My router is often disconnected now, and the WAN port indicator often goes off

It is normal for the router to be disconnected, but it should be abnormal if it is often disconnected, and it is necessary to consider the hardware quality problem or the software firmware version problem.

A good router brand will generally choose the goods of the top quality of the top business, imagine the patch technology of small workshops and large factories, and the control rate of defective products is also the same.

Of course, now the low-end router technology has been basically perfected, and there will be no problem with buying a brand at will, as an electronic product itself is prone to problems, considering that it is now cheaper, you can just change a router within 100 yuan to replace it, to see if it is a router problem, or a problem with the network and cats at the upper end.

PS: Now it is generally suitable to buy some cheaper ones for home use, and the recommended brand order is Linksys, Netgear, Dlink, TPLINK, Mercury, Tengda, etc. Even if which one is cheaper to buy which, it's not wrong, it's enough for home use, and generally good ones are also making a fuss about management and connection numbers, and they don't need it at home.

The WAN port is often off, indicating that there is a problem with the physical link between your router and the operator's switching equipment, find the operator's maintenance personnel to take a look, speculate on the reason: the network cable is damaged and the contact is poor, the crystal head is not done well, and the equipment is unstable.

If the connection is dropped, the WAN port indicator will often go out, and the access error will be displayed when the web page is opened

How to solve the problem of the red light on the red light of the router, hello! Solution:1

Check whether the optical fiber interface plugged into the modem is loose, and if it is loose, plug it back in. 2.Restart the modem, turn off the power supply to the modem, wait for a few minutes, and then turn on the power.

3.If there is a problem with the optical interface of the optical modem, you need to replace the optical modem. 4.

Broadband arrears. Nowadays, broadband is basically a postpaid model, because the arrears are too long, the operator directly turns off the user's broadband, in this case, you need to pay off the arrears to recover. 5. After the car cavity is completed into the previous method, if the light modem is still flashing red, then it is recommended to call the customer service of the broadband operator**, report the fault, and let the operator send someone to overhaul the broadband.

Hope it helps!

1. Check whether the router is connected to the Internet: Check whether the WAN port of the router has been connected to the Internet, check whether the broadband dial-up is normal, if it is not connected to the Internet, you need to check whether the broadband dial-up settings are correct, or whether the dial-up software is installed correctly and is running normally. 2. Check whether the WAN port of the router is correctly connected

Check whether the WAN port of the router is connected correctly, check whether the router is connected to the network cable correctly, check whether the network cable is damaged, and check whether the network cable is plugged in backwards. 3. Check whether the router is faulty: If the WAN port is connected correctly, but the red light is still bright, you can rule out the network environment problem, you can consider the router failure, you can try to restart the router, if the red light is still on, you can consider replacing the router.

1. Normal flashing, signal light flashing means that there is network data in transmission.

2. If the mobile phone can be connected to wireless but cannot be used, see if there is a problem with the router's Internet parameter settings, if it is suddenly unable to access the Internet, it is recommended to restart the router to see if it can be solved.

A wireless router is a router that is used for users to surf the Internet and has a wireless coverage function. A wireless router can be seen as a device that sends broadband network signals from the wall of your home to nearby wireless network devices (laptops, Wi-Fi-enabled mobile phones, tablets, and all Wi-Fi enabled devices) through the antenna. Popular wireless routers on the market generally support four access modes: dedicated line XDSL cable, dynamic XDSL, and PPTP, and it also has some other network management functions, such as DHCP service, NAT firewall, MAC address filtering, dynamic domain name and other functions.

Popular wireless routers on the market generally can only support 15-20 devices at the same time. The signal range of a general wireless router is 50 meters, and now some wireless routers have a signal range of 300 meters.

The reason why the router LOS flashes red (most routers) is because the network cable is not connected properly, you plug and unplug it withExtranetIf the connected line does not work, it may be that the operator's equipment is out of power or there is a problem with the line, you can directly call ** and let them repair it.

LOS flashing red light means that the line is broken or the optical power is insufficient, and you unplug it once, it is estimated that it is caused by not plugging it in because you unplugged it.

Precautions for using routers.

Wireless routers.

During the operation of the work, it will constantly heat up to the surroundings.

If the internal heat dissipation of the router is poor, it will not only affect the life of the router, but also may lead to a strike or network instability. Therefore, it is best not to place the wireless router in some narrow and sealed drawers and other places, but in some places with good fluency and easy heat dissipation, and at the same time pay attention to stay away from the induction cooker.

Refrigerators and other electronic products to prevent signal interference by the limbs.

It is necessary to pay attention to the long-term and endless work, which will lead to problems such as hanging of the router equipment, it is best to disconnect the power supply and turn off the wireless router after a while, so that it can rest for a while.

Look at whether the optical fiber interface plugged into the optical modem is loose, if it has been loosened, re-eliminate and plug it in.

Restart the modem, cut off the power of the modem, wait for a few minutes, and then turn on the power.

If there is a problem with the optical interface of the optical modem, you need to replace the optical modem.

It is recommended that one is to restart the router, if there is no improvement, the second is to check whether the connection line between the router and the optical modem is normal, and the third is to check whether the optical modem is working normally.

The wireless router BAI has the following lights to prompt.

1. The electric source indicator, continuous and stable shih luminescence indicates that the connection with the power supply is correct, which is a small sun.

2. The lnternet port indicator light, which is always on, indicates that it is connected, and there is a data transmission flashing This is the Internet prompt light, which is the indication of IE.

3. The wireless status indicator is always on, and it flashes when there is data transmission. Indication of wireless ripples.

4. The LAN port indicator light is continuous and stable to indicate that ports 1 -4 have been correctly connected to the computer, and flashing indicates that there is data transmission.

In fact, the WAN indicator is the Internet light, and the normal working state is constantly flashing, indicating that the network transmission is normal. Whereas.

If the WAN indicator is always on, the wireless router does not transmit data to the network, and the network cannot be used normally. It is recommended to start with none.

Restart the line router and modem to see if it is normal, if the fault is still there, it is recommended to call customer service directly for repair, general.

If the WAN indicator is abnormal, it may be connected to the Internet or the modem may be faulty.

As long as the network WAN port is used, the indicator will flash, and the larger the data traffic, the more frequent the flashing. Even if you don't use the net, it will flicker, but the frequency of blinking is low.

Restore the router to factory settings, how to restore.

I read the manual by myself and manage the incoming route.

Daoip, how much is the internal management IP of the pipe, read the manual.

Yes, it's done activating ADSL

Is the light on the router yellow light.

It has been lit to indicate that it is connected, it should be a problem with the computer, see if the local connection is disabled or virus-killing, if it is not connected, call ** to telecom 10000, consult the situation, it may be in arrears.

By the way, what color is the light when it flashes?? , maybe the physical link is broken, hehe, try to change the network cable.

It means that the connection is normal, and it shows that it is working!

The instructions are already connected.