My scale used to be able to measure body fat and fat percentage, but why can t it now?

If your body fat scale used to measure body fat and fat percentage, but now can't, it could be one of the following reasons:

1.Body fat scale malfunction: Body fat scales can malfunction, resulting in inability to measure body fat and fat percentage correctly.

You can try restarting your body fat scale, or check if the battery is loose or low, and if there is a problem with the battery, you can try replacing the battery. If the problem persists, you may need to replace it with a new body fat scale.

2.Improper operation: When using a body fat scale, you need to follow the correct steps.

If you do not follow the steps on the instructions, or if there is sweat, impurities, etc. in the measurement area of the body fat scale, it may affect the measurement results. You can check if you are following the correct steps and clean up the measuring area of your body fat scale.

3.Lack of references: Without the right references, a body fat scale may not be able to accurately measure your body fat and fat percentage. You may consider using other devices or methods for comparative measurements, such as using a scale, tape measure, etc., to verify that the measurements on your body fat scale are accurate.

It is important to note that body fat scales are not absolutely accurate measurement devices, and their results can be affected by a variety of factors. Therefore, you can use the results of the body fat scale as a reference, but you should not rely solely on it to assess your own health. If you have concerns about your health, it is advisable to consult a doctor or other professional.

The basic principle of those body fat scales in the market is non-adipose tissue and fat moisture content.

Not the same, as such, contains electrolytes.

The composition is different, the former resistor is small, and the latter is large. By applying weak electricity to the human body and measuring the electrical resistance, you can calculate the ratio of fat and non-fat tissue.

But because of this body fat scale, the equipment is too simple (generally only 2 electrode contacts, the real detection instrument is 8 electrode contacts), the accuracy is very low, the measured data has almost no effect, and the gym is generally 4 6 electrode contacts, which is still inaccurate.

So, if you must know your body fat changes, use skinfold pliers to record your body's waist circumference and hip circumference.

and other size variations.

If it is under warranty, you can contact customer service. Or a maker. Carry out repairs.

If the time is exceeded, you can try a factory reset yourself. Or maybe it's broken and you can buy a new one. In addition, the body fat scale that measures body fat and fat requires standing barefoot on the scale.

Your sincerity can not be rubbed from the fat now after the seventh day of the first month, it may be that you did not carry out the system closure, this should be able to see the escalation battle should be more difficult and better.

There is a certain accuracy rate, which can provide a reference.

The principle of lipid measurement:

The weighing method of the smart body fat scale is the BIA bioelectrical impedance measurement method. That is, the user stands barefoot on the body fat scale, and a weak current passes through, and a resistance value is measured according to the law that body fat does not conduct electricity, and body water conducts electricity. According to the user's height, age and gender, it is calculated by substituting the big data sample model.

There are three main things that determine whether a body fat measurement is accurate:

1. Sample model.

There are three main types of sample models: sample models built with Caucasian users in Europe and the United States, sample models built with yellow Asian users, and sample models created by specially trained people such as athletes. Obviously, the sample model made of yellow people is more in line with the real physical condition of ordinary users in China.

2. Sample size. The sample size is proportional to the accuracy of the measurement results, and the larger the sample size, the finer the classification and definition of the user, so the higher the accuracy of the calculation.

Since the company's inception in 2013, Youpin PICOOC and the University of Chicago have jointly used a sample of more than 600,000 yellow users to polish the algorithm and data to get closer to the real physical condition of ordinary people.

3. Measure posture. At present, there are three ways to measure fat on the market: two-handed measurement, two-foot standing three-dimensional fat scale measurement, and mixed measurement.

The measured results can only be said to be relatively accurate, and they follow the principle of resistance induction. Because there is water and blood in the muscles, the muscles of the human body are electrically conductive. Fats do not conduct electricity.

The body fat scale measures the size of the human body resistance (bio-impedance, also known as bioresistance) by outputting a safe current to the human body, so as to judge the ratio of muscle and fat, and obtain a relatively accurate result.

This result includes the percentage of body fat, the percentage of body water, the percentage of body muscle, the weight of bones, and so on.

Relatively accurate.

A body fat scale is a scale that can measure fat, moisture, etc., in addition to body weight. There are sensors on the market that measure body fat in two materials: ITO membrane and electrode sheet.

The principle of the human fat scale is that muscle contains more water such as blood and can conduct electricity, while fat does not conduct electricity. Because the channel conductor of the current in the body is the muscle, the weight of the muscle can be known from the difficulty of the current passing, and from this, the proportion of the body weight can be judged.

In the study of the principle, it was found that when a certain frequency of electrical signals pass through the human body, the fat part has a higher "impedance" value than the muscle and other tissues of the human body. When a safe electrical signal of a specific frequency passes through the human body, the electrical signal will change to varying degrees depending on the value of the "impedance" of the human body.

Principle: Muscle contains more water such as blood and can conduct electricity, while fat does not. Since the channel conductor of the current in the body is the muscle, the weight of the muscle can be known from the difficulty of the current passing, and it can be judged that the proportion of body weight is higher in people with less muscle.

There are many reasons why a body fat scale can't weigh you, but the most common reason is that the body fat scale is running out of battery or not detecting the user's presence. You can check it out by following the 3 methods below. 1. Restart the body fat scale, the body fat scale is also a machine that may malfunction, turn the body fat scale back on.

2. Check whether the power is sufficient, if the display is low or the display is abnormal, you can try to charge it before using it, so as not to use it normally due to low power. 3. Some body fat scales require users to measure with bare feet, so as not to affect the normal body fat measurement, you can try to take off your socks and stand upright to have a look. If these methods still don't work, you can read the instruction manual to check the machine or give the after-sales service a ** to solve the problem.

Feel it useful and welcome! Full text.

Maybe you don't have fat, are you the white bone spirit in Journey to the West.

Maybe it's broken, maybe it's useless for a long time.

Because body fat is called science and engineering.

I don't know, the "real me" body fat scale I use has not appeared at the time, Bluetooth linked.

Is there no power, or no battery?

Allergen Tukui Lake ugg I little y he he he he he he.

The body fat scale can really measure the fat of the human body. Details are as follows:

Body fat scales are usually based on gender, age, weight, and height to calculate the amount of fat in the body. If bioelectrical impedance measurement is used, you need to stand barefoot on the body fat scale, and the person's ** will be in contact with the measuring electrode, which will show the content of body fat, so it can have a measurement effect on the human body.

You can use a body fat scale to measure accordingly, and you can effectively observe the amount of body fat in your body. In addition, the body composition analyzer can also measure the amount of body fat, muscle, and water.

Fat is an important part of the human body, which can provide energy, maintain body temperature, participate in the body's metabolic activities, etc. However, the presence of too much fat in the body will affect human health and lead to cardiovascular and cerebrovascular diseases, so it is recommended to control the body shape within a certain range.

It is recommended to pay attention to a regular diet to ensure a balanced body, eat less fatty foods, eat more light and easily digestible foods, and exercise properly. [Now**Slim Bar Fat Loss APP, you can get fat loss reviews and programs for free.

Scientific fat loss recommends the slimming bar app. The new generation of scientific fat loss solutions proposed by the Slim Bar Fat Reduction Institute is jointly recommended by many world-renowned scientists, including Nobel laureates, and is based on the theory of scientific fat loss. <>

OK. Body fat.

Scales can measure fat, moisture, etc., in addition to body weight. The vast majority of body fat on the market is said to use the bioelectrical impedance method, and the principle is: assuming that the body only has two components, muscle and fat, and muscle water content.

Relatively high, easy to conduct, while low water content of fat is difficult to conduct, hence the resistivity of muscle and fat.

Different. When a low-frequency or direct current is applied through a biological tissue, the current bypasses the tissue, while a high-frequency current passes directly through the cell. When a person stands barefoot on the scale, as long as a fixed current is entered, the fat and muscle content of the human body can be judged by the difficulty of the current passing.

No, the body fat scale should be randomly generated according to some algorithm.

In order to ** the purchased scale, today it has finally arrived, is it really able to measure body fat?

is accurate. The measurement principle of body fat scale, known as BIA bioelectrical impedance measurement method in the industry, is a common measurement method for almost all body fat scales, body composition meters and other measurement tools on the market.

The human body is composed of fatty substances and non-fatty substances, which have low water content, high electrical impedance and poor electrical conductivity; It has a high content of non-fat substances, low electrical impedance and good electrical conductivity.

That's right. Fat measurement using "bioelectrical impedance technology". Add ITO conductive film or conductive metal sheet on the surface of the scale, when the human body steps on it barefoot, it will form a closed-loop electrode, because the fat does not conduct electricity and the water conducts electricity, so the current value, resistance value and weight value can be calculated to calculate the content of body fat.

In other words, to measure fat percentage, you have to go barefoot.

As for accuracy, first of all, this method itself is flawed. The conductivity of a person's body is not the same in the morning and evening; Secondly, the environment and indoor temperature and humidity can also affect the measurement results.

There will definitely be errors. But you can go to the hospital for a check-up, and some measure how much fat you have in your body. That's more practical.

Summary. First of all, you need to make sure that the personal information is set, and the display screen has a human display, which means that it is set. Secondly, because the fat scale measures the information of fat through the weak electrical current of your body, it is important to make sure that you are standing barefoot on the electrodes on both sides of the scale and your body is balanced.

Again, if you still don't see any fat information, it may be that there is a stain on the electrodes, so please wipe the electrodes with a damp cloth and then test them barefoot. There is also a common reason that the battery is placed a little problematically, please disassemble the battery cover and reinstall the battery.

First of all, you need to make sure that the personal information is set, and the display screen has a humanoid display, which means that it is set. Secondly, because the Fat Burning Scale measures the weak current in your body to measure fat deficiency, it is important to make sure that you are standing barefoot on the electrodes on either side of the scale and maintaining your balance. Again, if you still don't see any fat information, it may be that there is a stain on the electrodes, so please wipe the electrodes with a damp cloth and then test them barefoot.

There is also a common reason that the battery is placed a little problematically, please disassemble the battery cover and reinstall the battery.

1. Check whether the body fat scale is placed on soft ground such as carpet or uneven floor. If so, move the body fat scale to a hard, flat ground before taking measurements. 2. Check whether the body fat scale touches the wall or other objects.

If so, move the body fat scale away from the wall or object. 3. Check whether other objects are stacked on the surface of the body fat scale. If yes, please remove it, put the scale on the ground, touch the scale surface with one foot to turn the scale on, then move the foot away, the body fat scale shows "kg", and then go on the scale to measure after about 3 seconds.