How to use car wipers, how to use wipers

Generally, family car wipers are equipped with standard, fast and slow three gears, which can be adjusted, generally on the right side of the steering wheel. There may be some differences between models.

The manual wiper adjustment method is as follows:

Light rainfall: Don't rush to use wipers when it starts to rain lightly. Spray glass water to moisten the glass before opening it for the first time to avoid dry scraping of the glass window due to lack of moisture.

Heavy rainfall: If the rain is heavy, adjust the working frequency of the wiper in time to ensure a clear vision. If the rain is too heavy and the rain is too urgent, and you still can't see clearly when you drive to the highest gear, it is recommended to find a safe place to stop temporarily and wait for the rain to lighten, and remember to turn on the fog lights and double flashes when parking on the side of the road to avoid accidents.

Use rear window wipers: If your car has a rear wiper, don't forget to turn it on when it rains.

Generally, SUVs, hatchbacks, MPVs and other models are mostly equipped with rear wipers, this is because the rear windshield of the sedan has air flow through, while the hatchback or SUV does not, which leads to the fact that once there is rain, the sedan can use the air flow to blow down the water droplets, but the hatchback cannot, the water can not be blown off in time, it will be easy to stick to the dust, affect the sight of the rearview mirror, and lead to unsafe driving.

Hope, thank you.

It's on the right-hand side of the steering wheel, and it's either pressed down or rotated back and forth.

If there is a switch, just turn on the switch.

The right side of the steering wheel opens to the next gear, 1 slow, 2 fast and 3 faster, a total of 4 gears.

Wipers, also known as wipers, water picks, wipers or windshield wipers, are equipment used to brush and scrape rain and dust attached to the windshield of vehicles to improve the visibility of drivers and increase driving safety.

Just turn on the wiper switch.

What is the meaning of this question? If you want to say how to operate, there is a lever at the bottom right of the steering wheel.

1. Find the wiper controller near the steering wheel;

2. Adjust the wiper stop to the OFF position, and the wiper stops working;

3. When using the wipers, push the gear lever to INT, LO or HI mode to start.

Wiper operation mode: OFF - the front wiper is stopped working, and it can be turned off by rotating to this position. int – automatic intermittent operation.

It is suitable for light rain and snow. lo – continuous work. Suitable for heavy rain and snow weather.

Hi – continuous high-speed work. Suitable for rainstorm weather.

The function of the wiper is to scrape away raindrops, debris and dust attached to the windshield of the vehicle to improve the visibility of the driver and increase driving safety.

Most of the wiper switches on sale are mounted on the lever on the right side of the steering wheel.

The wiper lever, like the light lever, has a lot of functional logos printed on it. Although the logos and logos of different brands are different, the functions are actually the same.

When we take the driver's license, the coach does not teach how to use the wipers, so many novice friends after buying a car, whether it is a manual transmission model or an automatic transmission model, how to use the wiper is not clear, so how to use this wiper?

This one is very simple.

The wipers are on the lever on the right side of the steering wheel and are divided into four gears.

The default setting is to turn off the wipers.

Pull down from the default gear, it is to jog the wiper, that is, manual control, pull it, and the wiper will only move once.

Pull it up from the default gear, it is a long-term wiper, that is, the wiper action every ten seconds, and then move again every other time, which is equivalent to a slow gear.

Pull it up twice from the default gear, which is a short-term wiper, that is, the wiper moves every second, and the speed and frequency are very fast.

1. When the rainfall is not heavy:

If you encounter a light rain or drizzle, you need to spray glass water first, and then open the wiper, because when the rainfall is relatively small, there is not too much rain on the windshield, and after opening the wiper, it is dry scraping, which is easy to cause damage to the car windshield, and also affects the service life of the wiper.

2. When the rainfall is heavy:

When the rainfall is relatively large, it is necessary for the owner to adjust the frequency of the wiper in time to avoid the situation that the line of sight is not clear when driving, if the rainfall is particularly heavy, the frequency of the wiper is adjusted to the fastest or can not see clearly, you need to pull over in time, wait for the rain to be less and then drive, do not forget to turn on the double flash when parking.

Precautions for use:

1. Reduce sun exposure

Especially when parking in summer, the front windshield temperature of the car is relatively high, and long-term exposure to the sun may cause the aging of the wiper strip, try to park in the garage or underground when parking, and try to put up the wipers when parking outdoors. This reduces the contact between the wiper and the glass and prolongs the life of the wiper.

2. Remember to wash the wiper when washing the car:

If the wipers of the car are not used for a long time, there may be some dust and sand on the wipers, which may cause damage to the windshield of the car when it is not cleaned in time when washing the car.

On rainy days, when raindrops fall on the window glass, the view in front of the car is quickly obstructed, and vehicles, pedestrians, and scenery become blurred. At this point, turn on the wipers and the front of the car will be clear.

If you drive the vehicle in rainy weather, the wipers are not used or the wipers fail to work properly, which is very detrimental to driving safety.

1) Before heavy rain, you should check if the car wiper can work properly.

2) In rainy days, rapid and large raindrops hit the windshield glass, even if the wiper moves fast, it is difficult to clean the raindrops, which affects the driver's vision, in order to ensure driving safety, should stop immediately.

For example, the reason why the wiper is not clean: the reason why the wiper is always unclean, the most important thing is that there is invisible dirt on the glass. First, the car is parked at the downwind of the ** air-conditioning cooling water tower, and the cooling water tower will sprinkle the particles after the water tear on the glass to form small white spots, which are difficult to completely remove after drying; The second is that the car is parked under the tree, and the mucus secreted by the insect sticks to the car glass; The third is the mucus of insect carcasses that are crushed by high-speed running for long distances.

Since these things stick to the glass, it is difficult to remove them completely with water and a car cloth (just they can't be seen), forming uneven surfaces on the glass. In this way, when the wiper is used, the glass will not be cleaned. Soak the glass with water and gently touch it back and forth with your hands, if the glass surface is not smooth, it means that there is a foreign object.

When clearing, you can try to wipe it with warm water a few times, and then gently rub it with your hands, or you can use newspapers to remove these difficult to remove dirt little by little, the effect is good, and then touch the glass with your hands after the water is flushed, which is very smooth. At this point, turn on the wipers and give it a try. Very clean scraping.

Car owners with such sunny conditions can try it.

Car wiper switches are mostly mounted on the lever on the right side of the steering wheel, and the style is all lever type. Push the push rod up and the wiper will start working continuously. When you release your hand, the pusher automatically returns and the wiper stops working.

It is suitable for removing a small amount of stagnant water or a little debris in the front block.

Introduction to car wipers.

1.Push the push rod upwards and the wiper will start working continuously. When you release your hand, the pusher automatically returns and the wiper stops working. It is suitable for removing a small amount of stagnant water or a little debris in the front block.

2.Before the wiper stops working, turn the button to the off position.

3.Turn the button to the int for automatic intermittent work. Pull the pusher down one notch and the wiper will automatically work in intermittent mode. This gear needs to be reset manually. Xiaoxue lies in the application of Xiaoyu.

4.Turn the button to "High" for continuous high-speed operation. Pull the pusher down to the bottom and the wipers will work at high speed.

This gear needs to be reset manually, which is suitable for heavy rain weather. Generally, in the case of heavy rain, even if the wiper is turned on at the highest speed, it will not have an effect. The best thing to do is to turn on the double jump lights, pull over and wait for the rain to light up before hitting the road.

Pacific Automobile Network] Most of the automobile wiper switches are set on the lever on the right side of the steering wheel, and the style is all lever type. Push the pusher up and the wiper starts working in a continuous fashion. When you let go, the pushrod automatically returns and the wiper stops working.

It is suitable for removing a small amount of stagnant water in the front windshield or removing some debris on the front windshield.

Introduction of car wipers.

1. Push the push rod up, and the wiper will start to work in a continuous manner. When you let go, the pushrod automatically returns and the wiper stops working. It is suitable for removing a small amount of stagnant water in the front windshield or removing some debris on the front windshield.

2. Turn the button to the state before the wiper stops working.

3. Turn the button to int for automatic intermittent work. Pull the pusher down one notch and the wiper will work automatically with an intermittent start. This gear needs to be reset manually. It is suitable for light rain and snow.

4. Turn the button shed mold to HI for continuous high-speed work. Pull the pushrod down all the way down and the wipers will work at high speed. This gear needs to be reset manually, which is suitable for heavy rain weather.

Generally, in the case of heavy rainstorms, even if the wipers are turned on to the maximum speed, it is not effective, the best way is to turn on the double jump lights, pull over, and wait for the rain chain to slow down before hitting the road. (Photo by Li Linwei of Pacific Automobile Network).

Operate the car wiper: Turn it on after finding the switch, and press the control button to adjust the working frequency of the wiper.

Find the switch of the wiper first, most of the wiper switches are on the right lever behind the steering wheel, and then push the push lever upwards after finding it, and the wiper will start working in a single time, and the downward is continuous work. After a single work is released, the push rod will automatically return to position, the wiper will stop working, OFF means that the front wiper is in a non-working state, and the continuous work needs to be manually dialed up to the OFF gear to stop working.

int stands for the wiper is in the automatic intermittent working state, and pulling the pusher down one grid will carry out the intermittent work of the wiper, which needs to be manually restored. Lo stands for continuous working state, and to turn on this working state, you need to pull the push rod down one more grid, and hi means that you need to pull the push rod to the end in this working state.

Precautions for wipers

1. Keep it clean

Check and clean the wiper blades regularly to keep them clean at all times, when there are streaks on the surface of the glass, the wiper blades may have been dirty, you can sprinkle alcohol on the towel to wipe the surface of the wiper blades.

2. Avoid sun exposure

When the vehicle is not used for a long time, try to park the car in a cool place, as the sun exposure will accelerate the aging of the wiper blades.

3. Check the rubber

When the wiper is working, if the windshield makes a screeching sound, you need to check whether the rubber strip has cracks, wear, uneven places, and if the wear is not very serious, you can use sandpaper to polish the rough spots on the surface.