What should I do if there is water in my iPhonexr?

Apple mobile phone water treatment method:

1.Cleaning with alcohol and ultrasonic is available in general repair shops.

services. 2.The worst plan is to send the phone to the brand's customer service for testing and replacing the motherboard or chip.

3.Due to the man-made failure of the mobile phone caused by water ingress, the official will not provide a 3-pack warranty, and if it needs to be repaired, it can only be repaired by paying for it.

4.If you have a little watermark, try a hair dryer, a hot air gun, or put it in a rice cabinet to remove moisture.

5.Even if your phone seems to be working properly, it is highly recommended that you detain the battery as soon as possible to avoid a short circuit on the PCB.

I'm an Apple maintenance engineer, so let's talk about a few points.

1. Apple XR has a waterproof function, and daily splashes can be waterproof, 2Apple XR really can't be replaced with a new one if it gets water, and it's not covered by the warranty.

3.There are several waterproof test strips in the iPhone, which turn red when exposed to water or water vapor. There is no warranty.

4。Daily use is not only water, water vapor into the inside of the mobile phone will also cause the motherboard to short-circuit and not turn on 5, do not turn on if you don't turn on, but the individual chips on the motherboard are short-circuited, you don't need to replace the entire motherboard, and you don't need to change the phone. Of course, if you can provide a free warranty, it will be free, otherwise you will go to repair, and you must not listen to the tricks of a small shop without technology, and you must change the motherboard.

6.If there is not much water intake, you can wipe off the water and enlarge the rice to absorb water, and take it out the next day. It is good individually.

7.If there is a lot of water, even if it is normal for the time being, it is recommended that you disassemble the machine to clean up the water, otherwise there is a dark disease, and the parts inside are all metal structures, and there will definitely be problems if the corrosion rusts to a certain extent.

Let's talk so much first, and then ask if you don't understand.

After the iPhone falls into the water, you need to pick up the phone as soon as possible, use a hair dryer to air dry the phone, and then wait before trying to turn it on.

If you fall into the water, you can quickly fish it out, and if you soak it in the water for too long, you may need to go to a specialty store for repairs.

If your phone falls into the water, you should turn it off as soon as possible to dry it. Then put it in the rice cylinder overnight, the next day to see if it can be turned on, if it can't be turned on, go to the after-sales maintenance point for maintenance.

Hello, don't turn it on immediately after entering the water, you first take the phone to the local repair shop to find someone who repairs the phone, and help you repair it to solve it.

If it falls into the water, quickly pick it up, dry it, and take it to the after-sales area for repair.

iPhone XR fell into the water, first quickly pick it up, dry the water on the surface, then clean the charging port with toilet paper, and finally blow the charging port with a hair dryer for about 10 minutes.

Pick it up immediately and turn it off and then dry it with a hair dryer, if it doesn't work, you have to take it to the mobile phone store to disassemble it.

First of all, how long has your phone been in the water? How deep is the water?

If the water is shallow (about half a meter) and within 1 minute, you shouldn't have any major problems with your phone! Then follow the steps below to do it.

1. Don't press the power button to turn on!

2. Use paper towels to absorb water in concave places such as earphone holes and peripherals;

3. After sucking dry, you need to blow it with a hair dryer for 5 minutes, (generally at this step, it should be possible to start by pressing the power button again).

4. If the safety point, you can disassemble the hand screws and check whether there is water inside, if the water enters the same way, but it is not recommended to use paper towels, you need to use facial paper and makeup remover paper to absorb the water inside, and at the same time blow the hair dryer for 5 minutes after blotting, and then place it naturally in a dry place for 1 day (the air conditioner can blow against it).

Fish it out of the water as fast as you can (fast, every second) and turn off your iPhone immediately. Press and hold the power button until it turns off.

Remove all shells right away, as they will trap moisture. The screen protector can be left unpeeled unless you see visible blisters inside.

Dry your iPhone with a cloth, as dry as you can, you can wipe the screen, sides, and back with a cloth (t-shirt, socks, etc.) or absorbent materials. Pay special attention to the power buttons, volume buttons, mute switches, speakers, microphone, and audio output jacks, and try to wipe all visible moisture as much as possible.

Contact the after-sales center immediately for free inspection and repair.

1.Don't shake your phone too hard. Because under the constant shaking, the liquid will swim inside the machine, and the moisture may enter deeper and burn the internal chip of the machine.

2.Don't use the hot air of a hair dryer to dry your phone for a long time. iPhones are now all metal bodies, and metal conducts heat easily, which will blow off the solder joints of the motherboard inside the machine, causing the motherboard to malfunction.

3.Do not attempt to charge a phone that has been flooded. An iPhone that gets into the water may have water stains inside, which can burn out the motherboard when it is powered on and cause a more serious failure.

1. You should do this as soon as the phone gets into the water: 1If the phone is turned on, turn it off immediately. If your phone is powered off, don't try to turn it on.

Once your phone is flooded, place it horizontally without shaking it or placing it vertically, as this will speed up the liquid into other locations.

It is not advisable to use a hair dryer to blow on the mobile phone after the mobile phone is flooded, as this will spread the liquid inside the mobile phone and may damage other parts.

If it is only a little bit of moisture, or the phone is damp, then we can put the phone in a bag with rice and let it stand for two days to take it out and use it. Rice has a good drying ability, and electronic devices in the home can be put into drying when they are damp or flooded.

5. iPhoneXR is waterproof, and its effect reaches IP67 level under the IEC60529 standard, and the mobile phone can stay underwater at a maximum depth of 1 meter for up to 30 minutes. If you soak your phone in water for a long time, it will cause water to enter the inside of the body.

6. The waterproof, splash-proof and dust-proof functions of the mobile phone are not permanently effective, and will be weakened accordingly with the use of the mobile phone. Note that Apple will not warrant if the phone is damaged due to immersion in liquids.

The treatment method after the iPhoneXR is flooded is as follows:

1. First, press and hold the power button of your phone until it turns off.

2. Then remove all the shells as they will retain moisture. The screen protector can be left unpeeled unless visible blisters are seen inside.

3. Then wipe the phone screen, side and back. Pay special attention to the power buttons, volume buttons, mute switches, speakers, microphones, and audio output jacks, and try to wipe all visible moisture as much as possible.

4. Finally, put it under a slight heat source such as a desk lamp and spotlight to let the moisture slowly dissipate, and then try to turn it on.

The mobile phone should be shut down as soon as the water enters, and it is forbidden to turn on and charge it if it has been automatically shut down, and send it to the repair shop for disassembly and cleaning as soon as possible.

2. Shut down.

After scooping it up, it should be shut down quicklyOperation method:

Press and hold the [Power Button];

If you can't turn off by pressing and holding the [Power Button], you can press and hold the [Home Button] and [Power Button] at the same time to force the shutdown;

3. Remove the phone case.

It is estimated that all friends have protective cases such as mobile phone cases on their iPhones, so they must take off the phone cases after turning them off, which is to prevent the water in the phone cases from seeping into the iPhone and then damaging the motherboard;

4. Wipe the outside of the iPhone body.

After removing the phone case, use a dry towel or other paper towel to dry the water on the outside of the iPhone body.

5. Take out the SIM card.

After completing the above steps, quickly remove the SIM card and place it in a dry and ventilated place;

6. Absorb the accumulated water in the small pores of the iPhone body.

After completing the above operations, remember to blot up the water in the small holes in the external crevices of the iPhone body;

It can be repaired, but the following measures should be taken immediately after the water has entered:

1. Do not shake the fuselage when it is turned on.

Once your iPhone gets water, it should be turned off immediately. Keeping the computer on in the case of water ingress will form eddy currents, cause short circuits, and the motherboard will burn out. So never turn it on.

2. The first thing to do after shutting down.

After shutting down, first wipe off the water on your phone's case with a towel. Then quickly unplug the SIM card and keep it somewhere else. Next, use a paper towel to suck up the water from the headphones, dock and SIM card slots.

Turn off the power as soon as possible, turn off the mobile phone to ensure that the water will not harm the hardware, and the second is to shake it dry to shake the water out of the screen. If there is residual water on the screen, there will be traces after the droplets dry. Third, put it under a light heat power source such as a desk lamp and spotlight, and let the water slowly dissipate, which generally takes more than six hours.

Don't be in a hurry.