After the computer is installed, there is a lot of English followed by ox3 What does it mean

1.If the system disk itself is faulty, swap the parameters behind boot1 and boot2 on the diagram and redo the system.

2.It seems that you are a notebook, many notebook manufacturers have self-healing hard disk reserved partitions, if you don't deal with it first and then mess up the system, this kind of error will occur.

3.If win7 changes to XP, please first find the AHCI item in the BIOS and change it to IDE,Otherwise, this situation will occur。

It is recommended to use the original image file to make a USB flash drive or CD-ROM and reinstall the system.

You unplug your network card, then reboot the machine, and if it doesn't, go to the BIOS and boot the computer with the hard drive. Before entering the system, press several more times.

This is caused by the motherboard's poor support for 4K, reformatting the C drive, removing the 4K alignment, and reinstalling the system is OK.

If you cannot enter the operating system, it is recommended to reinstall it, or use the system disk to boot in, and enter the BIOS with multiple hard disks to select the right boot order.

Reinstalled the system yourself? Will you? If you would still come here and ask questions like this?

I won't take it to a computer repair shop to install it! Cheap and not expensive!

The boot display is the output result of some boot logs, it may be a system error, it may be a hard disk self-test, or it may be a BIOS inspection report, most of the cases belong to one of these three types of reasons.

The first kind of system error, this situation is generally because of the wrong shutdown, or some software caused by the shutdown error caused by the system file is damaged, after the boot of the system boot failure prompted an error report, generally this situation shutdown and then boot can not solve the situation after the use of the system installation disc repair or reinstall the system is the quickest solution, trying to manually repair the system file is a very large project.

The second type of hard disk self-test, which is caused by the error of hard disk data, or the excessive number of sectors remapped by the hard disk, if the problem occurs repeatedly, it is recommended to test the hard disk.

The third F1 error prompt, this situation is caused by the motherboard self-test detecting the incorrect settings of some devices, and the English prompt is copied down and explained in detail under the online query.

ASUS motherboard is a brand machine with ** identification code inside, which may be related to the piracy of the system you installed, give a certain hint! Or maybe you didn't use the system provided by their ASUS after-sales service, and there were some identification issues!

There are several reasons for this.

A: The motherboard BIOS is out of power, or the BIOS settings are wrong, and you can't remember the hard disk information, if your system date is incorrect, it is likely to be the reason.

Solution: Replace the BIOS battery and re-enter the BIOS to detect the hard disk. Open the case, remove the shiny battery on the motherboard, and then try to install it after a few minutes, unplugging the case power cord first.

b:IDE SATA cable is of poor quality or plugged in.

Solution: Change an IDE SATA cable or plug the IDE SATA cable into another IDE SATA slot on the motherboard, do not connect the hard disk cable with other IDE devices, such as optical drives, separate the two IDE cables, and set the master and slave disks correctly.

C: The hard disk is faulty and may need to be replaced.

D: There is a problem with the boot sector of the hard disk.

You can check in the BIOS first, whether you can find the hard disk in the BIOS, if you can't find the hard disk in the BIOS, which may be the hard disk is broken. If you can find the hard disk in the BIOS, set the optical drive to boot, put the system disk in the optical drive, and reinstall the system.

Is it that you are choosing the language, you are choosing English.

Did you change the BIOS settings?

In this case, there is generally a problem with the system, boot with the original system disk, and reinstall the operating system to restore it to normal. Take the win 7 system as an example:

1. Insert the system disk (CD-ROM or U disk) into the computer.

2. Restart the computer, enter the BIOS, and set the system disk as the preferred boot device in the BIOS.

The BIOS settings are different for different motherboards, please refer to the manual of the motherboard to set them up.

3. After restarting, the system starts to boot from the system disk, and after booting, it is installed normally.

4. Complete the system installation according to the prompts of the installation program.

Note: 1. Please use the original installation disk for installation, and no third-party software is required to install the system.

If there is a problem with the host, it is recommended to take it to the place where the computer was bought for maintenance, and it may be replaced if you go outside to repair it, and the computer will become more and more rubbish.

Be ready to unplug it quickly.

Because if you install the system, it shouldn't appear, and it can't appear like this, unless it's when you shut down abnormally.

The normal one should be the next step or ask you to divide the hard disk space.

Hello, you can press F2 (most notebooks) del (desktop) when booting, see the manual for differences, in the boot option, according to the English instructions, adjust the boot order, set the hard disk to the first open storage to move the fertilizer plant plug Bonser Chicken boot order, you are doing the system is not to boot from the U disk, CD, so it will be like this.

After installing the system, is the boot normal?

1 All say there is a problem with your system or hardware, reboot. In fact, you know what this is talking about is useless, in this case, the best solution is to reinstall the system, before reinstalling, clean up the dust in the host, unplug the memory, graphics card, and plug it back in. If this situation still occurs, it is a problem with your hardware, mainly to see if the capacitor on the motherboard has blistered pulp, whether the capacitor in the power box has bursting pulp, you can only look at these, and the others need to be tested together with a professional.

The system installation disturbance method is wrong,The notebook itself is pre-installed genuine win10 with uefi+gpt(guid)quick start。 You have installed the Ghost version of the system, and you can't use UEFI to start quickly. Win7 and other Ghost versions of Win10 are launched with the traditional empty version Legacy+MBR.

win10 mod win7 or other ghost version win10 system.

One, change the BIOS settings.

Turn off Secure Boot in the BIOS. Enable the legacy compatible boot mode, and the setting method is different for different brands of motherboards.

Second, change the hard drive partition type.

Use PE to change the GPT of the hard disk partition table to MBR in the partitioning tool Disk Genius.

Third, the specific ASUS pen slows down the loss of Qi notebook.

Pre-installed win10 modded win7,There is ** tutorial。 Follow the tutorial to set it up before installing the operating system.

The boot order is wrong.,It's OK to enter the BIOS ban.

1. Press F8 to press F8 to get the advanced option to appear in the release of the power, and select "The latest correct configuration" Enter to repair.

2. Please boot the computer and press F8 to enter the safe mode, use the system's built-in system restore, restore to the time when you did not have this failure to repair (or use the restore software to restore the system).

3. If the fault persists, use the system disk to repair it, open the command prompt and enter sfc scannow Enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically compare the repaired.

4. If the fault persists, set the optical drive in the BIOS as the first boot device, insert it into the system installation disk, press the R button, and select "Repair Installation".

5. If the fault persists, it is recommended to reinstall the operating system.

If it really doesn't work, it is recommended to choose repair installation, so that the system can be repaired, and the programs and files of the C drive can not be lost.

Use the system that comes with the system restore method:

The system comes with System Restore: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click Next to restore.

If the system restore cannot be carried out in normal mode, you can turn on the computer and press F8 without moving, let go when the advanced options screen appears, select "Safe Mode" and follow the prompts to enter the safe mode, the operation method is the same as the normal mode (sometimes there is a conflict with other programs when restoring).

1.Turn on the computer, put the XP installation disc in the optical drive, then press and hold the del to enter the BIOS, and set the CD-ROM to the first boot! If prompted"boot from cd", press enter.

2.Enter the splash screen, select Install WinXP, press Enter to install! Pressing enter may appear"press any key to boot from cd"At this time, continue to press enter, otherwise the hard disk will start.

3.Select the 1st one, press enter, and start the installation, reading the driver to memory.

4.After loading the driver, you can see the partition of your hard disk, and it is recommended to install the C drive. It should be noted here that if you want to do a clean install, then you need to format it, so the key to formatting is to delete the C drive first.

Only the XP installed in this way is a brand new XP. So please move the cursor to the C drive and press"d", delete partition C.

5.You pressed"d"After (delete), XP will confirm that you will lose data because you are afraid that you will delete it by mistake and prompt deletion. Of course, I'm just going to format it and then install it, so please press it"Enter"Go on.

6.Keep pressing"l" 。

7.After deletion, the C drive becomes an unpartitioned partition! Press"Enter"Go on.

8.Here you will be asked to choose the disk format. Let me talk about the difference between NTFS and FTA.

First of all, NTFS has all the advantages of FAT, NTFS has less fragmentation than FAT, high security, can encrypt files, supports disk quota, supports partitions above 30G, supports compression, and compresses up to 50%. I like to use NTFS and declutter the disk very quickly. However, due to the high security of NTFS, the NTFS partition cannot be accessed under DOS, and it cannot be formatted for the boot floppy disk, only the XP disc can be formatted.

So, if you're not sure, it's better to use FAT. The following 4 choices, (fast) means quick format.

9.Press"Enter"Go on.

10.Formatting.

11.The installation begins. The disc installation is automatic, from start to finish, and it is estimated to take 20-30 minutes.

12.Familiar installation screens.

13.Installed, 1st reboot.

14.Installed.

What should I do if the computer is turned on in English, change it here in the computer, and you can easily solve the problem.

The boot items of the system are not installed, so reinstall the system. If the system is reinstalled again, it is recommended to format the original system, if the system is still like this after formatting, there may be a problem with the disc system. If it doesn't work, change the system.

The system is not installed,Change individual software installation,If you want to enter the system,Restart the boot and press the upper button once,You can enter the system。