What is the soft film light box, and what material is the film on the soft film light box made of?

The difference between a soft film light box and an ordinary light box:

The difference between the Kabu light box and the Rab light box is not big, many people think that it is the same kind of light box, here is a brief introduction to the difference between the two:

1. The Kabu light box is made of high-quality aluminum alloy, if the picture is too large, the Kabu light box can be displayed in multiple combinations.

The Kabu lightbox is similar to the Rabu Lightbox, and it can also be seen as a special Rabu Lightbox, which is different from the Rabu Lightbox, and the canvas of the Kabu Lightbox is stuck in the card slot of the lightbox frame with adhesive strips. The Rab light box is generally hung on the wall on one side, but the Kabu light box can be hung in the air, displayed with a large double-sided picture, supported independently, and displayed from all aspects to the greatest extent.

2. According to the division of light sources, the more common ones are CCFL light boxes, EEFL light boxes, and LED light boxes. The Rab light box is reinforced with high-quality aluminum alloy and has a wide range of styles, and the Rab light box adopts a unique four-sided open cover and track slide hook design, which is very convenient to change the picture.

-The technical team of Birdman light electric light box will answer for you, I hope to help you, and if you have any questions, you can consult us.

The soft film light box is a Kabu light box, which is made of Kabu aluminum profile frame, built-in LED light bar, and the picture is UV soft film. Because the soft film is stuck into the U-shaped groove of the profile with a four-sided seam adhesive strip, it is called a card light box.

There is no limit to the size of the light box, the thickness is from 3cm-16cm, and the regular thickness is 8cmTianlang logoThe 8cm card light box** is 208 yuan per square meter. The installation methods of the light box are wall-mounted, hanging and vertical, and can be made into single-sided, double-sided, special-shaped, etc.

The membrane of the soft film light box is a high-grade new environmentally friendly material. The texture is flexible, the color is rich, and the shape can be pulled at will, completely breaking through the limitations of the traditional light box in terms of degree modeling, color, and small assembly.

Flexible membranes were created in Switzerland in the 19th century and are made of special polyvinyl chloride.

made of material , it weighs about 180 320 grams per square meter, and its fire rating is B1. The production of soft film pictures requires the size of the card cloth light box, which is spray-painted with a UV machine, and then cropped and sewn with adhesive strips. The stability of the soft film dimensions is in Celsius.

15 degrees to 45 degrees.

Summary. The lamp for soft film ceiling can be T5 or T8 tube, or LED strip.

The lamp for soft film ceiling can be T5 or T8 tube, or LED strip.

The lamp for soft film ceiling can be T5 or T8 tube, or LED strip.

LED strip light is conventionally divided into two types: flexible LED strip light and LED hard strip light, but generally such as brother hole also contains old-fashioned light strips that are connected to LED with wires, such as flat three-line meters, flat four-line meters, flat five-line hail line meter light strips, etc. Because the soft film ceiling is different from the general industrial products, the function and form of the soft film ceiling are different with the actual needs of the designer and the user. Almost every project has its own unique form and structure, which requires different construction methods and structural organization requirements at the time of production.

The white soft film 5 m x 3 m can not have a shadow with any lamp. led

The installation of the soft film light box is divided into the following steps, mainly including the pre-construction inspection of the equipment, the understanding of the drawings, the preparation of materials, the splicing installation, the connection and installation of the power supply.

1. Check before installation. Observe whether there are installation conditions on the site and whether there is an installation method at the stress point.

2. Understand the drawings. Comply with the drawings and the materials and equipment required for installation, and make the finished flexible film light box according to the design requirements of the drawings.

3. Prepare materials. Prepare soft film aluminum profiles and accessories base plate, power supply, light cloth, screwdriver, screws, adhesive tape, gloves and other materials.

4. Splicing soft film type. Splicing at a 45° angle, first combine the frame splicing of the soft film profile, and then match the chamfering line. Check that the diagonal of the soft film profile is consistent and make simple adjustments.

5. Fixed boundaries. Attach the lightbox frame to the wall, mark the location first, and then install it on the wall. Tighten the screws on the yin and yang angles with a screwdriver to make sure the diagonals are equal.

6. Connect the power supply. Place the backplate inside the soft film light box frame and fix it with screws, then place the LED strip on the backplate and fix it with double-sided tape or screws.

7. Installation. Install the soft film light box on the wall as required, and fix the four sides with screws according to the actual situation. Then use a hair dryer to blow the screen folding.

Installing the soft film light box can be divided into the following steps, mainly checking the equipment before work, understanding the drawings, preparing the materials, splicing and installing, connecting the power supply, and installing.

1. Inspection before installation work. Observe whether the location has the installation conditions, whether the stressed point is available, and the installation method.

2. Understand the drawings. Observe the drawings and the materials and equipment required for installation, and make the finished soft film light box according to the design requirements of the drawings.

3. Prepare materials. Prepare the soft film aluminum profile and accessories base plate, power supply, lamp cloth, screwdriver, screws, adhesive tape, gloves and other materials to be used.

4. Splicing soft film type. According to the 45° corner, the soft film profile is first combined with the frame, and the corner line is put together. Check that the diagonal of the soft film profile is the same and make a simple adjustment.

5. Fix the frame. Fix the light box frame on the wall, position and mark it before installing it on the wall. The screws on the inner and outer corner codes are tightened with a screwdriver to ensure that the diagonals are equal.

6. Connect the power supply. Put the backplate into the soft film light box frame, fix it with screws, and then lay LED strips on the backplate and fix it with double-sided tape or screws.

7. Installation. Install the soft film light box on the wall according to the requirements, and fasten the four sides with screws according to the actual situation. Then use a hair dryer to blow the folds of the screen.

1.First go to the construction site to see if there are conditions and install the keel: that is, to see whether the wall on the site is completed, whether the carpentry part is qualified, and the plastering part needs to be completed first.

Special attention should be paid to the carpentry part must be done in accordance with the requirements we put forward, and the size of the opening holes such as lamps and tuyeres should be processed in advance.

2.The site conditions permit the party to enter the construction, first of all, according to the drawing design requirements of the carpenter to do a good part of the fixing of the aluminum alloy keel keel, pay attention to the angle must be flat and smooth at the right angle, and the connection should be flat and dense.

3.Note that the lamp stand, tuyere, and light pipe tray should be level with the surrounding keel, and should be firm and stable, and should not swing.

4.Smoke detector, ceiling lamp, first position and then make a wooden underframe, the bottom surface of the wooden underframe should be polished smooth, and pay attention to the horizontal height, too low is easy to highlight the traces of the underframe.

5.Before installing the ceiling, carefully check whether the keel joint is firm and smooth, the sprinkler head should be glued with white tape, and the tuyere should be properly handled. When installing the ceiling, it should be fixed from the middle to both sides, and at the same time pay attention to the size of both sides, pay attention to the welding seam to be straight and finally make the corner, and pay attention to be smooth and smooth.

After the four weeks are done, trim and remove the excess ceiling. Achieve the perfect edge closure.

Flexible film light box is a common advertising display medium, which has the advantages of high brightness, energy saving and environmental protection, and easy replacement of advertising content, so it has been widely used. Although the advantages of flexible film light boxes are well known, many people are not clear about what kind of material flexible film light boxes are made of. Let's analyze it in detail.

What is the material of the soft film light box?

First, the production materials of the soft film light box.

The production materials of the soft film light box are mainly made of highly transparent acrylic sheet and PVC soft film, as well as auxiliary materials such as LED strip light. Acrylic sheet is one of the main materials used to make light box panels, which has the advantages of high transparency, high hardness, and not easy to deform; PVC soft film is a commonly used material for art masters, which has the characteristics of strong plasticity, various color and pattern combinations, and long life. LED strip light realizes the luminous effect of the light box, and the characteristics of low power, long life and uniform light source are in a more important position in the light box market.

Second, the production process of soft film light box.

The production process of soft film light box is mainly divided into three types: glue filling type, U-shaped card slot type and skeleton hanging type. Among them, the glue pouring type is to use the glue between the acrylic board and the PVC soft film for bonding to achieve a good display effect; The U-shaped card slot type uses the U-shaped card slot to fix the light box panel and the light box skeleton to form a continuous and unified display surface; The skeleton hanging type is to hang the acrylic sheet and PVC soft film on the skeleton to achieve the display effect.

What is the material of the soft film light box?

Third, the advantages of flexible film light box.

With its unique display effect and wide applicability, the soft film light box has received more and more attention in the advertising industry. It has several advantages:

1.High-quality materials that guarantee high transparency and reusability.

2.The unique production process can customize the size and display effect according to the needs.

3.High brightness, low power consumption, energy saving and environmental protection.

4.It is especially convenient when changing the content and combination of advertisements.

Conclusion: In short, as a kind of exhibition and display medium, the flexible film light box has been more and more widely used in various places and industries with its advantages of high transparency and strong applicability. I hope today's content can bring you some basic knowledge about the flexible film light box, and you are also welcome to leave a message in the comment area to share your views on the soft film light box.

The production process of light box soft film needs to be used: cloth.

Light box aluminum profile.

Light box backplane, LED strip light, 12V power supply. The steps are as follows:

1. According to the length and width provided by the customer, cut the aluminum profile of the purchased light box at a 45 degree angle.

2. Cut the required backplate according to the size of the bottom of the light box.

3. Splice the aluminum and clamp the back plate on the bottom frame of the aluminum, and pay attention to the installation method of the connecting corner.

4. Install the prepared LED roller shutter cloth strip light.

5. Now connect the prepared 12V power supply.

6. Install Wei County.

Prepared soft film on the card on the light box.

7. That's it, you just need to turn on the power to confirm.