What should an electric guitar scholar learn first? Why can t you read the six line staff? How to se

Start with basic music theory knowledge, then learn to read six strings, then do simple scale exercises, then slowly learn skills, and finally play tunes;

At the beginning, you will definitely encounter a lot of difficulties, the key is to persevere, feel more when you are usually fine, and experience the beat of the song;

The steps to learn an electric guitar are roughly as follows:

1.Finger training.

2.Scale. 3.Chord.

4.Ear training.

5.Read music. 6.Creation.

7.**Theory.

8.Improvisation.

Six-line staff. In fact, it is equivalent to the coordinates, which directly tells you which line to play with your left hand and your right hand, such as 2 strings and 3 frets, 5 strings and seven frets and so on. Six-line notation is a common notation for folk guitar and electric guitar. The advantage is that for not, too lazy to look at the staff.

It is easier to bounce the song down. The disadvantage is that the hexagram staff is only coordinates, not notes, and does not have any meaning of explanation, and it is impossible to understand the content just by looking at the hexagram.

Staff is used in all Western musical instruments.

The functionality for recording ** has been perfected.

If you have a choice, of course, it is better to use a stave, but if you learn a folk piano, you will inevitably have to use a stave. If it's a classical guitar.

It's definitely a stave.

Resources.

1 is the main melody, that is, the most important part of the song, the skeleton of the song, we can make up a lot of accompaniment from the score of the original song (accompaniment: the part other than the main melody to assist the main melody), but the main melody is unchanged. And in fact, the key of the lyrics is the main melody, and you can see that each word of the lyrics is accompanied by a note (1, 2, 3, 4, 5, 6, 7), and the part without lyrics in front of it is called the prelude.

"It's the first five that has to be extended by one beat, which means that if three and two are finished and they have to stop for one second, then five has to be played and stopped for two seconds.

If 3 and 2 are finished and they have to stop for half a second, then 5 is finished and stopped for one second. But now the prelude you don't have to worry about him)

2your clever Yes.

3 is also a matter of time value, add "- longer than the uncrossed line to pause, the uncrossed line is longer than the following line to pause, plus a line is longer than the two lines to pause, for example, add two lines to pause, stop for one second after singing, add a line to stop for two seconds.

Four seconds without a line is followed by a stop of "--" for eight seconds, and so on.

4. There is a small compartment in the upper part of the guitar, and you pluck the strings with your right hand, and you have to press the strings with your left hand, and the number is 1, and you have to press in the first compartment.

The x number is that you don't have to care about the first few squares, because your hand has to be fixed and press according to the top square.

5 dots is also a matter of time, for example, the 1 needs to stop for two seconds, and then the smaller dot needs to stop 2 times.

It's useless for me to just say that if you want to play this song, buy a guitar book and learn it.

1. The numbers at the bottom represent the simple spectrum, that is, do(1) re(2) mi(3) fa(4) sol(5) la(6) si(7).

2. It is plucked by two strings together.

3. The single line represents the 8th note, and the double line represents the 16th note.

4. X represents which chord you should play according to the chord above.

The dot on the top represents treble 1, that is, the treble do, and the dot on the right of 1 is called the dot, which represents the length of the original note of 1 2, 1 was originally an 8th note, but now the dot is added, that is, 1 becomes: 8th note + 16th note, and there is a double line under 3, so 3 is a 16th note.

In this way, a total of 1 (8th note + 16th note) + 3 (16th note) = 4th note, which is one beat.

To learn guitar, you need to learn six-line notation, and you can skip learning stave first. The teachers at the guitar school will teach notation, but the teachers in the training class will not, because learning staves will not help much in learning guitar, and the training teachers are not in a position to do such thankless tasks.

The six-line staff is a special score for the guitar, and the six-line guitar plays how to press the strings with the left hand and how to pluck the strings with the right hand, which is marked at a glance, and after the beginner puts the guitar flat, the thinnest 1 string is just below the sixth line of the six-line staff, which looks very intuitive.

Learning the guitar requires carpentry work, and it is necessary to be proficient in basic fingering and rhythm before you can accept more advanced knowledge, and practice makes perfect at all times. Some people talk about how ** is extraordinary, how the guitar is unfathomable, how music theory is ethereal, in the final analysis, it can only be self-deception. The guitar is actually easy to learn, and the folk guitar is the starting point for learning all guitar playing.

If learning the guitar was really that magical, it wouldn't be called a popular instrument.

You can learn it by yourself, the teacher tells you a sound, you count it slowly according to that note, don't deliberately mark the score, and you will get used to it after a while.

You still have to learn staves, otherwise you won't know what you're playing, and you won't understand the theory at all. So what did you study? I call such people carpenter's work.

There must be five of them, and six of them don't know.

First of all, this pure digital six-line staff with chords is to allow you to use more appropriate fingering, and the role of the maker here to use the g chord is actually to highlight the root sound of "3" (mi), that is to say, the reason why this 6-string 3-fret is matched with the g chord is to facilitate the fingering and quickly convert to the next 3-string 2-fret, that is, the 3-string 2-fret does not belong to this g chord (I think it is easier to understand the G9 chord here, Because the G9 chord is pressed on the 1st string 3rd fret and the 3rd string 2nd fret and the 6th string 3rd fret), so, at this time, the 1st string 3rd fret and the 5th string 2nd fret of the G chord do not need to be pressed (waste of physical strength with fingers)! To learn to change, don't see a certain chord written on it and do it according to it, the fingering that can be played correctly and feel comfortable is the best (the chord on the score is the notator's own fingering). You can refer to the specific picture above

The above figure is used to press the G chord root note with the middle finger (6 strings and 3 frets), and the index finger to press the 3 strings and 2 frets (recommended, because it is good to press - -

The above diagram is to press the G chord root note (6 strings and 3 frets) with the ring finger, and press the 3 strings and 2 frets with the middle finger, in fact, this is the G9 chord I mentioned above!

The diagram above is to press the 6 strings and 3 frets with the ring finger and the 3 strings and 2 frets with the index finger (if you must press the g chord and then press the 3 strings and 2 frets, use this fingering - you see how hard it takes to fingering, right?). ）

Well, you can understand that the root sound is the root sound of g, that is, 6 strings, and you can change the position of the little finger press, this is not dead, but a little finger play.

You don't use the little finger at all, you don't use the g chord, the fifth string, the second fret, you have four empty fingers, can't you free up the third string 2 fret?