-
Generally, family car wipers are equipped with standard, fast and slow three gears, which can be adjusted, generally on the right side of the steering wheel. There may be some differences between models.
The manual wiper adjustment method is as follows:
Light rainfall: Don't rush to use wipers when it starts to rain lightly. Spray glass water to moisten the glass before opening it for the first time to avoid dry scraping of the glass window due to lack of moisture.
Heavy rainfall: If the rain is heavy, adjust the working frequency of the wiper in time to ensure a clear vision. If the rain is too heavy and the rain is too urgent, and you still can't see clearly when you drive to the highest gear, it is recommended to find a safe place to stop temporarily and wait for the rain to lighten, and remember to turn on the fog lights and double flashes when parking on the side of the road to avoid accidents.
Use rear window wipers: If your car has a rear wiper, don't forget to turn it on when it rains.
Generally, SUVs, hatchbacks, MPVs and other models are mostly equipped with rear wipers, this is because the rear windshield of the sedan has air flow through, while the hatchback or SUV does not, which leads to the fact that once there is rain, the sedan can use the air flow to blow down the water droplets, but the hatchback cannot, the water can not be blown off in time, it will be easy to stick to the dust, affect the sight of the rearview mirror, and lead to unsafe driving.
Hope, thank you.
-
The icon on the wiper handle along with the meaning of the letter:
Icons – manual work. Push the pusher up and the wiper starts working in a continuous fashion. When you let go, the pushrod automatically returns and the wiper stops working. It is suitable for removing a small amount of stagnant water in the front windshield or removing some debris on the front windshield.
OFF – The front wiper is out of working condition.
int – automatic intermittent operation. Pull the pusher down one notch and the wiper will work automatically with an intermittent start. This gear needs to be reset manually. It is suitable for light rain and snow.
lo – continuous work. Pull the pusher down one notch and the wiper will work automatically at a continuous rate. This gear also needs to be reset manually, which is suitable for heavy rain and snow.
Hi – continuous high-speed work. Pull the pushrod down all the way down and the wipers will work at high speed. This gear needs to be reset manually, which is suitable for heavy rain weather.
-
Wipers, also known as wipers, water picks, wipers or windshield wipers, are equipment used to scrape rain and dust attached to the windshield of vehicles to improve the visibility of drivers and increase driving safety.
-
Spring is coming, the frequency of use of wipers is increasing, I believe everyone usually uses wipers, but do you know what such a complex button scale on the wipers means, are you sure you will use them?Today, I'm going to use all the functions on the wiper lever with you.
-
1. Be sure to use it in the presence of rain. The wipers are the ones that clean the rainwater from the front windshield. If there is no rain, you will not use it, and you must not dry dry scrape without water. Increased frictional resistance due to the absence of water can cause damage to the rubber wiper blades and wiper motors.
2. It is not recommended to use wipers to remove dust on the surface of the windshield. Even if you want to do this, be sure to spray glass water at the same time, and do not dry shave without water. If there is something sturdy on the windshield, such as dried bird droppings, never scrape directly with the windshield wipers, and clean the bird droppings by hand first.
These hard things are very easy to cause local injuries to the thin sheets of the wipers, resulting in the wipers not being able to clean the rainwater.
3. Some car owners feel that there is no need to use special car glass water in summer, which is wrong. In addition to anti-freezing, professional glass water also has the role of cleaning and maintenance. Some car owners make low-quality glass water not only has limited cleaning effect, but also accelerates the aging of wiper blades, and the gains outweigh the losses.
When parking in the summer, it is best to avoid prolonged sun exposure and try to park in a garage or in a shady place. There are also advocates of putting the wipers up when they stop under the scorching sun like when they freeze in winter, to prevent the glass from getting too hot and accelerating the aging of the strip.
4. In winter, the wiper is easy to freeze in snowy days, so after parking in snowy days, the wipers should be lifted to prevent freezing with the front windshield. Do not use the wipers until the snow on the front windshield thaws to avoid damage to the motor. Manually wipe the glass with a damp cloth, or turn on the heater in the car, adjust to the front windshield mode, and wait for the snow and ice to melt before using the wipers.
5. If the wiper has the problem of not being clean, you can tear it into small pieces with sandpaper and wipe off all the dirt on the wiper blade. Pay attention to the strength of the gentle rubbing, with the strength of the slight deformation of the strip, first wipe the middle and then wipe both sides, then wrap the strip on three sides and rub it back and forth, touch the wiper strip with your fingers to feel smooth. In most cases, the effect of the new wiper can be achieved, so you can try it.
6. Clean the wiper blade when washing the car, place the wiper switch at various speed positions, and check whether the wiper maintains a certain speed at different speeds. Check the status of the wiping water, and whether the wiper rod has an uneven swing or leakage. The occurrence of either of these two faults means that the wiper blades are damaged.
In addition, pay attention to whether the wiper vibrates and abnormal noises during work.
-
Wipers are really very common, and many people who drive are familiar with this thing. They said that the use of wipers can also make the windshield of the car cleaner, and can also make people's vision better. Therefore, people also think that it is very good to use wipers on rainy days, which is also the need for people to use them well.
And the wiper also needs to be cleaned frequently, so as to ensure that it is clean, otherwise there will be some bad situations. <>
Wipers are also convenient for people, wipers are still very good, and many people will use wipers in the process of driving. Especially in the face of some bad weather and rainy weather, people also feel that the wipers help them to open up a better line of sight, and also let themselves see things very clearly. Therefore, many people also think that the wiper is a very good thing, which is also hoping that people can use it reasonably.
The wiper is very convenient to use, if some people do not clean the wiper often, it will also lead to the trouble of using it in the later stage. This is also to hope that people can pay good attention to the skin, otherwise some bad situations will happen. The wiper is also very convenient, people only need to gently press the wiper next to the steering wheel when using it, so that it can be used well.
Therefore, people feel that the use of wipers is still very convenient, and it also brings people a good feeling, which has attracted the envy of many people. Lu Que <>
Cleaning the wipers frequently is also a very good thing if people can use the wipers reasonably, otherwise it will cause some bad situations. This is also a very bad thing, so everyone should pay extra attention to use the wiper as reasonably and correctly as possible. It is also necessary to clean the wipers frequently, so as to ensure that people can better use them in the later stage.
If people don't clean it often, it will also lead to some bad situations and phenomena.
-
1.Be sure to use it in the presence of rain. The use of no water will increase the friction resistance, resulting in damage to the rubber wiper blade and the wiper motor!
If something is damaged, it has to be replaced, so it is very expensive. 2.If there are dried bird droppings and other foreign objects on the windshield, do not use the wiper directly to scrape hard, which will easily cause local injury to the wiper bend sheet, resulting in the wiper not cleaning the rainwater.
Remember!!! 3.If you can scrape with a slow speed, you don't need to scrape with a fast speed.
The faster you scrape, the more often you use it, the more times you rub it, and the service life of the wiper blades will be reduced accordingly. 4.Keep the rain scraper clean.
If the wiper blades are attached to sand, they will scratch the glass and cause damage to themselves during operation.
-
If we don't dig the wheel track if we want to use the hanging clothes artifact correctly, then we should use some very soft hairs that change the core of the tung core, as well as some very clean hairs, so that it will be shaved very clean.
-
It should be turned on at the first time when it rains, because only in this way can the normal use of the wiper be better guaranteed.
-
The wiper of the car is a function that needs to be used frequently, if the owner can not use the wiper and the wiper, it will not be able to clean the car glass well, so what is the use of the car wiper?
Different models of wipers use differently, for you to introduce the common wiper use, this wiper control lever has 7 functions.
1. A is the adjustment knob of the wiper, which is used to adjust the frequency of the car's wiper.
2. B is the wiper jog operation function, if you push to this gear, the wiper will scrape a time.
3. C is the close button for the wiper to turn off, and the wiper will be closed when you put the gear here.
4. D is to turn on the wiper automatic adjustment state, and the wiper will change the frequency of wiping according to the amount of rainfall.
5. E and F are the high-speed mode and low-speed mode of the wiper respectively, and the owner can adjust the working mode of the wiper according to his needs.
6. G is the glass water switch of the wiper, the owner pulls the handle inward, and the glass water of the car will also be sprayed out while the wiper is working.
-
Here's how to use it:1. The wiper lever is on the right side of the steering wheel, and the wiper function is operated up and down front and backward to adjust the front and rear wiper gear and frequency.
2. The wiper lever will automatically rebound downward, the wiper will work once, and there are three gears upward: slow, medium and fast, and some models have different designs.
3. When turning off the wipers, push the gear lever down to the OFF gear.
-
<> "The wiper of the car is believed to be no stranger to most car owners, after all, the wiper is often used in rainy days or when the glass is fogged. However, there are some novice car owners who do not know how to use the wipers correctly, so that the glass cannot be cleaned well. In the process of using the car, the stains on the glass often affect the driver's line of sight very much, and it cannot ensure the personal safety of the driver and passengers when driving.
Especially for different types of wipers, they can be used in different ways. However, the common way to use the wiper is basically to control the corresponding function of the hand lever, which is shown below.
1. The adjustment knob of the wiper is mainly used to adjust the frequency of the automobile wiper. In general, car owners can see a step-up pattern similar to an inverted triangle.
2. The jog operation function of the wiper, as long as the wiper is dialed forward, the wiper will scrape the glass every once in a while to remove the rainwater on the glass.
3. If you dial the wiper down a little, the wiper will be turned off in this case, and it will not be used again, and there will be no way to scrape the rain.
4. If the wiper is dialed down to two points, in this case, the wiper will be in an automatic adjustment state, and the wiper will change the frequency of scraping according to the distribution of rain in front of the car glass.
5. If you dial down 3 or 4 points of wipers, they are in a high-speed mode and low-speed mode, and the owner can choose the wiper frequency according to his own needs.
6. If the control lever is pressed to the bottom of the hail bridge, in this case, the lead is matched to let the wiper open the glass water spray switch inside, as long as the owner pulls the handle inward, the wiper will spray glass water to clean the glass at the same time as the operation. Yuanmeng.
There are 4 steps to <> the correct use of caliper measurement, which are to observe the size of the workpiece to be measured, observe the workpiece to be measured, pull the caliper open, and record the caliper reading. >>>More
In two cases, if the content in the double quotation marks is said by someone else, the full stop should be loaded inside the double quotation marks, otherwise it will be added outside the double quotation marks. Examples: >>>More
The eye cream should not be applied too much, and it must be completely absorbed.
Rose essential oil does not act directly on **.
Base oils are not the creams you usually use to wipe your face. >>>More
Please find a copy of "Gas Welder Technology" and study it. There are benefits.