named after raw materials, such as sintered clay bricks, sintered shale bricks, sintered coal gangue bricks, sintered fly ash bricks and sintered clay tiles, sintered shale tiles, sintered coal gangue tiles, etc. In the absence of confusion, the word "kiln" may be omitted.

What is Sintered Ordinary Brick?

The appearance of sintered ordinary bricks is right-angled hexahedron, and its size is 240mm long, 115mm wide, 53mm high, no holes or less than 25% of the void or void rate of less than 25% of the fly ash bricks (F); Bricks with qualified strength, weathering resistance and radioactive substances are divided into three grades: excellent (A), first-class (B) and qualified (C) according to dimensional deviation, appearance quality, frosting and lime bursting.

Generally, sintered ordinary bricks are divided into grade A, chain B and grade C. Grade A refers to the domestic standard red bricks, Grade B refers to the temperature of 1000 degrees Celsius when sintering is below the 1000 degrees of the shed is fired into yellow bricks, and Grade C bricks refer to the deformed bricks with a temperature of more than 1260 degrees when sintering.

It is generally called standard brick, also known as red brick (named because of the color).

Red bricks are sintered building bricks made of clay, shale, gangue, etc., which are crushed, mixed and kneaded by manual or mechanical pressing, and then dried and fired at a temperature of about 900 degrees Celsius by an oxidation flame, which was invented by the ancient Babylonians.

It is generally called standard brick, also known as red brick (named because of the color).

There are all in the national standards for algorithms, so don't worry about this. Just check it and you'll find out!

Compressive Strength Mean Sintered Sintered Perforated Brick, Strength.

There are all in the national standards for algorithms, so don't worry about this. Just check it and you'll find out!

Reduce the load of the building, thereby reducing the load-bearing of the building, and saving the construction cost of the load-bearing structure of the building.

Concrete perforated brick 240 wall, mixed mortar,.

Sintered ordinary brick 240 walls, mixed mortar,.

Sintered perforated brick 240 walls, mixed mortar,.

Autoclaved brick 240 walls, mixed mortar,.

Autoclaved perforated brick 240 walls, mixed mortar,. ...