Can an air suction corn planter adjust the grain?

Hello? For your reference: When adjusting the amount of seeds, the air suction corn seeder needs to replace the suction cups with different hole spacing to adjust the number of seeds. The manufacturer will give you suction cups with different hole spacing due to different seed amounts. Please feel free to use it.

Digression: What you asked ( Can the air-suction corn planter plough the stubble field Does the 4-row one have a sowing scribing rod )

Corn planters mostly use plowshares as furrowers in production, which can be used for iron stubble (unspun ploughed plots) sowing.

Do the 4 rows you describe have seeding scribing rods?

I used a 24-row wheat planter in 1972 because I needed to stalk at the same time when sowing, and in order to ensure the width of the furrow, I used a scribing rod to ensure the quality of the furrow width. The production of the marking rod is very simple, within a certain length of the material, the end can be installed with a rotatable platter. As for the marking rod you mentioned, you can consult the manufacturer for relevant information.

I want an operator who has mastered a certain amount of agricultural machinery sowing technology to complete the corn sowing task without using a marking rod.

Thank you for your question.

Adjust the dial of the seed discharger of the corn planter up or down, generally when adjusting downward, the grain will be more, and the amount of seed will be less when adjusted upward.

Check whether the chain ratio of the seed shooter is correct (the higher the gear, the less seed will be produced), and check the red knob of the seed shooter (less seeds are raised and more seeds are lowered); Finally, check whether the scoop of the seed dispenser corresponds to the corn kernels, if the corn kernels are large, use a large spoon, and use a small spoon if the corn kernels are small.

Corn seeder precautions.

Every time the beam is sliding, it should be driven at a constant speed, not fast and slow, and not suddenly stopped halfway. Try not to work at night, which is prone to danger. If you can't see the ground clearly, don't drive.

If you drive too fast, it will affect the effect of planting. If the driving is too slow, it will affect the efficiency of the operation.

Because it involves the use of pesticides, it is important for staff to wear protective clothing and masks to avoid inhaling toxic substances when the wind direction is unclear, and personal safety should be the priority.

There are two main reasons for the uneven bell of the corn planter.

The first is that the transmission chain is slightly longer, and the amount of activity is large, resulting in a meal and a meal.

The second is that the design of the seeder is unreasonable or the debugging is not right, the shorter the bell is from the ground, the more stable the next seed can be, and the design of the furrow opener is too high and too long to affect the plant spacing. Because after the seeds fall, the ditch opener has not passed, and the position of the ditch opener has changed! The method of improving the middle difference is as shown in the picture, remove part of the top and back of the ditch opener, and lift the ditch opener upward!

Corn seeder is the main force of corn sowing operation, which can realize the quantitative sowing of corn seeds into the soil according to the fixed row spacing and plant spacing, and carry out reliable soil burial, which is conducive to the uniform distribution and reasonable growth of corn plants. So how to adjust the corn planter?

1. Take the corn single seed seeder as an example, there is a handball on one side of the seeder seeder, and there is a partition to control the seeder in the handball, and there is a gap on the top of the partition, which is suitable for sowing small corn seeds and large corn seeds downward. In the process of sowing operation, it is necessary to ensure that the uniform speed of the agricultural machinery moves forward in a straight line, and the sowing work can not appear fast and slow, and the machine should be checked regularly.

2. There are two buckets of the hand push corn planter, and there is a toggle device under the two buckets, and the number of corn kernels can be adjusted by adjusting the toggle device.

3. How to adjust the gear of the corn planter. Corn planter generally has 5-8 gears, adjust the gear can control the sowing plant spacing, generally adjusted to the first gear of the plant spacing of 15 cm, the second gear of the plant spacing of 18 cm, the third gear of the plant spacing of 21 cm, the fourth gear of the plant spacing of 24 cm, the fifth gear of the plant spacing of 28 cm, the sixth gear of the plant spacing of 30 cm, the seventh gear of the plant spacing of 33 cm, the eighth gear of the plant spacing of 36 cm.

4. Precautions for the operation of corn seeder. In the process of sowing operation, it is necessary to ensure that the uniform speed of agricultural machinery moves forward in a straight line, and the sowing work can not be fast and slow. Reading rent.

5. Closely observe the operation of the machine, and stop the machine for inspection in time if any abnormalities are found.

6. Pay attention to the regular professional inspection of the effect of sowing, and check whether there is a cavity or cavity high hunger sowing amount is not up to standard through spot checks.

The above is the introduction of how to adjust the corn seeder.

Summary. The adjustment method of the hand-pushed corn seeder: the adjustment of the corn plant spacing is mainly changed by replacing the transmission sprocket, and when the planter leaves the factory, the intermediate gear is 17 teeth each, the gear on the pressing wheel is generally 19 teeth, the gear on the seed dispenser shaft is generally 20 teeth, and the plant spacing is 21cm.

If you want to increase or decrease the plant spacing, you can change the sprockets with each other, and the number of teeth may be different for different tools, but the adjustment method is the same.

The adjustment method of the hand-pushed corn seeder: the adjustment of the corn plant spacing is mainly changed by replacing the transmission sprocket, and when the planter leaves the factory, the intermediate gear is 17 teeth, the gear on the pressing wheel is generally 19 teeth, the gear on the seed shooter shaft is generally 20 teeth, and the plant spacing is 21cm. If you want to increase or decrease the plant spacing, you can replace the chain celery Bishan wheel with each other, and the number of teeth of the machine may be different but the adjustment method is the same.

We hope you found this helpful, and we apologize for any trouble caused.

Hello dear! We'll be happy to answer for you. What to do with double grains under the corn planterA:

Kiss you with a good cover, one side of the seed shooter of the corn planter has an adjustment handball, the partition of the seed shooter can be moved up and down when pulled outward, at this time, the upward adjustment can be sown small seed corn, downward can be sown large seed corn, after the adjustment, turn the ground wheel ** on the row of seeds, if there is no cavity or double seed phenomenon (stable single grain seeding) can be operated in the ground. Precautions: Larger or smaller corn kernels need to be adjusted by replacing the spoon wheel.